Corrosion resistance of tin coatings deposited by cold spraying

References

• G. Subramanian, S. Palraj and S. Palanichamy: ‘Galvanic corrosion behaviour of aluminium 3004 and copper in tropical marine atmosphere’, J. Mar. Sci. Appl., 2014, 13, 230–236. doi: 10.1007/s11804-014-1244-z
   Google Scholar
• L. Pawłowski: ‘The science and engineering of thermal spray coatings’, 2nd edn, 507–517; 2008, New York, John Wiley & Sons Ltd.
   Google Scholar
• T. Maghet, T. Wilhelm, M. Sallai, J. Mährlein, S. Friedrich and R. Regenspurger: ‘Thermally sprayed coatings as corrosion protection for steel structures – influence of manufacturing processes on the coatings quality’, Proc. Int. ‘Therm. Spray Conf.’, Long Beach, California, USA, May 2015, Long Beach Convention & Entertainment Center, paper 176.
   Google Scholar
• M. Oksa, J. Metsäjoki and J. Karki: ‘Thermal spray coatings for high-temperature corrosion protection in biomass co-fired boilers’, J. Therm. Spray Technol., 2015, 24, 194–205. doi: 10.1007/s11666-014-0192-0
   Web of Science ®Google Scholar
• P. R. Roberge: ‘Handbook of corrosion engineering’, 1st edn, 336–344, 794–803; 1999, New York, McGraw-Hill.
   Google Scholar
• V. K. Champagne: ‘The cold spray materials deposition process – Fundamentals and applications’, 1st edn, 127–142, 348; 2007, Cambridge, Woodhead Publishing Limited.
   Google Scholar
• A. Moridi, S. M. Hassani-Gangaraj, M. Guagliano and M. Dao: ‘Cold spray coating: review of material systems and future perspectives’, Surf. Eng., 2014, 30, 369–395. doi: 10.1179/1743294414Y.0000000270
   Web of Science ®Google Scholar
• P. Cavaliere and A. Silvello: ‘Fatigue behaviour of cold sprayed metals and alloys: critical review’, Surf. Eng., 2016, DOI 10.1179/1743294415Y.0000000100.
   Web of Science ®Google Scholar
• A. Manap, O. Nooririnah, H. Misran, T. Okabe and K. Ogawa: ‘Experimental and SPH study of cold spray impact between similar and dissimilar metals’, Surf. Eng., 2014, 30, 335–341. doi: 10.1179/1743294413Y.0000000237
   Web of Science ®Google Scholar
• P. Jakupi, P. G. Keech, I. Barker, S. Ramamurthy, R. L. Jacklin, D. W. Shoesmith and D. E. Moser: ‘Characterization of commercially cold sprayed copper coatings and determination of the effects of impacting copper powder velocities’, J. Nucl. Mater., 2015, 466, 1–11. doi: 10.1016/j.jnucmat.2015.07.001
   Web of Science ®Google Scholar
• M. Jeandin, G. Rolland, L. L. Descurninges and M. H. Berger: ‘Which powders for cold spray?’, Surf. Eng., 2014, 30, 291–298. doi: 10.1179/1743294414Y.0000000253
   Web of Science ®Google Scholar
• S. Yin, H. L. Liao and X. F. Wang: ‘Euler based finite element analysis on high velocity impact behaviour in cold spraying’, Surf. Eng., 2014, 30, 309–315. doi: 10.1179/1743294413Y.0000000240
   Web of Science ®Google Scholar
• W. Y. Li, D. D. Zhang, C. J. Huang, S. Yin, M. Yu, F. F. Wang and H. L. Liao: ‘Modelling of impact behaviour of cold spray particles: review’, Surf. Eng., 2014, 30, 299–308. doi: 10.1179/1743294414Y.0000000268
   Web of Science ®Google Scholar
• S. Yin, X. Suo, H. Liao, Z. Guo and X. Wang: ‘Significant influence of carrier gas temperature during the cold spray process’, Surf. Eng., 2014, 30, 443–450. doi: 10.1179/1743294414Y.0000000276
   Web of Science ®Google Scholar
• J. F. Li, P. A. Agyakwa, C. M. Johnson, D. Zhang, T. Hussain and D. G. McCartney: ‘Characterization and solderability of cold sprayed Sn–Cu coatings on Al and Cu substrates’, Surf. Coat. Technol., 2010, 204, 1395–1404. doi: 10.1016/j.surfcoat.2009.09.025
   Web of Science ®Google Scholar
• J. G. Legoux, E. Irissou and C. Moreau: ‘Effect of substrate temperature on the formation mechanism of cold-sprayed aluminum, zinc and tin coatings’, J. Therm. Spray Technol., 2007, 16, 619–626. doi: 10.1007/s11666-007-9091-y
   Web of Science ®Google Scholar
• V. K. Champagne and D. J. Helfritch: ‘Mainstreaming cold spray – push for applications’, Surf. Eng., 2014, 30, 396–403. doi: 10.1179/1743294414Y.0000000277
   Web of Science ®Google Scholar
• Y. Wang, B. Normand, N. Marya, M. Yu and H. Liao: ‘Microstructure and corrosion behavior of cold sprayed SiCp/Al44 5056 composite coatings’, Surf. Coat. Technol., 2014, 251, 264–275. doi: 10.1016/j.surfcoat.2014.04.036
   Web of Science ®Google Scholar
• O. Meydanoglu, B. Jodoin and E. S. Kayali: ‘Microstructure, mechanical properties and corrosion performance of 7075 Al matrix ceramic particle reinforced composite coatings produced by the cold gas dynamic spraying process’, Surf. Coat. Technol., 2013, 235, 108–116. doi: 10.1016/j.surfcoat.2013.07.020
   Web of Science ®Google Scholar
• K. Balani, T. Laha, A. Agarwal, J. Karthikeyan and N. Munroe: ‘Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating’, Surf. Coat. Technol., 2005, 195, 272–279. doi: 10.1016/j.surfcoat.2004.06.028
   Web of Science ®Google Scholar
• S. M. Hassani-Gangaraj, A. Moridi and M. Guagliano: ‘Critical review of corrosion protection by cold spray coatings’, Surf. Eng., 2015, 31, 803–815. doi: 10.1179/1743294415Y.0000000018
   Web of Science ®Google Scholar
• H. Gamsjager, T. Gajda, J. Sangster, S. K. Saxena and W. Voigt: ‘Chemical thermodynamics of tin’, 1st edn, vol. 12, 117–133, 148–150; 2012, Paris, OECD Publishing.
   Google Scholar
• B. X. Huang, P. Tornatore and Y.-S. Li: ‘IR and Raman spectroelectrochemical studies of corrosion films on tin’, Electrochem. Acta, 2001, 46, 671–679. doi: 10.1016/S0013-4686(00)00660-5
   Web of Science ®Google Scholar
• P. Eckold, R. Niewa and W. Hügel: ‘Texture of electrodeposited tin layers and its influence on their corrosion behavior’, Microelectron. Reliab., 2014, 54, 2578–2585. doi: 10.1016/j.microrel.2014.06.006
   Web of Science ®Google Scholar
• L. Y. Xu, Z. K. Zhang, H. Y. Jing, J. Wei and Y. D. Han: ‘Effect of graphene nanosheets on the corrosion behavior of Sn–Ag–Cu solders’, J. Mater. Sci.: Mater. Electron., 2015, 26, 5625–5634.
   Web of Science ®Google Scholar
• J. J. Matzko, H. T. Evans, M. E. Mrose and P. Aruscavage: ‘Abhurite, a new tin hydroxychloride mineral, and a comparative study with a synthetic basic tin chloride’, Can. Mineral., 1985, 23, 233–240.
   Web of Science ®Google Scholar
• Standard: ‘Corrosion of metals and alloys – Corrosion in artificial atmosphere – Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution’, PN-EN ISO 16701, Polish Standards Association, Poland, 2010.
   Google Scholar
• Standard: Metallic and other non-organic coatings – Sulphur dioxide test with general condensation of moisture, PN-EN ISO 6988, Polish Standards Association, Poland, 2000.
   Google Scholar
• Standard: ‘Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements’, PN EN ISO 17475:2008U, Polish Standards Association, Poland, 2010.
   Google Scholar
• S. Jouen, B. Hannoyer and O. Piana: ‘Non-destructive surface analysis applied to atmospheric corrosion of tin’, Surf. Interface Anal., 2002, 34, 192–196. doi: 10.1002/sia.1281
   Web of Science ®Google Scholar
• W. Li, K. Yang, D. Zhang and X. Zhou: ‘Residual stress analysis of cold-sprayed copper coatings by numerical simulation’, J. Therm. Spray Technol., 2016, 25, 131–142. doi: 10.1007/s11666-015-0308-1
   Web of Science ®Google Scholar
• W. Luo, U. Selvadurai and W. Tillmann: ‘Effect of residual stress on the wear resistance of thermal spray coatings’, J. Therm. Spray Technol., 2016, 25, 321–330. doi: 10.1007/s11666-015-0309-0
   Web of Science ®Google Scholar
• S. B. S. Kalsi, T. S. Sidhu and H. Singh: ‘Performance of cold spray coating in industrial medical waste incinerator’, Surf. Eng., 2014, 30, 352–360. doi: 10.1179/1743294414Y.0000000259
   Web of Science ®Google Scholar
• P. Spathis: ‘Influence of anodic coatings on stress corrosion behaviour of 7017 aluminium alloy’, AntiCorros. Methods Mater., 2014, 61, 27–31. doi: 10.1108/ACMM-12-2012-1226
   Web of Science ®Google Scholar
• F. Rosalbino, E. Angelini, G. Zanicchi, R. Carlini and R. Marazza: ‘Electrochemical corrosion study of Sn–3Ag–3Cu solder alloy in NaCl solution’, Electrochem. Acta, 2009, 54, 7231–7235. doi: 10.1016/j.electacta.2009.07.030
   Web of Science ®Google Scholar
• H. Shih: ‘Corrosion resistance’, 1st edn, 107–128; 2012, Shanghai, InTech.
   Google Scholar
• D. Li, P. P. Conway and Ch. Liu: ‘Corrosion characterization of tin–lead and lead free solders in 3.5 wt.% NaCl solution’, Corros. Sci., 2008, 50, 995–1004. doi: 10.1016/j.corsci.2007.11.025
   Web of Science ®Google Scholar
• L. C. Tsao and C. W. Chen: ‘Corrosion characterization of Cu–Sn intermetallics in 3.5 wt.% NaCl solution’, Corros. Sci., 2012, 63, 393–398. doi: 10.1016/j.corsci.2012.06.015
   Web of Science ®Google Scholar
• W. R. Osório, E. S. Freitas, J. E. Spinelli and A. Garcia: ‘Electrochemical behavior of a lead-free Sn–Cu solder alloy in NaCl solution’, Corros. Sci., 2014, 80, 71–81. doi: 10.1016/j.corsci.2013.11.010
   Web of Science ®Google Scholar
• H. G. Von Schnering, R. Nesper and H. Pelshenke: ‘Sn21Cl16(OH)14O6 das sogenannte basische Zinn(II)-chlorid’, Zeits. Naturforsch., 1981, 36b, 1551–1560.
   Google Scholar
• R. Edwards, R. D. Gillard and P. A. Willlams: ‘The stabilities of secondary tin minerals: Abhurite and its relationships to Sn(II) and Sn(IV) oxides and oxyhydroxides’, Miner. Mag., 1992, 56, 221–226. doi: 10.1180/minmag.1992.056.383.08
   Web of Science ®Google Scholar