References
- K. Farokhzadeh and A. Edrisy: ‘Transition between mild and severe wear in titanium alloys’, Tribol. Int., 2016, 94, 98–111. doi: 10.1016/j.triboint.2015.08.020
- H. B. Li, Z. D. Cui, Z. Y. Li, S. L. Zhu and X. J. Yang: ‘Surface modification by gas nitriding for improving cavitation erosion resistance of CP-Ti’, Appl. Surf. Sci., 2014, 298, 164–170. doi: 10.1016/j.apsusc.2014.01.152
- G. J. Li, J. Li and X. Luo: ‘Effects of post-heat treatment on microstructure and properties of laser cladded composite coatings on titanium alloy substrate’, Opt. Laser. Technol., 2015, 65, 66–75. doi:10.1016/j.optlastec.2014.07.003
- L. Qin, C. Liu, K. Yang and B. Tang: ‘Characteristics and wear performance of borided Ti6Al4V alloy prepared by double glow plasma surface alloying’, Surf. Coat. Technol., 2013, 225, 92–96. doi: 10.1016/j.surfcoat.2013.02.053
- E. Marin, R. Offoiach, M. Regis, S. Fusi, A. Lanzutti and L. Fedrizzi: ‘Diffusive thermal treatments combined with PVD coatings for tribological protection of titanium alloys’, Mater. Charact., 2016, 89, 314–322.
- S. Wang, Z. Liao, Y. Liu and W. Liu: ‘Different tribological behaviors of titanium alloys modified by thermal oxidation and spraying diamond like carbon’, Surf. Coat. Technol., 2014, 252, 64–73. doi: 10.1016/j.surfcoat.2014.05.008
- M. Shafiee Afarani, S. Khorshahian and M. Sharifitabar: ‘Boride coatings obtained by pack cementation deposited on powder metallurgy and wrought Ti and Ti-6Al-4V’, Surf. Coat. Technol., 2013, 219, 94–100. doi: 10.1016/j.surfcoat.2013.01.010
- X. M. Li and Y. Han: ‘Mechanical properties of Ti(C0.7N0.3) film produced by plasma electrolytic carbonitriding of Ti6Al4V alloy’, Appl. Surf. Sci., 2008, 254, 6350–6357. doi: 10.1016/j.apsusc.2008.03.172
- G. Kartal, S. Timur, M. Urgen and A. Erdemir: ‘Electrochemical boriding of titanium for improved mechanical properties’, Surf. Coat. Technol., 2010, 204, 3935–3939. doi: 10.1016/j.surfcoat.2010.05.021
- P. Kaestner, J. Olfe and K.-T. Rie: ‘Plasma-assisted boriding of pure titanium and TiAl6V4’, Surf. Coat. Technol., 2001, 142–144, 248–252. doi: 10.1016/S0257-8972(01)01244-0
- M. Kulka, N. Makuch, P. Dziarski, A. Piasecki and A. Miklaszewski: ‘Microstructure and properties of laser-borided composite layers formed on commercially pure titanium’, Opt. Laser. Technol., 2014, 56, 409–424. doi: 10.1016/j.optlastec.2013.09.022
- N. Makuch, M. Kulka, P. Dziarski and D. Przestacki: ‘Laser surface alloying of commercially pure titanium with boron and carbon’, Opt. Laser. Technol., 2014, 57, 64–81. doi: 10.1016/j.optlaseng.2014.01.019
- S. A. Tsipas, M. R. Vázquez-Alcázar, E. M. Ruiz Navas and E. Gordo: ‘Boride coatings obtained by pack cementation deposited on powder metallurgy and wrought Ti and Ti-6Al-4V’, Surf. Coat. Technol., 2010, 205, 2340–2347. doi: 10.1016/j.surfcoat.2010.09.026
- L. G. Yu, K. A. Khor and G. Sundararajan: ‘Boride layer growth kinetics during boriding of molybdenum by the Spark Plasma Sintering (SPS) technology’, Surf. Coat. Technol., 2006, 201, 2849–2853. doi:10.1016/j.surfcoat.2006.05.042
- R. L. Liu, M. F. Yan, Y. Q. Wu and C. Z. Zhao: ‘Microstructure and properties of 17-4PH steel plasma nitrocarburized with a carrier gas containing rare earth elements’, Mater. Charact., 2010, 61, 19–24. doi: 10.1016/j.matchar.2009.09.017
- D. Cleugh, C. Blawert, J. Steinbach, H. Ferkel, B. L. Mordike and T. Bell: ‘Effects of rare earth additions on nitriding of EN40B by plasma immersion ion implantation’, Surf. Coat. Technol., 2001, 142–144, 392–396. doi: 10.1016/S0257-8972(01)01245-2
- X-d. Yuan, B. Xu and Y-c. Cai: ‘A novel RE-chrome-boronizing technology assisted by fast multiple rotation rolling treatment at low temperature’, Appl. Surf. Sci., 2015, 357, 2285–2289. doi: 10.1016/j.apsusc.2015.09.228
- X. H. Yi, Z. G. Fan, J. L. Zhang, F. H. Li and Z. P. Xi: ‘Effects of rare earth on boronizing TC4 titanium alloy’, J. Rare. Mat., 2010, 28, 607–611.
- Y. S. Zhu, W. Z. Lu, D. W. Zuo, Y. L. Sun, H. Wang and J. Xu: ‘Effects of rare earth additions during surface boriding on microstructure and properties of titanium alloy TC21’, Mater. Sci. Tech-Lond., 2014, 30, 1765–1769. doi: 10.1179/1743284713Y.0000000455
- Y. S. Zhu, W. Z. Lu, D. W. Zuo, W. Feng and Y. F. He: ‘Microstructure and tribological properties of REs borided TC21 alloy’, Sur. Eng., 2014, 30, 612–618. doi: 10.1179/1743294414Y.0000000292
- Z. Yansong, L. Wenzhuang, Z. Dunwen, S. Yuli, W. Han and X. Jun: ‘Characteristics of RE-B surface diffusion process on the new damage tolerance TC21 alloy’, Rare. Metal. Mat. Eng., 2014, 43, 692–697.
- V. Ataibis and S. Taktak: ‘Characteristics and growth kinetics of plasma paste borided Cp-Ti and Ti6Al4V alloy’, Surf. Coat. Technol., 2015, 279, 65–71. doi:10.1016/j.surfcoat.2015.08.023
- N. M. Tikekar, K. S. Ravi Chandran and A. Sanders: ‘Nature of growth of dual titanium boride layers with nanostructured titanium boride whiskers on the surface of titanium’, Scripta Mater., 2007, 57, 273–276. doi: 10.1016/j.scriptamat.2007.03.050
- B. Sarma and K. S. Ravi Chandran: ‘Accelerated kinetics of surface hardening by diffusion near phase transition temperature: mechanism of growth of boride layers on titanium’, Acta Mater., 2011, 59, 4216–4228. doi: 10.1016/j.actamat.2011.03.046
- X. L. Wang, Y. Q. Zhao, Y. Q. Wang, H. L. Hou and W. D. Zeng: ‘Kinetics of hydrogen absorption/desorption in TC21 alloy’, J. Alloys Compd., 2010, 490, 562–567. doi: 10.1016/j.jallcom.2009.10.081
- J. L. Murray, P. K. Liao and K. E. Spear: ‘The B-Ti(Boron-Titanium) system’, J. Phase. Equilib., 1986, 7, 550–555.
- F. Li, X. Yi, J. Zhang, Z. Fan, D. Gong and Z. Xi: ‘Growth kinetics of titanium boride layers on the surface of Ti6Al4V’, Acta. Metall. Sin., 2010, 23, 293–300.
- Y. Xiao hong, F. Zhanguo, Z. Jinglei and L. Fenghua: ‘Pack boronizing of TC4 titanium alloy and kinetics of boronizing process’, J. Northeast. Univ., 2010, 31, 88–95.
- B. Sarma, N. M. Tikekar and K. S. Ravi Chandran: ‘Kinetics of growth of superhard boride layers during solid state diffusion of boron into titanium’, Ceram. Int., 2012, 38, 6795–6805. doi: 10.1016/j.ceramint.2012.05.077