Tribological behaviour and wear mechanism of ADI with different hardness values

References

• Tanaka Y, Kage H. Development and application of austempered spheroidal graphite cast iron, materials transactions. JIM. 1992;33(6):543–557.
   Web of Science ®Google Scholar
• Liu C, Yang C, Yuan L, et al. Role of pre-formed martensite on transformation of austempered ductile iron. Mater Sci Technol. 2017;33(15):1819–1828.
   Web of Science ®Google Scholar
• Bosnjak B, Verlinden B, Radulovic B. Dry sliding wear of low alloyed austempered ductile iron. Mater Sci Technol. 2003;19(5):650–656.
   Web of Science ®Google Scholar
• Bai J, Xu H, Chen X. Effect of tempering temperature on the wear behaviour of martensitic ductile iron. Mater Sci Technol. 2022;39(6):744–755.
   Web of Science ®Google Scholar
• Wang B, Barber GC, Qiu F, et al. A review: phase transformation and wear mechanisms of single-step and dual-step austempered ductile irons. J Mater Res Technol. 2020;9(1):1054–1069.
   Google Scholar
• Popov VL. Generalized archard law of wear based on rabinowicz criterion of wear particle formation. Facta Univ Ser Mech Eng. 2019;17(1):39–45.
   Web of Science ®Google Scholar
• Ju CP, Chen CH, Rigsbee JM. Laser surface modification of ductile iron: part 2 wear mechanism. Mater Sci Technol. 1988;4(2):167–172.
   Web of Science ®Google Scholar
• Zhang D, Li Y, Du X. Microstructure and tribological performance of boride layers on ductile cast iron under dry sliding conditions. Eng Fail Anal. 2022;134:179–189.
   Web of Science ®Google Scholar
• Han X, Zhang Z, Pan Y. Sliding wear behavior of laser surface hardened austempered ductile iron. J Mater Res Technol. 2020;9(6):14609–14618.
   Google Scholar
• Fordyce EP, Allen C., The dry sliding wear behaviour of an austempered spheroidal cast iron. Wear. 1990;135(2):265–278.
   Web of Science ®Google Scholar
• Du Y, Gao X, Wang X. Tribological behavior of austempered ductile iron (ADI) obtained at different austempering temperatures. Wear. 2020;456-457:203396.
   Web of Science ®Google Scholar
• Sarmadi H, Kokabi AH, Seyed Reihani SM. Friction and wear performance of copper–graphite surface composites fabricated by friction stir processing (FSP). Wear. 2013;304(1):1–12.
   Web of Science ®Google Scholar
• Hatate M, Shiota T, Takahashi N, et al. Influences of graphite shapes on wear characteristics of austempered cast iron. Wear. 2001;251(1):885–889.
   Web of Science ®Google Scholar
• Batra U, Singh M, Sharma SK. Effect of austempering temperature on microstructure and tribological behaviour of hypoeutectic austempered ductile iron alloyed with copper, tribology-materials. Surf Interf. 2022;10:1–14.
   Google Scholar
• Straffelini G, Giuliari C, Pellizzari M. Dry rolling-sliding wear of austempered cast iron. Wear. 2011;271(9):1602–1608.
   Web of Science ®Google Scholar
• Yan G, Xu Y, Jiang B. The production of high-density hollow cast-iron bars by vertically continuous casting. J Mater Process Tech. 2012;212(1):15–18.
   Web of Science ®Google Scholar
• Han C, Zhou W, Sun Y, et al. Effect of austempering temperature on microstructure and properties of austempered ductile iron. Int J Microstruct Mater Prop. 2018;13(5):344–357.
   Google Scholar
• Wang X, Du Y, Liu B, et al. Enhanced plasticity of austempered ductile iron (ADI) by partitioning treatment. Mat Sci Eng A. 2021;804:140513.
   Web of Science ®Google Scholar
• Sellamuthu P, Samuel DH, Dinakaran D. Austempered ductile iron (ADI): influence of austempering temperature on microstructure, mechanical and wear properties and energy consumption. Metals. 2018;8(1):53–64.
   Web of Science ®Google Scholar
• Zhao J, Lv B, Zhang F. Effects of austempering temperature on bainitic microstructure and mechanical properties of a high-C high-Si steel. Mater Sci Eng A. 2019;742:179–189.
   Web of Science ®Google Scholar
• Khun N, Frankel G, Sumption M. Effects of normal load, sliding speed, and surface roughness on tribological properties of niobium under dry and wet conditions. Tribol Trans. 2014;57(5):944–954.
   Web of Science ®Google Scholar
• Du Y, Wang X, Zhang D. A superior strength and sliding-wear resistance combination of ductile iron with nanobainitic matrix. J Mater Res Technol. 2021;11:1175–1183.
   Google Scholar
• Sugishita J, Fujiyoshi S. The effect of cast iron graphites on friction and wear performance I: graphite film formation on grey cast iron surfaces. Wear. 1981;66(2):209–221.
   Web of Science ®Google Scholar
• Suh N, Sridharan P. Relationship between the coefficient of friction and the wear rate of metals. Wear. 1975;34(3):291–299.
   Web of Science ®Google Scholar
• Riahi AR, Alpas AT. Wear map for grey cast iron. Wear. 2003;255(1):401–409.
   Google Scholar
• Sugishita J, Imura T, Fujiyoshi S. A study of cast alloys with partially dispersed graphite III: characterization of high density dispersed surfaces. Wear. 1983;87(2):181–190.
   Web of Science ®Google Scholar
• Straffelini G, Pellizzari M, Maines L. Effect of sliding speed and contact pressure on the oxidative wear of austempered ductile iron. Wear. 2011;270(9):714–719.
   Web of Science ®Google Scholar
• Quinn TFJ, Sullivan JL, Rowson DM. Origins and development of oxidational wear at low ambient temperatures. Wear. 1984;94(2):175–191.
   Web of Science ®Google Scholar
• Kumar S, Bhattacharyya A, Mondal DK. Dry sliding wear behaviour of medium carbon steel against an alumina disk. Wear. 2011;270(5-6):413–421.
   Web of Science ®Google Scholar
• Straffelini G, Trabucco D, Molinari A. Oxidative wear of heat-treated steels. Wear. 2001;250(1):485–491.
   Web of Science ®Google Scholar
• Ashby M, Abulawi J, Kong H. On surface temperatures at dry sliding surfaces. Cambridge: University of Cambridge, Department of Engineering; 1990.
   Google Scholar
• Mao L, Cai M, Liu Q, et al Effects of sliding speed on the tribological behavior of AA 7075 petroleum casing in simulated drilling environment. Tribol Int. 2020;145:106194.
   Web of Science ®Google Scholar
• Dan W, Li S, Zhang W. The effect of strain-induced martensitic transformation on mechanical properties of TRIP steel. Mater Des. 2008;29(3):604–612.
   Web of Science ®Google Scholar
• Prado JM, Pujol A, Cullell J. Dry sliding wear of austempered ductile iron. Mater Sci Technol. 1995;11(3):294–298.
   Web of Science ®Google Scholar
• Mahieu J, De Cooman B, Maki J. Phase transformation and mechanical properties of Si-free CMnAl transformation-induced plasticity-aided steel. Metall Mater Trans A. 2002;33(8):2573–2580.
   Web of Science ®Google Scholar