References
- Molinari A, Straffelini G, Tesi B, et al. Dry sliding wear mechanisms of the Ti6Al4V alloy. Wear. 1997;208(1–2):105–112. doi: 10.1016/S0043-1648(96)07454-6
- Liu X, Chu PK, Ding C. Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Mater Sci Eng R Rep. 2004;47(3–4):49–121. doi: 10.1016/j.mser.2004.11.001
- Ceschini L, Lanzoni E, Martini C, et al. Comparison of dry sliding friction and wear of Ti6Al4V alloy treated by plasma electrolytic oxidation and PVD coating. Wear. 2008;264(1–2):86–95. doi: 10.1016/j.wear.2007.01.045
- Li XJ, Cheng GA, Xue WB, et al. Wear and corrosion resistant coatings formed by microarc oxidation on TiAl alloy. Mater Chem Phys. 2008;107(1):148–152. doi: 10.1016/j.matchemphys.2007.06.067
- Lin XZ, Zhu MH, Zheng JF, et al. Fretting wear of micro-arc oxidation coating prepared on Ti6Al4V alloy. Trans Nonferr Metal Soc China. 2010;20(4):537–546. doi: 10.1016/S1003-6326(09)60175-8
- Martini C, Ceschini L, Tarterini F, et al.. PEO layers obtained from mixed aluminate–phosphate baths on Ti–6Al–4V: dry sliding behaviour and influence of a PTFE topcoat. Wear. 2010;269(11–12):747–756. doi: 10.1016/j.wear.2010.07.011
- Wang YM, Jiang BL, Guo LX, et al. Tribological behavior of microarc oxidation coatings formed on titanium alloys against steel in dry and solid lubrication sliding. Appl Surf Sci. 2006;252(8):2989–2998. doi: 10.1016/j.apsusc.2005.05.009
- Wheeler JM, Collier CA, Paillard JM, et al. Evaluation of micromechanical behaviour of plasma electrolytic oxidation (PEO) coatings on Ti–6Al–4V. Surf Coat Technol. 2010;204(21–22):3399–3409. doi: 10.1016/j.surfcoat.2010.04.006
- Yerokhin AL, Nie X, Leyland A, et al. Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti–6Al–4V alloy. Surf Coat Technol. 2000;130(2–3):195–206. doi: 10.1016/S0257-8972(00)00719-2
- Yerokhin AL, Leyland A, Matthews A. Kinetic aspects of aluminium titanate layer formation on titanium alloys by plasma electrolytic oxidation. Appl Surf Sci. 2002;200(1–4):172–184. doi: 10.1016/S0169-4332(02)00848-6
- Xue W, deng Z, Ma H, et al. Microstructure and phase composition of microarc oxidation coatings formed on Ti–6Al–4V alloy in aluminate solution. Surf Eng. 2001;17(4):323–326. doi: 10.1179/026708401101517953
- Qin YK, Xiong DS, Li JL, et al. Compositions and tribological properties of PEO coatings on Ti6Al4V alloy. Surf Eng. 2016: 1–7. doi: 10.1179/1743294414Y.0000000412
- Khanmohammadi H, Allahkaram SR, Towhidi N, et al. Preparation of PEO coating on Ti6Al4V in different electrolytes and evaluation of its properties. Surf Eng. 2016;32(6):448–456. doi: 10.1179/1743294415Y.0000000083
- Tekin KC, Malayoglu U, Shrestha S. Tribological behaviour of plasma electrolytic oxide coatings on Ti6Al4V and cp-Ti alloys. Surf Eng. 2016;32(6):435–442. doi: 10.1179/1743294415Y.0000000075
- Aliasghari S, Němcová A, Skeldon P, et al. Influence of coating morphology on adhesive bonding of titanium pre-treated by plasma electrolytic oxidation. Surf Coat Technol. 2016;289:101–109. doi: 10.1016/j.surfcoat.2016.01.042
- Qin Y, Xiong D, Li J. Tribological properties of laser surface textured and plasma electrolytic oxidation duplex-treated Ti6Al4V alloy deposited with MoS2 film. Surf Coat Technol. 2015;269:266–272. doi: 10.1016/j.surfcoat.2014.12.003
- Aliasghari S, Němcová A, Čížek J, et al. Effects of reagent purity on plasma electrolytic oxidation of titanium in an aluminate–phosphate electrolyte. Trans IMF. 2016;94(1):32–42. doi: 10.1080/00202967.2015.1121692