Micromechanics-based understanding of the stability of film-like austenite in steels

References

• McMeeking RM, Evans AG. Mechanics of transformation-toughening in brittle materials. J Am Ceram Soc. 1982;65(5):242–246. doi:10.1111/j.1151-2916.1982.tb10426.x
   Web of Science ®Google Scholar
• Jacques PJ, Delannay F, Ladrière J. On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels. Metall Trans A; 200(32):2759–2768.
   Google Scholar
• Timokhina IB, Hodgson PD, Pereloma EV. Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels. Metall Trans A. 2004;35:2331–2341. doi:10.1007/s11661-006-0213-9
   Web of Science ®Google Scholar
• Huo CY, Gao HL. Strain-induced martensitic transformation in fatigue crack tip zone for a high strength steel. Mater Charact. 2005;55(1):12–18. doi:10.1016/j.matchar.2005.02.004
   Web of Science ®Google Scholar
• Olson GB, Cohen M. Kinetics of strain-induced martensitic nucleation. Metall Trans A. 1975: 791–795. doi:10.1007/BF02672301
   Web of Science ®Google Scholar
• Olson GB. Transformation plasticity and toughening. J Phys IV. 1996;6:407.
   Google Scholar
• Zhang H, Pradeep KG, Mandal S, Ponge D, Springer H, Raabe D et al. Dynamic strain-induced transformation: an atomic scale investigation. Scr Mater. 2015;109:23–27. doi:10.1016/j.scriptamat.2015.07.010
   Web of Science ®Google Scholar
• Lee SJ, Lee S, De Cooman BC. Mn partitioning during the intercritical annealing of ultrafine-grained 6% Mn transformation-induced plasticity steel. Scr Mater. 2011;64(7):649–652. doi:10.1016/j.scriptamat.2010.12.012
   Web of Science ®Google Scholar
• Kumar G, Ghosh S, Pallaspuro S, et al. Fracture toughness characteristics of thermo-mechanically rolled direct quenched and partitioned steels. Mater Sci Eng A. 2022;840(142788).
   PubMed Web of Science ®Google Scholar
• Grajcar A, Kwaśny W, Zalecki W. Microstructure–property relationships in TRIP aided medium-C bainitic steel with lamellar retained austenite. Mater Sci Technol. 2015;31(7):781–794. doi:10.1179/1743284714Y.0000000742
   Web of Science ®Google Scholar
• Sugimoto KI. Fracture strength and toughness of ultra-high strength TRIP aided steels. Mater Sci Technol. 2009;25(9):1108–1117. doi:10.1179/174328409X453307
   Web of Science ®Google Scholar
• Zhao HS, Zhu X, Li W, et al. Austenite stability for quenching and partitioning treated steel revealed by colour tint-etching method. Mater Sci Technol. 2014;30(9):1008–1013. doi:10.1179/1743284714Y.0000000517
   Web of Science ®Google Scholar
• Wu R, Li W, Zhou S, et al. Effect of retained austenite on the fracture toughness of quenching and partitioning (Q&P)-treated sheet steels. Metall Trans A. 2014;45:1892–1902. doi:10.1007/s11661-013-2113-0
   Web of Science ®Google Scholar
• Wu R, Li J, Li W, et al. Effect of metastable austenite on fracture resistance of quenched and partitioned (Q&P) sheet steels. Mater Sci Eng A. 2016;657:57–63. doi:10.1016/j.msea.2016.01.051
   Web of Science ®Google Scholar
• Mei Z, Morris Jr JW. Analysis of transformation-induced crack closure. Eng Fract Mech. 1991;39(3):569–573. doi:10.1016/0013-7944(91)90068-C
   Web of Science ®Google Scholar
• Parker ER, Zackay VF. Enhancement of fracture toughness in high strength steel by microstructural control. Eng Fract Mech. 1973;5(1):147–165. doi:10.1016/0013-7944(73)90013-1
   Google Scholar
• Antolovich SD, Singh B. On the toughness increment associated with the austenite to martensite phase transformation in TRIP steels. Metall Trans B. 1971;2(8):2135–2141. doi:10.1007/BF02917542
   Web of Science ®Google Scholar
• Antolovich SD, Singh B. Observations of martensite formation and fracture in TRIP steels. Metallurg Trans. 1970;1(12):3463–3465. doi:10.1007/BF03037885
   Google Scholar
• Haidemenopoulos GN, Kermanidis AT, Malliaros C, et al. On the effect of austenite stability on high cycle fatigue of TRIP 700 steel. Mater Sci Eng A. 2013;573:7–11. doi:10.1016/j.msea.2013.02.015
   Web of Science ®Google Scholar
• Seo EJ, Cho L, Estrin Y, et al. Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel. Acta Mater. 2016;113:124–139. doi:10.1016/j.actamat.2016.04.048
   Web of Science ®Google Scholar
• de Diego-Calderón I, Rodriguez-Calvillo P, Lara A, et al. Effect of microstructure on fatigue behavior of advanced high strength steels produced by quenching and partitioning and the role of retained austenite. Mater Sci Eng A. 2015;641:215–224. doi:10.1016/j.msea.2015.06.034
   Web of Science ®Google Scholar
• Eckner R, Krüger L, Ullrich C, et al. Fracture toughness of high-alloy austenitic-martensitic TRIP steels after Q&P processing. Int J Fract. 2019;215:139–151. doi:10.1007/s10704-018-0332-5
   Web of Science ®Google Scholar
• Olson GB. Transformation plasticity and toughening. Le J de Physique IV. 1996 Jan 1;6(C1):C1–407.
   Google Scholar
• Xiong XC, Chen B, Huang MX, et al. The effect of morphology on the stability of retained austenite in a quenched and partitioned steel. Scr Mater. 2013;68(5):321–324. doi:10.1016/j.scriptamat.2012.11.003
   Web of Science ®Google Scholar
• Eshelby JD. The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc R Soc Lond. 1957;241(1226):376–396.
   Google Scholar
• Yang K, Ding W, Liu S, et al. Dominating role of film-like carbon-enriched austenite for the simultaneous improvement of strength and toughness in low-carbon steel. Steel Res Int. 2021;92(2):2000344. doi:10.1002/srin.202000344
   Web of Science ®Google Scholar
• Xiong ZP, Saleh AA, Marceau RK, et al. Site-specific atomic-scale characterisation of retained austenite in a strip cast TRIP steel. Acta Mater. 2017;134:1–15. doi:10.1016/j.actamat.2017.05.060
   Web of Science ®Google Scholar
• Takahashi M, Bhadeshia HKDH. A model for the microstructure of some advanced bainitic steels. Mater Trans JIM. 1991;32(8):689–696. doi:10.2320/matertrans1989.32.689
   Web of Science ®Google Scholar
• Ledbetter H, Dunn ML. Equivalence of Eshelby inclusion theory and Wechsler–Lieberman–Read, Bowles–Mackenzie martensite-crystallography theories. Mater Sci Eng A. 2000;285(1–2):180–185. doi:10.1016/S0921-5093(00)00697-3
   Web of Science ®Google Scholar
• Ledbetter H, Dunn ML. Habit planes, inclusion theory, and twins. Mater Sci Eng A. 1999;273-275:222–225. doi:10.1016/S0921-5093(99)00375-5
   Web of Science ®Google Scholar
• Tsukatani I, Hashimoto SI, Inoue T. Effects of silicon and manganese addition on mechanical properties of high-strength hot-rolled sheet steel containing retained austenite. ISIJ Int. 1991;31(9):992–1000. doi:10.2355/isijinternational.31.992
   Web of Science ®Google Scholar
• Moyer JM, Ansell GS. The volume expansion accompanying the martensite transformation in iron-carbon alloys. Metall Trans A. 1975: 1785–1791. doi:10.1007/BF02642308
   Web of Science ®Google Scholar
• Wechsler M, Lieberman D, Read T. On the theory of the formation of martensite. Trans AIME. 1953;197:1503.
   Google Scholar
• Nishiyama Z. Martensitic transformation. Elsevier Academic Press; Cambridge, Massachusetts, 2012.
   Google Scholar
• Mura T. Micromechanics of defects in solids. Spring Science Business Media; Nairobi; 2013.
   Google Scholar
• Patel JR J, Cohen M. Criterion for the action of applied stress in the martensitic transformation. Acta Metall. 1953;1(5):531–538. doi:10.1016/0001-6160(53)90083-2
   Google Scholar
• Luo H. Comments on “austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning” by S. Lee, SJ Lee and BC De Cooman. Scr Mater. 2012;66(10):829–831. doi:10.1016/j.scriptamat.2012.01.017
   Web of Science ®Google Scholar
• Bhadeshia H, Honeycombe R. Steels: microstructure and properties. Butterworth-Heinemann; Oxford; 2017.
   Google Scholar
• Dyson DJ, Holmes B. Effect of alloying additions on the lattice parameter of austenite. J Iron Steel Inst. 1970;208:469–474.
   Web of Science ®Google Scholar
• Han HN, Lee CG, Oh C-S, et al. A model for deformation behavior and mechanically induced martensitic transformation of metastable austenitic steel. Acta Mater. 2004;52(17):5203–5214. doi:10.1016/j.actamat.2004.07.031
   Web of Science ®Google Scholar
• Van Dijk NH, Butt AM, Zhao L, et al. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling. Acta Mater. 2005;53(20):5439–5447. doi:10.1016/j.actamat.2005.08.017
   Web of Science ®Google Scholar
• Dieter GE, Bacon D. Mechanical metallurgy. Vol. 3. New York: McGraw-hill; 1976.
   Google Scholar
• Wolfram Research, Inc. Champaign, IL (2022), Mathematica, Version 13.2.
   Google Scholar
• Kelly PM, Nutting J. The martensite transformation in carbon steels. Proc R Soc Lond A. 1961;259(1296):45–58.
   Google Scholar