118
Views
5
CrossRef citations to date
0
Altmetric
Original Articles

Optimising parameters for galvanostatic polyaniline coating on nanostructured bainitic steel

&

References

  • I. B. Timokhina, H. Beladi, X. Y. Xiong, Y. Adachi and P. D. Hodgson: ‘Nanoscale microstructural characterization of a nanobainitic steel’, Acta Mater., 2011, 59, 5511–5522. doi: 10.1016/j.actamat.2011.05.024
  • F. G. Caballero and H. K. D. H. Bhadeshia: ‘Very strong bainite’, Solid State Mater. Sci., 2004, 8, 251–257. doi: 10.1016/j.cossms.2004.09.005
  • F. G. Caballero, M. K. Miller, S. S. Babu and C. Garcia Mateo: ‘Atomic scale observations of bainite transformation in high carbon high silicon steel’, Acta Mater., 2007, 55, 381–390. doi: 10.1016/j.actamat.2006.08.033
  • H. K. D. H. Bhadeshia: ‘Large chunks of very strong steel’, Mater. Sci. Tech. Ser., 2005, 21, 1293–1302. doi: 10.1179/174328405X63999
  • H. K. D. H. Bhadeshia: ‘Nanostructured bainite’, P. Roy. Soci. Lond. A. Mat., 2009, 466, 3–18. doi: 10.1098/rspa.2009.0407
  • H. Farzad, H. R. Faridi, F. Rajabpour, A. Abolhasani, S. Kazemi and Y. Khaledzadeh: ‘Developing very hard nanostructured bainitic steel’, Mat. Sci. Eng. A-Struct., 2013, 559, 68–73. doi: 10.1016/j.msea.2012.08.020
  • P. Zhang, F. C. Zhang, Z. G. Yan, and C. L. Zheng: ‘N rich nanocrystalline bainite layer of carbon steel’, Surf. Eng., 2013, 29, 331–335. doi: 10.1179/1743294413Y.0000000123
  • H. Beladi, I. B. Timokhina, and P. D. Hodgson: ‘Characterization of nano-structured bainitic steel’, 2nd Int. Conf. on ‘Ultrafine Grained & Nanostructured Material’, Int. J. Mod. Phys., 2012, 5, 1–8. doi: 10.1142/S2010194512001778
  • O. Kazum, M. Bobby Kannan, H. Beladi, I. B. Timokhina, P. D. Hodgson and S. Khoddam: ‘Aqueous corrosion performance of nanostructured bainitic steel’, Mater. Design, 2014, 5, 467–471.
  • O. Kazum, M. Bobby Kannan, H. Beladi, I. B. Timokhina, P. D. Hodgson and S. Khoddam: ‘Selective dissolution of retained austenite in nano-bainitic steel’, Adv. Eng. Mater., 2013, 15, 1–3. doi: 10.1002/adem.201370001
  • B. N. Grgur, A. R. Elkais, M. M. Gvozdenovic, S. Z. Drmanic, T. L. Trisovic and B. Z. Jugovic: ‘Corrosion of mild steel with composite polyaniline coatings using different formulations’, Prog. Org. Coat., 2015, 79, 17–24. doi: 10.1016/j.porgcoat.2014.10.013
  • I. H. Karahan and A. Tozar: ‘Corrosion inhibition performance of polymer-alloy bilayer coatings: electropolymerised polyaniline and electrodeposited ZnNi with different layer orders’, T. I. Met. Finish, 2014, 92, 262–271. doi: 10.1179/0020296714Z.000000000189
  • A. C. Cascalheira, S. Aeiyach, P. C. Lacaze and L. M. Abrantes: ‘Electro-chemical synthesis and redox behavior of polypyrrole coatings on copper in salicylate aqueous solution’, Electrochim. Acta, 2003, 48, 2523–2529. doi: 10.1016/S0013-4686(03)00295-0
  • J. L. Camalet, J. C. Lacroix, T. Dung Nguyen, S. Aeiyach, M. C. Pham, J. Petit Jean and P. C. Lacaze: ‘Aniline electropolymerization on platinum and mild steel from neutral aqueous media’, J. Electroanal. Chem., 2000, 485, 13–20. doi: 10.1016/S0022-0728(00)00080-2
  • P. J. Kinlen, D. C. Silverman and C. R. Jeffreys: ‘Corrosion protection using polyaniline coating formulations’, Synthetic Met., 1997, 85, 1327–1332. doi: 10.1016/S0379-6779(97)80257-3
  • J. I. Martins, M. Bazzaoui, T. C. Reis, E. A. Bazzaoui and L. Martins: ‘Electrosynthesis of homogeneous and adherent polypyrrole coatings on iron and steel electrodes using a new electrochemical procedure’, Synthetic Met., 2002, 129, 221–228. doi: 10.1016/S0379-6779(02)00057-7
  • H. H. Zhou, S. Q. Jiao, J. H. Chen, W. Z. Wei and Y. F. Kuang: ‘Relationship between preparation conditions, morphology and electrochemical properties of polyaniline prepared by pulse galvanostatic method (PGM)’, Thin Solid Films, 2004, 450, 233–239. doi: 10.1016/j.tsf.2003.10.017
  • T. Tuken, B. Yazici and M. Erbil: ‘The corrosion behavior of polypyrrole coating synthesized in phenylphosphonic acid solution’, Appl. Surf. Sci., 2006, 252, 2311–2318. doi: 10.1016/j.apsusc.2005.04.004
  • B. Wessling: ‘Scientific and commercial breakthrough for organic metals’, Synthetic Met., 1997, 85, 1313–1318. doi: 10.1016/S0379-6779(97)80254-8
  • M. Bazzaoui, J. I. Martins, E. S. Bazzaoui, A. Albourine and L. Martins: ‘Corrosion protection of stainless steel plates in fuel cells environment by conducting polymers’, Mater. Corros., 2014, 65, 67–75. doi: 10.1002/maco.201206502
  • P. Herrasti and P. Ocon: ‘Polypyrrole layers for steel protection’, Appl. Surf. Sci., 2001, 172, 276–284. doi: 10.1016/S0169-4332(00)00866-7
  • J. A. Syed, H. Lu, S. Tang, and X. Meng: ‘Enhanced corrosion protective PANI-PAA/PEI multilayer composite coatings for 316SS by spin coating technique’, Appl. Surf. Sci., 2015, 325, 160–169. doi: 10.1016/j.apsusc.2014.11.021
  • A. R. Elkais, M. M. Gvozdenovic, B. Li, Y. Liu and Y. Han: ‘The influence of thin benzoate-doped polyaniline coatings on corrosion protection of mild steel in different environment’, Prog. Org. Coat., 2013, 76, 670–676. doi: 10.1016/j.porgcoat.2012.12.008
  • S. R. Takpire and S. A. Waghuley: ‘Synthesis of copolymer in PTi-co-PANi-Ti system for photovoltaic application’, Mater. Lett., 2015, 150, 9–11. doi: 10.1016/j.matlet.2015.03.002
  • Y. R. Ma, J. H. Kim, J. C. Shin, and P. S. Patil: ‘Electrochemical performance of potentio dynamically deposited polyaniline electrodes in ionic liquid’, J. Alloy Compd., 2015, 646, 1089–1095. doi: 10.1016/j.jallcom.2015.06.039
  • P. Piromruen, S. Kongparakul, and P. Prasassarakich: ‘Synthesis of polyaniline/montmorillonite nanocomposites with an enhanced anticorrosive performance’, Prog. Org. Coat., 2014, 77, 691–700. doi: 10.1016/j.porgcoat.2013.12.007
  • Y. Ding, J. Lang, Q. Shen, S. Li and J. Kan: ‘Y-Fe2O3/ Polyanilne-Mesa prepared by doping/dedoping method’, Mater. Res. Innov., 2014, 18, 471–476. doi: 10.1179/1433075X14Y.0000000211
  • M. M. Momeni and Z. Nazari: ‘Pt/PANI-MWCNT's nanocomposite coating prepared by electropolymerisation-electrodeposition for glycerol electro-oxidation’, Surf. Eng., 2015, 31, 472–479. doi: 10.1179/1743294414Y.0000000441
  • J. I. Martins, T. C. Reis, M. Bazzaoui, E. A. Bazzaoui and L. I. Martins: ‘Polypyrrole coatings as a treatment for zinc-coated steel surfaces against corrosion’, Corros. Sci., 2004, 46, 2361–2381. doi: 10.1016/j.corsci.2004.02.006
  • M. Kraljic, Z. Mandic and L. J. Duic: ‘Inhibition of steel corrosion by polyaniline coatings’, Corros. Sci., 2003, 45, 181–198. doi: 10.1016/S0010-938X(02)00083-5
  • H. A. Sorkhabi and M. Eshaghi: ‘Corrosion protection of mild steel by nano-colloidal polyaniline/nanodiamond composite coating in NaCl solution’, J. Coating Technol. Res., 2014, 11, 371–380. doi: 10.1007/s11998-013-9546-7
  • R. Arghavanian, B. Bostani and N. P. Ahmadi: ‘Characterization of coelectro - deposited Ni-Al composite coating’, Surf. Eng., 2015, 31, 189–193. doi: 10.1179/1743294414Y.0000000339
  • E. Anand and S. Natarajan: ‘Preparation and characterization of nanocrystalline cobalt-phosphorus coatings reinforced with carbon nanotubes’, Surf. Eng., 2014, 30, 716–721. doi: 10.1179/1743294414Y.0000000319
  • M. M. Gvozdenovic, B. Z. Jugovic, J. Stevanovic, B. N. Grgur, T. T. Trisovic and Z. Jugovic: ‘Electrochemical synthesis and corrosion behavior of polyaniline-benzoate coating on copper’, Synthetic Met., 2011, 161, 1313–1318. doi: 10.1016/j.synthmet.2011.04.029
  • J. Petitjean, S. Aeiyach, J. C. Lacroix and P. C. Lacaze: ‘Ultra-fast electropolymerization of pyrrole in aqueous media on oxidizable metals in a one-step process’, J. Electroana. Chem., 1999, 478, 92–100. doi: 10.1016/S0022-0728(99)00418-0
  • J. L. Camlet, J. C. Lacroix, S. Aeiyach, K. Chane-Ching and P. C. Lacaze: ‘Electro deposition of protective films on mild steel’, J. Electroanal. Chem., 1996, 416, 179–182. doi: 10.1016/S0022-0728(96)01012-1
  • O. Kazum and M. Bobby Kannan: ‘Galvanostatic polymerization of aniline on steel: improving the coating performance in chloride-containing environment’, Synthetic Met., 2013, 180, 54–58. doi: 10.1016/j.synthmet.2013.08.001
  • J. Tang, X. Jing, B. Wang and F. Wang: ‘Infrared spectra of soluble polyaniline’, Synthetic Met., 1988, 24, 231–238. doi: 10.1016/0379-6779(88)90261-5
  • K. G. Neoh, E. T. Kang and K. T. Tan: ‘Structural study of polyaniline films in reprontonation/deprototonation cycles’, J. Phys. Chem., 1991, 95, 10151–10156. doi: 10.1021/j100177a094
  • A. Ozyilmaz, A. Akdag, I. Karahan and G. Ozyilmaz: ‘The influence of polyaniline (PANI) coating on corrosion behaviour of zinc-cobalt coated carbon steel electrode’, Prog. Org. Coat., 2013, 76, 993–997. doi: 10.1016/j.porgcoat.2012.10.020
  • T. Ohsaka, Y. Ohnuki, N. Oyama, G. Katagiri and K. Kamisako: ‘Ir absorption spectroscopic identification of electroactive and electroactive polyaniline films prepared by the electrochemical polymerization of aniline’, J. Electroanal. Chem., 1984, 161, 399–405. doi: 10.1016/S0022-0728(84)80198-9
  • W. Y. Zheng, K. Levon, T. Taka, J. Laakso and J. E. Osterholm: ‘Doping-induced layered structure in N-alkylated polyaniline’, Polym. J., 1996, 28, 412–418. doi: 10.1295/polymj.28.412
  • P. Pawar, A. B. Gaikawad and P. P. Patil: ‘Electrochemical synthesis of corrosion protective coating on mild steel from aqueous salicylate medium’, Sci. Technol. Adv. Mat., 2006, 7, 732–744. doi: 10.1016/j.stam.2006.09.014
  • M. E. P. Souza, E. Ariza, M. Ballesster, I. V. P. Yoshida, L. A. Rocha and C. M. A. Freire: ‘Characterization of organic-inorganic hybrid coatings for corrosion protection of galvanized steel and electroplated ZnFe steel’, Mater. Res., 2006, 9, 59–64. doi: 10.1590/S1516-14392006000100012
  • J. Xu, Y. Zhang, D. Zhang, Y. Tang and H. Cang: ‘Electrosynthesis of PAni/PPy coatings doped by phosphotungstate on mild steel and their corrosion resistances’, Prog. Org. Coat., 2015, 88, 84–91. doi: 10.1016/j.porgcoat.2015.06.024
  • Y. Zhang, Y. Shao, T. Zhang, G. Meng and F. Wang: ‘High corrosion protection of a polyaniline/organophilic montmorillonite coating for magnesium alloys’, Prog. Org. Coat., 2013, 76, 804–811. doi: 10.1016/j.porgcoat.2013.01.008
  • P. Pawar, A. B. Gaikwad and P. P. Patil: ‘Corrosion protection aspects of electrochemically synthesized poly(o-anisidine-co-o-toluidine) coatings on copper’, Electochim. Acta, 2007, 52, 5958–5967. doi: 10.1016/j.electacta.2007.03.043

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.