Surface modification of Q550 HSLA steel with Co–Fe–Cr composite coatings manufactured by fibre laser cladding

References

• L. Lan, X. Kong, C. Qiu and D. Zhao: ‘Influence of microstructural aspects on impact toughness of multi-pass submerged arc welded HSLA steel joints’, Mater. Des., 2016, 90, 488–498.
   Web of Science ®Google Scholar
• H. Yang, J. L. Wang and Y. F. Hao: ‘Numerical simulation and test study on non-preheating welding technology of HSLA Q550 applied to hydraulic structures’, Adv. Mater. Res., 2012, 546–547, 110–114.
   Google Scholar
• G. Shi, F. Hu and Y. Shi: ‘Recent research advances of high strength steel structures and codification of design specification in China’, Int. J. Steel Struct., 2014, 14, 873–887. doi: 10.1007/s13296-014-1218-7
   Web of Science ®Google Scholar
• Y. Zhang, L. Yao, A. Guo, S. Zhao and G. Wang: ‘Development and application of TMCP steel plate in coal mining machinery’, Energy Mater., 2014, 287–298.
   Google Scholar
• K. M. Xue, P. Huang, P. Li, L. Chen and W. Liu: ‘The structure statics analysis and optimal design of hydraulic support’, Appl. Mech. Mater., 2012, 226–228, 1265–1268.
   Google Scholar
• S. Yongjiu: ‘Recent developments on high performance steel for buildings’, Adv. Struct. Eng., 2012, 15, 1617–1622. doi: 10.1260/1369-4332.15.9.1617
   Web of Science ®Google Scholar
• P. Farahmand and R. Kovacevic: ‘Corrosion and wear behavior of laser cladded Ni–WC coatings’, Surf. Coat. Technol., 2015, 276, 121–135. doi: 10.1016/j.surfcoat.2015.06.039
   Web of Science ®Google Scholar
• M. Dhanda, B. Haldar and P. Saha: ‘Development and characterization of hard and wear resistant MMC coating on Ti–6Al–4V substrate by laser cladding’, Procedia Mater. Sci., 2014, 6, 1226–1232. doi: 10.1016/j.mspro.2014.07.196
   Google Scholar
• N. M. Melendez, V. V. Narulkar, G. A. Fisher and A. G. McDonald: ‘Effect of reinforcing particles on the wear rate of low-pressure cold-sprayed WC-based MMC coatings’, Wear, 2013, 306, (1), 185–195. doi: 10.1016/j.wear.2013.08.006
   Web of Science ®Google Scholar
• K. Ushashri and M. Masanta: ‘Hard TiC coating on AISI304 steel by laser surface engineering using pulsed Nd:YAG laser’, Mater. Manuf. Process., 2015, 30, (6), 730–735. doi: 10.1080/10426914.2014.973593
   Web of Science ®Google Scholar
• D. Verdi, C. J. Múnez and P. Poza: ‘Cr3C2 incorporation into an Inconel 625 laser cladded coating: effects on matrix microstructure, mechanical properties and local scratch resistance’, Mater. Des., 2015, 67, 20–27. doi: 10.1016/j.matdes.2014.10.086
   Web of Science ®Google Scholar
• M. Zarezadeh Mehrizi, A. Saidi, R. Shoja-Razazvi and R. Beigi: ‘Evaluation of oxidation behavior of laser clad CoWSi–WSi2 coating on pure Ni substrate at different temperatures’, Ceram. Int., 2015, 41, (8), 9715–9721. doi: 10.1016/j.ceramint.2015.04.041
   Web of Science ®Google Scholar
• D. Bartkowski, A. Młynarczak, A. Piasecki, B. Dudziak, M. Gos´ciański and A. Bartkowska: ‘Microstructure, microhardness and corrosion resistance of Stellite-6 coatings reinforced with WC particles using laser cladding’, Opt. Laser Technol., 2015, 68, 191–201. doi: 10.1016/j.optlastec.2014.12.005
   Web of Science ®Google Scholar
• X. Chen, H.T. Wang, G. C. Ji, X. B. Bai and Z. X. Dong: ‘Deposition behavior of nanostructured WC–23Co particles in cold spraying process’, Mater. Manuf. Process., 2015, 1–7. doi: 10.1080/10426914.2015.1019096
   Web of Science ®Google Scholar
• A. Tyurin, A. Malikov and A. Orishich: ‘Microstructure of WC–Co hard alloy surface after laser treatment’, Surf. Eng., 2015, 31, (1), 74–77. doi: 10.1179/1743294414Y.0000000398
   Web of Science ®Google Scholar
• P. Vespa, P. T. Pinard, R. Gauvin and M. Brochu: ‘Analysis of WC/Ni-based coatings deposited by controlled short-circuit MIG welding’, J. Mater. Eng. Perform., 2012, 21, 865–876.
   Web of Science ®Google Scholar
• G. Huismann: ‘Direct control of the material transfer: the controlled short circuiting (CSC)-MIG process’, Proceedings of the Gas Metal Arc Welding for 21st Century Conference (American Welding Society), 2000, 6–8, 165–172.
   Google Scholar
• A. A. Sorour, R. R. Chromik and M. Brochu: ‘Tribology of a Fe–Cr–B-based alloy coating fabricated by a controlled short-circuit MIG welding process’, Metallogr. Microst. Anal., 2013, 2, (4), 223–233. doi: 10.1007/s13632-013-0081-9
   Google Scholar
• L. Thakur and N. Arora: ‘A comparative study on slurry and dry erosion behaviour of HVOF sprayed WC–CoCr coatings’, Wear, 2013, 303, (1), 405–411. doi: 10.1016/j.wear.2013.03.028
   Web of Science ®Google Scholar
• J. K. N. Murthy, D. S. Rao and B. Venkataraman: ‘Effect of grinding on the erosion behaviour of a WC–Co–Cr coating deposited by HVOF and detonation gun spray processes’, Wear, 2001, 249, (7), 592–600. doi: 10.1016/S0043-1648(01)00682-2
   Web of Science ®Google Scholar
• L. Thakur and N. Arora: ‘Sliding and abrasive wear behavior of WC–CoCr coatings with different carbide sizes’, J. Mater. Eng. Perform., 2013, 22, (2), 574–583. doi: 10.1007/s11665-012-0265-5
   Web of Science ®Google Scholar
• M. Afzal, M. Ajmal, A. N. Khan, A. Hussain and R. Akhter: ‘Surface modification of air plasma spraying WC–12% Co cermet coating by laser melting technique’, Opt. Laser Technol., 2014, 56, 202–206. doi: 10.1016/j.optlastec.2013.08.017
   Web of Science ®Google Scholar
• M. Afzal, A. N. Khan, T. B. Mahmud and M. Ajmal: ‘Effect of laser melting on plasma sprayed WC-12wt.% Co coatings’, Surf. Coat. Technol., 2015, 266, 22–30. doi: 10.1016/j.surfcoat.2015.02.004
   Web of Science ®Google Scholar
• F. Weng, C. Chen and H. Yu: ‘Research status of laser cladding on titanium and its alloys: a review’, Mater. Des., 2014, 58, 412–425. doi: 10.1016/j.matdes.2014.01.077
   Web of Science ®Google Scholar
• S. Zafar and A. K. Sharma: ‘Abrasive and erosive wear behaviour of nanometric WC–12Co microwave clads’, Wear, 2016, 346, 29–45. doi: 10.1016/j.wear.2015.11.003
   Web of Science ®Google Scholar
• F. Weng, H. Yu, C. Chen and J. Dai: ‘Microstructures and wear properties of laser cladding Co-based composite coatings on Ti–6Al–4V’, Mater. Des., 2015, 80, 174–181. doi: 10.1016/j.matdes.2015.05.005
   Web of Science ®Google Scholar
• M. Qunshuang, L. Yajiang, W. Juan and L. Kun: ‘Microstructure evolution and growth control of ceramic particles in wide-band laser clad Ni60/WC composite coatings’, Mater. Des., 2016, 92, 897–905.
   Web of Science ®Google Scholar
• J. Qinglei, L. Yajiang, W. Juan and Z. Lei: ‘Characterization on strength and toughness of welded joint for Q550 steel’, Bull. Mater. Sci., 2011, 34, 161–167. doi: 10.1007/s12034-011-0039-y
   Web of Science ®Google Scholar
• L. Nianfu: ‘Analysis on mechanical property and microstructure of low carbon bainite steel Q550 for engineering machinery use’, Iron Steel Vanadium Titanium, 2012, 2, 017.
   Google Scholar
• L. Zhang, Y. Li, J. Wang and Q. Jiang: ‘Effect of acicular ferrite on cracking sensibility in the weld metal of Q690+ Q550 high strength steels’, ISIJ Int., 2011, 51, (7), 1132–1136. doi: 10.2355/isijinternational.51.1132
   Web of Science ®Google Scholar
• G. Xu, M. Kutsuna, Z. Liu and L. Sun: ‘Characteristic behaviours of clad layer by a multi-layer laser cladding with powder mixture of Stellite-6 and tungsten carbide’, Surf. Coat. Technol., 2006, 201, (6), 3385–3392. doi: 10.1016/j.surfcoat.2006.07.210
   Web of Science ®Google Scholar
• R. A. Jeshvaghani, M. Shamanian and M. Jaberzadeh: ‘Enhancement of wear resistance of ductile iron surface alloyed by satellite 6’, Mater. Des., 2011, 32, (4), 2028–2033. doi: 10.1016/j.matdes.2010.11.060
   Web of Science ®Google Scholar
• M. Qunshuang, W. Juan and L. Kun: ‘Homogenization of carbides in Ni60/WC composite coatings made by fiber laser remelting’, Mater. Manuf. Process., 2015, 30, (12), 1417–1424. doi: 10.1080/10426914.2015.1026353
   Web of Science ®Google Scholar
• I. Smurov, M. Doubenskaia and A. Zaitsev: ‘Comprehensive analysis of laser cladding by means of optical diagnostics and numerical simulation’, Surf. Coat. Technol., 2013, 220, 112–121. doi: 10.1016/j.surfcoat.2012.10.053
   Web of Science ®Google Scholar
• T. E. Abioye, D. G. McCartney and A. T. Clare: ‘Laser cladding of Inconel 625 wire for corrosion protection’, J. Mater. Process. Technol., 2015, 217, 232–240. doi: 10.1016/j.jmatprotec.2014.10.024
   Web of Science ®Google Scholar
• S. Zhou and X. Zeng: ‘Growth characteristics and mechanism of carbides precipitated in WC–Fe composite coatings by laser induction hybrid rapid cladding’, J. Alloy Compd., 2010, 505, (2), 685–691. doi: 10.1016/j.jallcom.2010.06.115
   Web of Science ®Google Scholar
• J. Yang, X. Miao, X. Wang and F. Yang: ‘Influence of Mn additions on the microstructure and magnetic properties of FeNiCr/60% WC composite coating produced by laser cladding’, Int. J. Refract. Met. Hard Mater., 2014, 46, 58–64. doi: 10.1016/j.ijrmhm.2014.05.010
   Web of Science ®Google Scholar
• T. E. Abioye, A. T. Clare and D. G. McCartney: ‘Concurrent Inconel 625 wire and WC powder laser cladding: process stability and microstructural characterisation’, Surf. Eng., 2013, 29, (9), 647–653. doi: 10.1179/1743294412Y.0000000073
   Web of Science ®Google Scholar
• A. F. Guillermet: ‘Thermodynamic properties of the Co–W–C system’, Metall. Ttans. A, 1989, 20, (5), 935–956. doi: 10.1007/BF02651660
   Web of Science ®Google Scholar
• S. Zafar and A. K. Sharma: ‘Development and characterisations of WC–12Co microwave clad’, Mater. Charact., 2014, 96, 241–248. doi: 10.1016/j.matchar.2014.08.015
   Web of Science ®Google Scholar