References
- Trevisan F, Calignano F, Lorusso M, et al. On the selective laser melting (SLM) of the AlSi10Mg alloy: process, microstructure, and mechanical properties. Materials. 2017;10(1):76.
- Contuzzi N, Campanelli SL, Caiazzo F, et al. Design and fabrication of random metal foam structures for laser powder bed fusion. Materials. 2019;12(8):1301.
- Kozak J, Zakrzewski T, Witt M, et al. Selected problems of additive manufacturing using SLS/SLM processes. Trans Aerosp Res. 2021;2021(1):24–44.
- Zhang B, Li Y, Bai Q. Defect formation mechanisms in selective laser melting: a review. Chin J Mech Eng. 2017;30:515–527.
- Chen J, Hou W, Wang X, et al. Microstructure, porosity and mechanical properties of selective laser melted AlSi10Mg. Chin J Aeronaut. 2019;33:2043–2054.
- Stef J, Poulon A, Redjaïmia A, et al. Mechanism of porosity formation and influence on mechanical properties in selective laser melting of Ti-6Al-4 V parts. Mater Des. 2018:480–493. https://doi.org/10.1016/j.matdes.2018.06.049.
- Khairallah SA, Anderson AT, Rubenchik A, et al. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones.
- Obidigbo C, Tatman EP, Gockel J. Processing parameter and transient effects on melt pool geometry in additive manufacturing of invar 36. Int J Adv Manuf Technol. 2019;104:3139–3146.
- Saunders R, Rawlings A, Birnbaum A, et al. Additive manufacturing melt pool prediction and classification via multifidelity Gaussian process surrogates. Integr Mater Manuf Innov. 2022;11:497–515.
- Mukherjee T, DebRoy T. Mitigation of lack of fusion defects in powder bed fusion additive manufacturing. J Manuf Process. 2018;36:442–449. https://doi.org/10.1016/j.jmapro.2018.10.028.
- Tang M. Inclusions, porosity, and fatigue of AlSi10Mg parts produced by selective laser melting, 2017.
- Ning J, Wang W, Zamorano B, et al. Analytical modeling of lack-of-fusion porosity in metal additive manufacturing. Appl Phys A. 2019;125:1–11.
- Wang W, Ning J, Liang SY. Analytical prediction of balling, lack-of-fusion and keyholing thresholds in powder Bed fusion. Appl Sci. 2021;11(24):12053.
- Ansari M, Nguyen D-S, Park H. Investigation of SLM process in terms of temperature distribution and melting pool size: modeling and experimental approaches. Materials. 2019;12:1272–1284. https://doi.org/10.3390/ma12081272.
- Jafari D, Wits WW, Vaneker TH, et al. Pulsed mode selective laser melting of porous structures: structural and thermophysical characterization. Addit Manuf. 2020;35:102–136.
- White JP, Read N, Ward RM, et al. Prediction of melt pool profiles for selective laser melting of AlSi10Mg alloy. Materials Science and Technology Conference and Exhibition 2014, MS and T 2014; 2014. 3. 1985–1992.
- Ullah R, Lian J, Akmal J, et al. Prediction and validation of melt pool dimensions and geometric distortions of additively manufactured AlSi10Mg, 2022.
- Moussaoui K, Rubio W, Mousseigne M, et al. Effects of selective laser melting additive manufacturing parameters of inconel 718 on porosity, microstructure and mechanical properties. Mater Sci Eng A. 2018;735:182–190. ISSN 0921-5093.
- Ferro P, Meneghello R, Savio G, et al. A modified volumetric energy density–based approach for porosity assessment in additive manufacturing process design. Int J Adv Manuf Technol. 2020;110:1911–1921.
- Bayat M, Dong W, Thorborg J, et al. A review of multi-scale and multi-physics simulations of metal additive manufacturing processes with focus on modeling strategies. Addit Manuf. 2021;47:102278. ISSN 2214-8604.
- Promoppatum P, Srinivasan R, Quek SS, et al. Quantification and prediction of lack of-fusion porosity in the high porosity regime during laser powder bed fusion of Ti-6Al-4 V. J Mater Process Technol. 2022;300:118–127.
- Abu-Lebdeh T, Damptey R, Lamberti V, et al. (2019). Powder packing density and its impact on SLM-based additive manufacturing.
- Yuan W, Chen H, Cheng T T, et al. Effects of laser scanning speeds on different states of the molten pool during selective laser melting: simulation and experiment. Mater Des. 2020;189:108542, doi:10.1016/j.matdes.2020.108542.
- Zhuang JR, Lee YT, Hsieh YH, et al. Determination of melt pool dimensions using DOE-FEM and RSM with process window during SLM of Ti6Al4V powder. Opt Laser Technol. 2018;103:59–76.
- Kheirabadi AC, Groulx D. The effect of the mushy-zone constant on simulated phase change heat transfer. Proceedings of CHT-15; 2015; Piscataway, USA.
- Laakso P, Riipinen T, Laukkanen A, et al. Optimization and simulation of SLM process for high density H13 tool steel parts. Phys Procedia. 2016;83:26–35. https://doi.org/10.1016/j.phpro.2016.08.004.
- Kerslake TW. Experiments with phase change thermal energy storage canisters for space station freedom. 26th Interso¢iety Energy Conversion Engineering Conference; 1991; Boston, Mass., p. 248–261. (see also NASA TM-104427).
- Liu B, Li B, Li Z, et al. Numerical investigation on heat transfer of multi-laser processing during selective laser melting of AlSi10Mg. Results Phys. 2019;12(2019):454–459.
- Aboulkhair NT, Maskery I, Tuck C, et al. The microstructure and mechanical properties of selectively laser melted AlSi10Mg: the effect of a conventional T6-like heat treatment. Mater Sci Eng A. 2016;667:139–146.
- Caiazzo F. Additive manufacturing by means of laser-aided directed metal deposition of titanium wire. Int J Adv Manuf Technol. 2018;96:2699–2707.
- Zyguła K, Nosek B, Pasiowiec H, et al. Mechanical properties and microstructure of AlSi10Mg alloy obtained by casting and SLM technique. WSN. 2018;104:462–472.
- Fiedler T, Dörries K, Rösler J. Selective laser melting of Al and AlSi10Mg: parameter study and creep experiments. Prog Addit Manuf. 2021;7:583–592. https://doi.org/10.1007/s40964-021-00248-5.
- Astakhov V. (2012). Design of experiment methods in manufacturing: basics and practical applications.
- Zhirnov I, Kotoban DV, Gusarov AV. Evaporation-induced gas-phase flows at selective laser melting. Appl Phys A. 2018;124:157.