References
- Kandlikar SG. Handbook of phase change: boiling and condensation. Ann Arbor, MI: Taylor & Francis; 1999.
- Ahn HS, Kim MH. A review on critical heat flux enhancement with nanofluids and surface modification. J Heat Trans. 2012;134:024001. doi: 10.1115/1.4005065
- Jakob M, Fritz W. Versuche über den Verdampfungsvorgang. Forsch Ingenieurwes. 1931;2:435–447. doi: 10.1007/BF02578808
- Gaertner R. Effect of heater surface chemistry on the level of burnout heat flux in pool boiling. Technical Information Series; 1963.
- Liaw S-P, Dhir V. Effect of surface wettability on transition boiling heat transfer from a vertical surface. Proceedings of the 8th international heat transfer conference; 1986, 2031–2036.
- Liter SG, Kaviany M. Pool-boiling CHF enhancement by modulated porous-layer coating: theory and experiment. Int J Heat Mass Trans. 2001;44:4287–4311. doi: 10.1016/S0017-9310(01)00084-9
- Ahn HS, Sinha N, Zhang M, et al. Pool boiling experiments on multiwalled carbon nanotube (MWCNT) forests. J Heat Trans. 2006;128:1335–1342. doi: 10.1115/1.2349511
- Li C, Wang Z, Wang PI, et al. Nanostructured copper interfaces for enhanced boiling. Small. 2008;4:1084–1088. doi: 10.1002/smll.200700991
- Vemuri S, Kim KJ. Pool boiling of saturated FC-72 on nano-porous surface. Int Commun Heat Mass Trans. 2005;32:27–31, 1. doi: 10.1016/j.icheatmasstransfer.2004.03.020
- Hendricks TJ, Krishnan S, Choi C, et al. Enhancement of pool-boiling heat transfer using nanostructured surfaces on aluminum and copper. Int J Heat Mass Trans. 2010;53:3357–3365. doi: 10.1016/j.ijheatmasstransfer.2010.02.025
- Lee CY, Bhuiya MMH, Kim KJ. Pool boiling heat transfer with nano-porous surface. Int J Heat Mass Trans. 2010;53:4274–4279. doi: 10.1016/j.ijheatmasstransfer.2010.05.054
- Zhang BJ, Kim KJ, Yoon H. Enhanced heat transfer performance of alumina sponge-like nano-porous structures through surface wettability control in nucleate pool boiling. Int J Heat Mass Trans. 2012;55:7487–7498. doi: 10.1016/j.ijheatmasstransfer.2012.07.053
- Saeidi D, Alemrajabi AA. Experimental investigation of pool boiling heat transfer and critical heat flux of nanostructured surfaces. Int J Heat Mass Trans. 2013;60:440–449. doi: 10.1016/j.ijheatmasstransfer.2013.01.016
- Kim DE, Yu DI, Jerng DW, et al. Review of boiling heat transfer enhancement on micro/nanostructured surfaces. Exp Therm Fluid Sci. 2015;66:173–196. doi: 10.1016/j.expthermflusci.2015.03.023
- Lee W, Park S-J. Porous anodic aluminum oxide: anodization and templated synthesis of functional nanostructures. Chem Rev. 2014;114:7487–7556. doi: 10.1021/cr500002z
- Alkire RC, Gogotsi Y, Simon P, et al. Nanostructured materials in electrochemistry. Weinheim: John Wiley & Sons; 2008.
- O'sullivan J, Wood G. The morphology and mechanism of formation of porous anodic films on aluminium. Proceedings of the Royal Society of London A: mathematical, physical and engineering sciences; 1970, 511–543.
- Jani AMM, Losic D, Voelcker NH. Nanoporous anodic aluminium oxide: advances in surface engineering and emerging applications. Prog Mater Sci. 2013;58:636–704. doi: 10.1016/j.pmatsci.2013.01.002
- Han X, Shen W. Improved two-step anodization technique for ordered porous anodic aluminum membranes. J Electroanal Chem. 2011;655:56–64. doi: 10.1016/j.jelechem.2011.02.008
- Li AP, Müller F, Birner A, et al. Fabrication and microstructuring of hexagonally ordered two-dimensional nanopore arrays in anodic alumina. Adv Mater. 1999;11:483–487. doi: 10.1002/(SICI)1521-4095(199904)11:6<483::AID-ADMA483>3.0.CO;2-I
- Masuda H, Yamada H, Satoh M, et al. Highly ordered nanochannel-array architecture in anodic alumina. Appl Phys Lett. 1997;71:2770–2772. doi: 10.1063/1.120128
- Hwang SK, Jeong SH, Hwang HY, et al. Fabrication of highly ordered pore array in anodic aluminum oxide. Korean J Chem Eng. 2002;19:467–473. doi: 10.1007/BF02697158
- Zhao X, Wei G, Meng X, et al. High performance alumina films prepared by direct current plus pulse anodisation. Surf Eng. 2014;30:455–459. doi: 10.1179/1743294414Y.0000000258
- Kline SJ, McClintock F. Describing uncertainties in single-sample experiments. Mech Eng. 1953;75:3–8.
- Kubiak K, Wilson M, Mathia T, et al. Wettability versus roughness of engineering surfaces. Wear. 2011;271:523–528. doi: 10.1016/j.wear.2010.03.029
- Guo C, Wang XW, Yuan Z-H. Pore diameter-dependence wettability of porous anodized aluminum oxide membranes. J Porous Mater. 2013;20:673–677. doi: 10.1007/s10934-012-9641-7
- Norek M, Krasiński A. Controlling of water wettability by structural and chemical modification of porous anodic alumina (PAA): towards super-hydrophobic surfaces. Surf Coat Technol. 2015;276:464–470. doi: 10.1016/j.surfcoat.2015.06.028
- Washburn EW. The dynamics of capillary flow. Phys Rev. 1921;17:273–283. doi: 10.1103/PhysRev.17.273
- Tang Y, Tang B, Qing J, et al. Nanoporous metallic surface: facile fabrication and enhancement of boiling heat transfer. Appl Surf Sci. 2012;258:8747–8751. doi: 10.1016/j.apsusc.2012.05.085
- Zaraska L, Sulka GD, Jaskuła M. Anodic alumina membranes with defined pore diameters and thicknesses obtained by adjusting the anodizing duration and pore opening/widening time. J Solid State Electrochem. 2011;15:2427–2436. doi: 10.1007/s10008-011-1471-z
- Belwalkar A, Grasing E, Van Geertruyden W, et al. Effect of processing parameters on pore structure and thickness of anodic aluminum oxide (AAO) tubular membranes. J Membr Sci. 2008;319:192–198. doi: 10.1016/j.memsci.2008.03.044
- Christoulaki A, Dellis S, Spiliopoulos N, et al. Controlling the thickness of electrochemically produced porous alumina membranes: the role of the current density during the anodization. J Appl Electrochem. 2014;44:701–707. doi: 10.1007/s10800-014-0680-4