References
- Chen XB, Yang HY, Abbott T, et al. Corrosion protection of magnesium and its alloys by metal phosphate conversion coatings. Surf Eng. 2014;30(12):871–879. doi: 10.1179/1743294413Y.0000000235
- Díaz B, Freire L, Mojío M, et al. Effect of carbon on the corrosion and wear performance of Zn-phosphate layers. Electrochem Acta. 2016;202:299–309. doi: 10.1016/j.electacta.2015.12.083
- Darband GB, Afshar A, Rabani M. Effect of treatment time and temperature on microstructure and corrosion behavior of Zn-Ni electrophosphate coating. J Alloys Compd. 2016;688:596–604. doi: 10.1016/j.jallcom.2016.07.032
- Rezaee N, Attar M, Ramezanzadeh B. Studying corrosion performance, microstructure and adhesion properties of a room temperature zinc phosphate conversion coating containing Mn2+ on mild steel. Surf Coat Technol. 2013;236:361–367. doi: 10.1016/j.surfcoat.2013.10.014
- Banczek EP, Rodrigues PRP, Costa I. Investigation on the effect of benzotriazole on the phosphating of carbon steel. Surf Coat Technol. 2006;201(6):3701–3708. doi: 10.1016/j.surfcoat.2006.09.003
- Diaz B, Freire L, Mojio M, et al. Optimization of conversion coatings based on zinc phosphate on high strength steels, with enhanced barrier properties. J Electroanal Chem. 2015;737:174–183. doi: 10.1016/j.jelechem.2014.06.035
- Zhang S. Study on phosphating treatment of aluminum alloy: role of yttrium oxide. J Rare Earth. 2009;27(3):469–473. doi: 10.1016/S1002-0721(08)60271-9
- Van Phuong N, Moon S, Chang D, et al. Effect of microstructure on the zinc phosphate conversion coatings on magnesium alloy AZ91. Appl Surf Sci. 2013;264:70–78. doi: 10.1016/j.apsusc.2012.09.119
- Popic J, Jegdic B, Bajat J, et al. The effect of deposition temperature on the surface coverage and morphology of iron-phosphate coatings on low carbon steel. Appl Surf Sci. 2011;257(24):10855–10862.
- Kavitha C, Narayanan TS, Ravichandran K, et al. Deposition of zinc–zinc phosphate composite coatings on aluminium by cathodic electrochemical treatment. Surf Coat Technol. 2014;258:539–548. doi: 10.1016/j.surfcoat.2014.08.040
- Arthanareeswari M, Sankara Narayanan T, Kamaraj P, et al. Influence of galvanic coupling on the formation of zinc phosphate coating. Indian J Chem Technol. 2010;17(3):167–175.
- Wang J, Zhou W, Du Y. Effect of sodium silicate pretreatment on phosphate layer: morphology and corrosion resistance behavior. Mater Corros. 2012;63(4):317–322. doi: 10.1002/maco.201005742
- Jain R, Bhagawati B, Khandagiri P, et al. Anticorrosive and lubricating polyphenol coatings on galvanneal steel. Surf Eng. 2016: 1–18. doi:10.1080/02670844.2016.1214385.
- Tamilselvi M, Kamaraj P, Arthanareeswari M, et al. Development of nano SiO2 incorporated nano zinc phosphate coatings on mild steel. Appl Surf Sci. 2015;332:12–21. doi: 10.1016/j.apsusc.2015.01.177
- Shibli SMA, Chacko F. Development of nano TiO2-incorporated phosphate coatings on hot dip zinc surface for good paintability and corrosion resistance. Appl Surf Sci. 2011;257(7):3111–3117. doi: 10.1016/j.apsusc.2010.10.125
- Tsai CY, Liu JS, Chen PL, et al. Effect of Mg2+ on the microstructure and corrosion resistance of the phosphate conversion coating on hot-dip galvanized sheet steel. Corros Sci. 2010;52(12):3907–3916. doi: 10.1016/j.corsci.2010.08.007
- Zeng R, Lan Z, Kong L, et al. Characterization of calcium-modified zinc phosphate conversion coatings and their influences on corrosion resistance of AZ31 alloy. Surf Coat Technol. 2011;205(11):3347–3355. doi: 10.1016/j.surfcoat.2010.11.027
- Li Q, Xu S, Hu J, et al. The effects to the structure and electrochemical behavior of zinc phosphate conversion coatings with ethanolamine on magnesium alloy AZ91D. Electrochim Acta. 2010;55(3):887–894. doi: 10.1016/j.electacta.2009.06.048
- Amini R, Sarabi AA. The corrosion properties of phosphate coating on AZ31 magnesium alloy: the effect of sodium dodecyl sulfate (SDS) as an eco-friendly accelerating agent. Appl Surf Sci. 2011;257(16):7134–7139. doi: 10.1016/j.apsusc.2011.03.072
- Ogle K, Buchheit RG. Conversion coatings: in encyclopedia of electrochemistry. Vol. 4, Wiley-VCH Verlag GmbH & Co. KGaA; 2007. p. 460–499. Available from: http://onlinelibrary.wiley.com/doi/10.1002/9783527610426.bard040503/abstract?userIsAuthenticated=false&deniedAccessCustomisedMessage=.
- Wolpers M, Angeli J. Activation of galvanized steel surfaces before zinc phosphating─XPS and GDOES investigations. Appl Surf Sci. 2001;179(1–4):281–291. doi: 10.1016/S0169-4332(01)00296-3
- Narayanan T. Phosphate conversion coatings─a metal pretreatment process. Corros Rev. 2011;12(3–4):201–238.
- Abdalla K, Rahmat A, Azizan A. Effect of copper (II) acetate pretreatment on zinc phosphate coating morphology and corrosion resistance. J Coat Technol Res. 2013;10(1):133–139. doi: 10.1007/s11998-012-9423-9
- Abdalla K, Rahmat A, Azizan A. Influence of activation treatment with nickel acetate on the zinc phosphate coating formation and corrosion resistance. Mater Corros. 2014;65(10):977–981. doi: 10.1002/maco.201307009
- Pletcher D, Walsh FC. Industrial electrochemistry. 2nd ed. London: Kluwer Academic Pub; 1990.
- Ashby MF, Shercliff H, Cebon D. Materials: engineering, science, processing and design. 2nd ed. Oxford: Butterworth-Heinemann; 2009.
- Jegannathan S, Narayanan TS, Ravichandran K, et al. Evaluation of the corrosion resistance of phosphate coatings obtained by anodic electrochemical treatment. Prog Org Coat. 2006;57(4):392–399. doi: 10.1016/j.porgcoat.2006.09.023
- Tamilselvi M, Kamaraj P, Arthanareeswari M, et al. Nano zinc phosphate coatings for enhanced corrosion resistance of mild steel. Appl Surf Sci. 2015;327:218–225. doi: 10.1016/j.apsusc.2014.11.081
- Weng D, Jokiel P, Uebleis A, et al. Corrosion and protection characteristics of zinc and manganese phosphate coatings. Surf Coat Technol. 1997;88(1–3):147–156. doi: 10.1016/S0257-8972(96)02860-5
- Sheng M, Wang Y, Zhong Q, et al. The effects of nano-SiO2 additive on the zinc phosphating of carbon steel. Surf Coat Technol. 2011;205(11):3455–3460. doi: 10.1016/j.surfcoat.2010.12.011
- Pan Y, Yu G, Hu B, et al. Influence of activation on performance of nickel–phosphorous coating. Surf Eng. 2015;31(9):685–692. doi: 10.1179/1743294415Y.0000000052
- Ghanbari A, Attar M. A study on the anticorrosion performance of epoxy nanocomposite coatings containing epoxy-silane treated nano-silica on mild steel substrate. J Ind Eng Chem. 2015;23:145–153. doi: 10.1016/j.jiec.2014.08.008
- Seifzadeh D, Farhoudi L. Electroless Co–P plating on magnesium alloy and its anti-corrosion properties. Surf Eng. 2016;32(5):348–355. doi: 10.1179/1743294415Y.0000000034
- Golru SS, Attar M, Ramezanzadeh B. Morphological analysis and corrosion performance of zirconium based conversion coating on the aluminum alloy 1050. J Ind Eng Chem. 2015;24:233–244. doi: 10.1016/j.jiec.2014.09.036
- Kellner FJJ, Schütze K, Kreutz C, et al. Electrochemical and surface analytical study of the corrosion behavior of mild steel with cathodically produced zinc phosphate coating. Surf Interface Anal. 2009;41(12–13):911–917. doi: 10.1002/sia.3118
- Jiang CC, Xiao GY, Zhang X, et al. Formation and corrosion resistance of a phosphate chemical conversion coating on medium carbon low alloy steel. New J Chem. 2016;40(2):1347–1353. doi: 10.1039/C5NJ02245B