Study on brazing WC-6Co/In718 with in-situ synthesis of Ni/Cu/AgCuNiMn solder

References

• Bobzin K, Öte M, Hebing J. Approaches and possibilities for reducing residual stresses in induction brazed cemented carbide/steel joints. Weld World. 2020;64(9):1579–1587.
   Web of Science ®Google Scholar
• Gao Z, Liu B, Zheng LY, et al. Experiment of low temperature mechanical properties for brazing structure of hard alloy steel and structural steel. J Nanjing U Aeronaut Astronautics. 2022;54(3):404–410.
   Google Scholar
• Du JH, Lu XD, Deng Q, et al. Progress in GH4169 alloy development. Mater. China. 2012;31(12):12–20 + 11.
   Google Scholar
• Huang X, Miglietti W. Wide gap braze repair of gas turbine blades and vanes – a review. J Eng Gas Turbines Power. 2012;134(1):010801.
   Web of Science ®Google Scholar
• Wu X, Chandel RS, Li H, et al. Induction brazing of Inconel 718 to Inconel X-750 using Ni–Cr–Si–B amorphous foil. J Mater Process Technol. 2000;104(1):34–43.
   Web of Science ®Google Scholar
• Bridges D, Ma C, Palmer Z, et al. Laser brazing of Inconel® 718 using Ag and Cu-Ag nanopastes as brazing materials. J Mater Process Technol. 2017;249:313–324.
   Web of Science ®Google Scholar
• Zhang XZ, Liu GW, Tao JN, et al. Vacuum brazing of WC-8Co cemented carbides to carbon steel using pure Cu and Ag-28Cu as filler metal. J Mater Eng Perform. 2017;26(2):488–494.
   Web of Science ®Google Scholar
• Yin X, Ma Q, Cui B, et al. Current review on the research status of cemented carbide brazing: filler materials and mechanical properties. Met Mater Int. 2021;27(4):571–583.
   Web of Science ®Google Scholar
• Kaiwa K, Yaoita S, Sasaki T, et al. Effects of Ni and Co additions to filler metals on Ag-brazed joints of cemented carbide and martensitic stainless steel. Adv Mat Res. 2014;922:322–327.
   Google Scholar
• Ray N, Froyen L, Vanmeensel K, et al. Wetting and solidification of silver alloys in the presence of tungsten carbide. Acta Mater. 2018;144:459–469.
   Web of Science ®Google Scholar
• Zheng Y, Li N, Yan J, et al. The microstructure and mechanical properties of 1Cr17Ni2/QAl7 brazed joints using Cu-Mn-Ni-Ag brazing alloy. Mater Sci Eng, A. 2016;661:25–31.
   Web of Science ®Google Scholar
• Wang J, Xiong Q, Wang J, et al. Microstructure and mechanical properties of YG8/IN718 alloy joints prepared by vacuum brazing. Vacuum. 2019;169:108942.
   Web of Science ®Google Scholar
• Long WM, Zhang GX, Zhang QK. In situ synthesis of high strength Ag brazing filler metals during induction brazing process. Scr Mater. 2016;110:41–43.
   Web of Science ®Google Scholar
• Chen H, Feng K, Xiong J, et al. Characterization and stress relaxation of the functionally graded WC–Co/Ni component/stainless steel joint. J Alloys Compd. 2013;557:18–22.
   Web of Science ®Google Scholar
• Binesh B. Diffusion brazing of IN718/AISI 316L dissimilar joint: microstructure evolution and mechanical properties. J Manuf Process. 2020;57:196–208.
   Web of Science ®Google Scholar
• Barrena MI, Gómez de Salazar JM, Matesanz L. Interfacial microstructure and mechanical strength of WC–Co/90MnCrV8 cold work tool steel diffusion bonded joint with Cu/Ni electroplated interlayer. Mater Des. 2010;31(7):3389–3394.
   Web of Science ®Google Scholar
• Song X, Li H, Casalegno V, et al. Microstructure and mechanical properties of C/C composite/Ti6Al4V joints with a Cu/TiCuZrNi composite brazing alloy. Ceram Int. 2016;42(5):6347–6354.
   Web of Science ®Google Scholar
• Yaoita S, Watanabe T, Sasaki T. Effects of Ni and Co elements in filler metals in Ag brazing of cemented carbide. Mater Res Innovations. 2013;17(2):s142–s147.
   Google Scholar
• Bazhenov V. E, Pikunov M. V. Temperature-minimum line in the Cu-Ni-Mn phase diagram. Steel in Translation. 2010;40:225–228.
   Google Scholar
• Jiang C, Chen H, Wang Q, et al. Effect of brazing temperature and holding time on joint properties of induction brazed WC-Co/carbon steel using Ag-based alloy. J Mater Process Technol. 2016;229:562–569.
   Web of Science ®Google Scholar
• Huang SW, Zhou PF, Luo FX, et al. Effects of Ni and Mn contents on precipitation and strengthening behavior in Cu-Ni-Mn ternary alloys. Mater Charact. 2023;199:112775.
   Web of Science ®Google Scholar