Electrodeposition of multilayer Ni–W and Ni–W–alumina nanocomposite coatings

References

• Hansson, C. (2011). The impact of corrosion on society. Metall Mater Trans A. 42, (10), 2952–2962. doi: 10.1007/s11661-011-0703-2
   Web of Science ®Google Scholar
• Rickerby, D. S., & Matthews, A. (1991). Advanced surface coatings: a handbook of surface engineering. Blackie: Chapman and Hall.
   Google Scholar
• Allahyarzadeh, M., Aliofkhazraei, M., & Sabour Rouhaghdam, A. (2016). Electrodeposition on superalloy substrates: a review. Surf Rev Lett. 23, (03), 1630001. doi: 10.1142/S0218625X1630001X
   Web of Science ®Google Scholar
• Torabinejad, V., Aliofkhazraei, M., & Assareh, S. (2017). Electrodeposition of Ni-Fe alloys, composites, and nano coatings – a review. J Alloys Compd. 691, 841–859. doi: 10.1016/j.jallcom.2016.08.329
   Web of Science ®Google Scholar
• Allahyarzadeh, M., Aliofkhazraei, M., & Rezvanian, A. (2016). Ni-W electrodeposited coatings: characterization, properties and applications. Surf Coat Technol. 307, 978–1010. doi: 10.1016/j.surfcoat.2016.09.052
   Web of Science ®Google Scholar
• Datta, M., & Landolt, D. (2000). Fundamental aspects and applications of electrochemical microfabrication. Electrochim Acta. 45, (15), 2535–2558. doi: 10.1016/S0013-4686(00)00350-9
   Web of Science ®Google Scholar
• Torabinejad, V., Aliofkhazraei, M., & Sabour Rouhaghdam, A. (2016). Electrodeposition of Ni–Fe–Mn/Al2O3 functionally graded nanocomposite coatings. Surf Eng. doi:10.1080/02670844.2016.1151577.
   Web of Science ®Google Scholar
• Allahyarzadeh, M., Aliofkhazraei, M., & Sabour Rouhaghdam, A. (2016). Electrodeposition of Ni-W-Al2O3 nanocomposite coating with functionally graded microstructure. J Alloys Compd. 666, 217–226. doi: 10.1016/j.jallcom.2016.01.031
   Web of Science ®Google Scholar
• Allahyarzadeh, M., Aliofkhazraei, M., & Sabour Rouhaghdam, A. (2016). Functionally graded nickel–tungsten coating: electrodeposition, corrosion and wear behaviour. Can Metall Q. 55, (3), 303–311. doi: 10.1080/00084433.2016.1190542
   Web of Science ®Google Scholar
• Allahyarzadeh, M., Aliofkhazraei, M., & Sabour Rouhaghdam, A. (2016). Gradient electrodeposition of Ni-Cu-W (alumina) nanocomposite coating. Mater Design. 107, 74–81. doi: 10.1016/j.matdes.2016.06.019
   Web of Science ®Google Scholar
• Torabinejad, V., Sabour Rouhaghdam, A., & Aliofkhazraei, M. (2016). Ni–Fe–Al2O3 electrodeposited nanocomposite coating with functionally graded microstructure. Bull Mater Sci. 39, (3): 857–864. doi: 10.1007/s12034-016-1211-1
   Web of Science ®Google Scholar
• Yogesha, S., Udupa, K., & Hegde, A. (2012). Surface modification by multilayered Zn–Co alloy coatings. Surf Eng. 28, (1), 49–56. doi: 10.1179/1743294411Y.0000000009
   Web of Science ®Google Scholar
• Zhou, H., Wei, G., & Lou, J. (2013). FePt magnetic multilayers electrodeposited from non-aqueous liquids. Surf Eng. 29, (6), 434–439. doi: 10.1179/1743294413Y.0000000132
   Web of Science ®Google Scholar
• Torabinejad, V., Aliofkhazraei, M., & Sabour Rouhaghdam, A. (2016). Corrosion properties of Ni-Fe-Cr (III) multilayer coating synthesized via pulse duty cycle variation. Mater Corros. doi:10.1002/maco.201609071
   Google Scholar
• Torabinejad, V., Sabour Rouhaghdam, A., & Aliofkhazraei, M. (2016). Electrodeposition of Ni–Fe and Ni–Fe-(nano Al2O3) multilayer coatings. J Alloys Compd. 657, 526–536. doi: 10.1016/j.jallcom.2015.10.154
   Web of Science ®Google Scholar
• Torabinejad, V., Aliofkhazraei, M., & Sabour Rouhaghdam, A. (2016). Ni–Fe–Mn–(nano) Al2O3 coating with modulated composition and grain size. T Indian I Metals. doi:10.1007/s12666-016-0913-9.
   Google Scholar
• Bradley, P., & Landolt, D. (1999). Pulse-plating of copper–cobalt alloys. Electrochim Acta. 45, (7), 1077–1087. doi: 10.1016/S0013-4686(99)00301-1
   Web of Science ®Google Scholar
• Kelly, J., Bradley, P., & Landolt, D. (2000). Additive effects during pulsed deposition of Cu-Co nanostructures. J Electrochem Soc. 147, (8), 2975–2980. doi: 10.1149/1.1393634
   Web of Science ®Google Scholar
• Ebrahimi, F., & Kong, D. (1999). Effect of microstructure on strength and fracture of electrodeposited Cu/Ni layered nano-composites. Scripta Mater. 40, (5), 609–616. doi: 10.1016/S1359-6462(98)00449-7
   Web of Science ®Google Scholar
• Ebrahimi, F., Liscano, A., & Kong, D. (2003). Evolution of texture in electrodeposited Ni/Cu layered nanostructures. Philos Mag. 83, (4), 457–476. doi: 10.1080/0141861021000039455
   Web of Science ®Google Scholar
• Landolt, D. (2001). Fundamental aspects of alloy plating. Plat Surf Finish. 88, (9), 70–79.
   Google Scholar
• Brenner, A. (2013). Electrodeposition of alloys: principles and practice. New York: Elsevier.
   Google Scholar
• Lee, S., Choi, M., & Park, S. (2015). Mechanical properties of electrodeposited Ni-W thinfilms with alternate W-rich and W-poor multilayers. Electrochim Acta. 153, 225–231. doi: 10.1016/j.electacta.2014.11.190
   Web of Science ®Google Scholar
• Papachristos, V., Panagopoulos, C., & Wahlstrom, U. (2000). Effect of annealing on the structure and hardness of Ni–P–W multilayered alloy coatings produced by pulse plating. Mater Sci Eng: A. 279, (1), 217–230. doi: 10.1016/S0921-5093(99)00583-3
   Web of Science ®Google Scholar
• Alimadadi, H., Ahmadi, M., & Aliofkhazraei, M. (2009). Corrosion properties of electrodeposited nanocrystalline and amorphous patterned Ni–W alloy. Mater Design. 30, (4), 1356–1361. doi: 10.1016/j.matdes.2008.06.036
   Web of Science ®Google Scholar
• Aliofkhazraei, M., Ahangarani, S., & Sabour Rouhaghdam, A. (2010). Effect of the duty cycle of pulsed current on nanocomposite layers formed by pulsed electrodeposition. Rare Metals. 29, (2), 209–213. doi: 10.1007/s12598-010-0036-0
   Web of Science ®Google Scholar
• Aliofkhazraei, M., Sabour Rouhaghdam, A., & Ghobadi, E. (2010). Electrodeposition and mechanical and corrosion resistance properties of tertiary Ni-W/Al2O3/CNT nanocomposite coatings. Adv Mater Res. 89–91, Trans Tech Publ:12–16.
   Google Scholar
• Zhao, C., Yao, Y., & He, L. (2014). Electrodeposition and characterization of Ni-W/ZrO2 nanocomposite coatings. Bull Mater Sci. 37, (5), 1053–1058. doi: 10.1007/s12034-014-0044-z
   Web of Science ®Google Scholar
• Yao, Y., Yao, S., & Zhang, L. (2007). Electrodeposition and mechanical and corrosion resistance properties of Ni–W/SiC nanocomposite coatings. Mater Lett. 61, (1), 67–70. doi: 10.1016/j.matlet.2006.04.007
   Web of Science ®Google Scholar
• Auerswald, J., & Fecht, H. -J. (2010). Nanocrystalline Ni–W for wear-resistant coatings and electroforming. J Electrochem Soc. 157, (4), D199–D205. doi: 10.1149/1.3291984
   Google Scholar
• Mizushima, I., Tang, P. T., & Hansen, H. N. (2006). Residual stress in Ni–W electrodeposits. Electrochim Acta. 51, (27), 6128–6134. doi: 10.1016/j.electacta.2005.11.053
   Web of Science ®Google Scholar
• Priyadarshan, G. (2009). Electrodeposition of nickel-tungsten and nickel-molybdenum under ultrasonication. Ann Arbor: University of Nevada.
   Google Scholar
• Allahyarzadeh, M., Roozbehani, B., & Ashrafi, A. (2011). Electrodeposition of high Mo content amorphous/nanocrystalline Ni–Mo alloys using 1-methyl-imidazolium chloride ionic liquid as an additive. Surf Coat Technol. 206, (1), 137–142. doi: 10.1016/j.surfcoat.2011.07.004
   Web of Science ®Google Scholar
• Allahkaram, S. R., Golroh, S., & Mohammadalipour, M. (2011). Properties of Al2O3 nano-particle reinforced copper matrix composite coatings prepared by pulse and direct current electroplating. Mater Design. 32, (8), 4478–4484. doi: 10.1016/j.matdes.2011.03.042
   Web of Science ®Google Scholar
• Budevski, E., Staikov, G., & Lorenz, W. (2000). Electrocrystallization: nucleation and growth phenomena. Electrochim Acta. 45, (15), 2559–2574. doi: 10.1016/S0013-4686(00)00353-4
   Web of Science ®Google Scholar
• Landolt, D. (1994). Electrochemical and materials science aspects of alloy deposition. Electrochim Acta. 39, (8), 1075–1090. doi: 10.1016/0013-4686(94)E0022-R
   Web of Science ®Google Scholar
• Sharma, A., Bhattacharya, S., & Das, S. (2014). A study on the effect of pulse electrodeposition parameters on the morphology of pure tin coatings. Metall Mater Trans A. 45, (10), 4610–4622. doi: 10.1007/s11661-014-2389-8
   Web of Science ®Google Scholar
• Lajevardi, S., & Shahrabi, T. (2010). Effects of pulse electrodeposition parameters on the properties of Ni–TiO2 nanocomposite coatings. Appl Surf Sci. 256, (22), 6775–6781. doi: 10.1016/j.apsusc.2010.04.088
   Web of Science ®Google Scholar
• Beltowska-Lehman, E., Indyka, P., & Bigos, A. (2012). Electrodeposition of nanocrystalline Ni–W coatings strengthened by ultrafine alumina particles. Surf Coat Technol. 211, 62–66. doi: 10.1016/j.surfcoat.2011.10.021
   Web of Science ®Google Scholar
• Sriraman, K., Raman, S. G. S., & Seshadri, S. (2006). Synthesis and evaluation of hardness and sliding wear resistance of electrodeposited nanocrystalline Ni–W alloys. Mat Sci Eng: A. 418, (1), 303–311. doi: 10.1016/j.msea.2005.11.046
   Web of Science ®Google Scholar
• Wang, H. T., Sheu, H. H., & Ger, M. D. (2014). The effect of heat treatment on the microstructure and mechanical properties of electrodeposited nanocrystalline Ni-W/diamond composite coatings. Surf Coat Technol. 259, (PB), 268–273. doi: 10.1016/j.surfcoat.2014.03.064
   Web of Science ®Google Scholar
• Yao, Y. W. (2008). Preparation, mechanical property and wear resistance of Ni-W/Al 203 composite coatings. Surf Eng. 24, (3), 226–229. doi: 10.1179/174329408X282613
   Web of Science ®Google Scholar
• Hou, K. -H., & Chen, Y. -C. (2011). Preparation and wear resistance of pulse electrodeposited Ni–W/Al2O3 composite coatings. Appl Surf Sci. 257, (15), 6340–6346. doi: 10.1016/j.apsusc.2011.01.089
   Web of Science ®Google Scholar
• Wang, J. C., Cheng, X. D., & Li, D. H. (2006). Study on Ni-W-SiC nanometer electrodeposition process. Cailiao Gongcheng/J Mater Eng. (3), 25–28.
   Google Scholar
• Zhang, D. -W., Lei, T., & Li, F. -J. (2001). Laser cladding of stainless steel with Ni–Cr3C2 for improved wear performance. Wear. 251, (1), 1372–1376. doi: 10.1016/S0043-1648(01)00770-0
   Web of Science ®Google Scholar
• Sunwang, N., Wangyao, P., & Boonyongmaneerat, Y. (2011). The effects of heat treatments on hardness and wear resistance in Ni-W alloy coatings. Surf Coat Technol. 206, (6), 1096–1101. doi: 10.1016/j.surfcoat.2011.07.082
   Web of Science ®Google Scholar
• Udompanit, N., Wangyao, P., & Henpraserttae, S. (2014). Wear response of composition-modulated multilayer Ni-W coatings. Adv Mater Res. Trans Tech Publ:302–309.
   Google Scholar
• Chianpairot, A., Lothongkum, G., & Schuh, C. A. (2011). Corrosion of nanocrystalline Ni-W alloys in alkaline and acidic 3.5wt.% NaCl solutions. Corros Sci. 53, (3), 1066–1071. doi: 10.1016/j.corsci.2010.12.001
   Web of Science ®Google Scholar
• Lee, H. B. (2013). Synergy between corrosion and wear of electrodeposited Ni–W coating. Tribol Lett. 50, (3), 407–419. doi: 10.1007/s11249-013-0134-x
   Web of Science ®Google Scholar
• Feng, Q., Li, T., & Teng, H. (2008). Investigation on the corrosion and oxidation resistance of Ni–Al2O3 nano-composite coatings prepared by sediment co-deposition. Surf Coat Technol. 202, (17), 4137–4144. doi: 10.1016/j.surfcoat.2008.03.001
   Web of Science ®Google Scholar
• Goldasteh, H., & Rastegari, S. (2014). The influence of pulse plating parameters on structure and properties of Ni–W–TiO2 nanocomposite coatings. Surf Coat Technol. 259, 393–400. doi: 10.1016/j.surfcoat.2014.10.064
   Web of Science ®Google Scholar
• Wang, L., Lin, Y., & Zeng, Z. (2007). Electrochemical corrosion behavior of nanocrystalline co coatings explained by higher grain boundary density. Electrochim Acta. 52, (13), 4342–4350. doi: 10.1016/j.electacta.2006.12.009
   Web of Science ®Google Scholar
• Tian, B., & Cheng, Y. (2007). Electrolytic deposition of Ni–Co–Al2O3 composite coating on pipe steel for corrosion/erosion resistance in oil sand slurry. Electrochim Acta. 53, (2), 511–517. doi: 10.1016/j.electacta.2007.07.013
   Web of Science ®Google Scholar
• Ahmad, Z.: Principles of corrosion engineering and corrosion control. Burlington (MA): Butterworth-Heinemann; 2006.
   Google Scholar
• Sriraman, K., Raman, S. G. S., & Seshadri, S. (2007). Corrosion behaviour of electrodeposited nanocrystalline Ni–W and Ni–Fe–W alloys. Mater Sci Eng: A. 460, 39–45. doi: 10.1016/j.msea.2007.02.055
   Web of Science ®Google Scholar
• Panagopoulos, C. N., Plainakis, G. D., & Tsoutsouva, M. G. (2015). Corrosion of nanocrystalline Ni-W coated copper. J Surf Eng Mater Adv Technol. 5, (02), 65.
   Google Scholar