Effect of temperature on the residual stress of a β-PbO₂ coating

References

• Garcia-Espinoza JD, Gortares-Moroyoqui P, Orta-Ledesma MT, et al. Electrochemical removal of carbamazepine in water with Ti/PbO2 cylindrical mesh anode, water science and technology. Water Sci Technol. 2016;73:1155–1165.
   PubMed Web of Science ®Google Scholar
• Ghanbari F, Moradi M, Mehdipour F, et al. Simultaneous application of copper and PbO2 anodes for electrochemical treatment of olive oil mill wastewater. Desalin Water Treat. 2016;57:5828–5836. doi: 10.1080/19443994.2015.1005144
   Web of Science ®Google Scholar
• Yang H, Liang J, Zhang L, et al. Electrochemical oxidation degradation of methyl orange wastewater by Nb/PbO2 electrode. Int J Electrochem Sci. 2016;11:1121–1134.
   Web of Science ®Google Scholar
• Chen Z, Yu Q, Liao D-h, et al. Influence of nano-CeO2 on coating structure and properties of electrodeposited Al/alpha-PbO2/beta-PbO2. Trans Nonferr Met Soc China. 2013;23:1382–1389. doi: 10.1016/S1003-6326(13)62607-2
   Web of Science ®Google Scholar
• Li P, Zhao Y, Ding B, et al. Effect of calcination temperature and molar ratio of tin and manganese on capacitance of Ti/SnO2-Sb-Mn/beta-PbO2 electrode during phenol electro-oxidation. J Electroanal Chem. 2015;747:45–52. doi: 10.1016/j.jelechem.2015.02.029
   Web of Science ®Google Scholar
• Zhang Q, Guo X, Cao X, et al. Facile preparation of a Ti/alpha-PbO2/beta-PbO2 electrode for the electrochemical degradation of 2-chlorophenol. Chin J Catal. 2015;36:975–981. doi: 10.1016/S1872-2067(15)60851-8
   Web of Science ®Google Scholar
• Mukimin A, Vistanty H, Zen N. Oxidation of textile wastewater using cylinder Ti/beta-PbO2 electrode in electrocatalytic tube reactor. Chem Eng J. 2015;259:430–437. doi: 10.1016/j.cej.2014.08.020
   Web of Science ®Google Scholar
• Saratale RG, Hwang K-J, Song J-Y, et al. Electrochemical oxidation of phenol for wastewater treatment using Ti/PbO2 electrode. J Environ Eng. 2016;142: 04015064. doi: 10.1061/(ASCE)EE.1943-7870.0001007
   PubMed Web of Science ®Google Scholar
• Xu M, Wang ZC, Wang FW, et al. Fabrication of cerium doped Ti/nanoTiO(2)/PbO2 electrode with improved electrocatalytic activity and its application in organic degradation. Electrochim Acta. 2016;201:240–250. doi: 10.1016/j.electacta.2016.03.168
   Web of Science ®Google Scholar
• Mo HL, Tang Y, Wang XZ, et al. Development of a three-dimensional structured carbon fiber felt/beta-PbO2 electrode and Its application in chemical oxygen demand determination. Electrochim Acta. 2015;176:1100–1107. doi: 10.1016/j.electacta.2015.07.126
   Web of Science ®Google Scholar
• Dai QZ, Xia YJ, Chen JM. Mechanism of enhanced electrochemical degradation of highly concentrated aspirin wastewater using a rare earth La-Y co-doped PbO2 electrode. Electrochim Acta. 2016;188:871–881. doi: 10.1016/j.electacta.2015.10.120
   Web of Science ®Google Scholar
• Sun J, Du DX, Lv HF, et al. Microstructure and corrosion resistance of pulse electrodeposited Ni-Cr coatings. Surf Eng. 2015;31:406–411. doi: 10.1179/1743294414Y.0000000392
   Web of Science ®Google Scholar
• Janssen G, Kamminga JD. Stress in hard metal films. Appl Phys Lett. 2004;85:3086–3088. doi: 10.1063/1.1807016
   Web of Science ®Google Scholar
• Machunze R, Janssen GCAM. Stress and strain in titanium nitride thin films. Thin Solid Films. 2009;517:5888–5893. doi: 10.1016/j.tsf.2009.04.020
   Web of Science ®Google Scholar
• Kang YL, Qiu Y, Lei ZK, et al. An application of Raman spectroscopy on the measurement of residual stress in porous silicon. Opt Lasers Eng. 2005;43:847–855. doi: 10.1016/j.optlaseng.2004.09.005
   Web of Science ®Google Scholar
• Kowalski W, Dammer M, Bakczewitz F, et al. In-situ investigation of stress conditions during expansion of bare metal stents and PLLA-coated stents using the XRD sin(2) psi-technique. J Mech Behav Biomed Mater. 2015;49:23–29. doi: 10.1016/j.jmbbm.2015.04.020
   PubMed Web of Science ®Google Scholar
• Sinkovits T, Zhao Y, O'Brien R, et al. X-ray diffraction stress analysis of interrupted titanium nitride films: combining the sin(2)psi and crystallite group methods. Thin Solid Films. 2014;562:206–210. doi: 10.1016/j.tsf.2014.04.054
   Web of Science ®Google Scholar
• Wang A-N, Chuang C-P, Yu G-P, et al. Determination of average X-ray strain (AXS) on TiN hard coatings using cos(2)alpha sin(2)psi X-ray diffraction method. Surf Coat Technol. 2015;262:40–47. doi: 10.1016/j.surfcoat.2014.12.009
   Web of Science ®Google Scholar
• Guerain M, Duriez C, Grosseau-Poussard JL, et al. Review of stress fields in zirconium alloys corrosion scales. Corros Sci. 2015;95:11–21. doi: 10.1016/j.corsci.2015.03.004
   Web of Science ®Google Scholar
• Fu P, Jiang C, Zhang Z, et al. Residual stress and micro-structure of GCr15 steel after multistep shot peening. Surf Eng. 2014;30:847–851. doi: 10.1179/1743294414Y.0000000332
   Web of Science ®Google Scholar
• Windischmann H. Intrinsic stress in sputtered thin films. J Vac SciTechnol A Vac Surf Films. 1991;9:2431–2436. doi: 10.1116/1.577295
   Web of Science ®Google Scholar