Microstructure and corrosion behaviour of laser-cladded γ-Ni/Mo₂Ni₃Si alloy coating

References

• Mnif R, Baccouch Z, Elleuch R, et al. Investigations of high temperature wear mechanisms for tool steel under open-sliding contact. J Mater Eng Perform. 2014;23:2864–2870. doi: 10.1007/s11665-014-1082-9
   Web of Science ®Google Scholar
• Senio N, Newman R, Wang S, et al. Understanding and quantifying the anoxic corrosion of carbon steel in a Swiss L/ILW repository environment. Corros Eng Sci Technol. 2017;52:78–83. doi: 10.1080/1478422X.2017.1303102
   Google Scholar
• Lin J, Wang Z, Lin P, et al. Microstructure and corrosion resistance of Fe-based coatings prepared by twin wires arc spraying process. J Therm Spray Technol. 2014;23:333–339. doi: 10.1007/s11666-013-0017-6
   Web of Science ®Google Scholar
• Tuominen J, Näkki J, Pajukoski H, et al. Microstructural and abrasion wear characteristics of laser-clad tool steel coatings. Surf Eng. 2016;32:923–933. doi: 10.1080/02670844.2016.1180496
   Web of Science ®Google Scholar
• Han CF, Wang QQ, Sun YF, et al. Effects of molybdenum on the wear resistance and corrosion resistance of carbidic austempered ductile iron. Metallogr Microstruct Anal. 2015;4:298–304. doi: 10.1007/s13632-015-0215-3
   Web of Science ®Google Scholar
• Zhang BG, Li XP, Wang ZL. Mechanical behaviour and oxidation resistance of structural silicides. Int Mater Rev. 2006;51:13–64. doi: 10.1179/174328006X79454
   Web of Science ®Google Scholar
• Matsunoshita H, Sasai Y, Fujiwara K, et al. Plastic deformation of directionally solidified ingots of binary and some ternary MoSi2/Mo5Si3 eutectic composites. Sci Technol Adv Mater. 2016;17:517–529. doi: 10.1080/14686996.2016.1218248
   PubMed Web of Science ®Google Scholar
• Verdian MM, Raeissi K, Salehi M. On corrosion behaviour of HVOF sprayed Ni3Si intermetallic powders. Mater Sci Technol. 2014;30:481–485. doi: 10.1179/1743284713Y.0000000384
   Web of Science ®Google Scholar
• Xu JT, Li A, Liu D, et al. Research on corrosion resistance and wear resistance of laser cladding Cr3Si/γmulti-phase coating. Chin J Lasers. 2016;43:66–72. Chinese.
   Google Scholar
• Lu Q, Zhu G, Wang X, et al. Effects of raw materials on synthesis, microstructure and properties of MoSi2-10vol% SiC composites. T Indian Ceram Soc. 2016;75:33–39. doi: 10.1080/0371750X.2016.1147376
   Web of Science ®Google Scholar
• Yue TM, Zhang H. Microstructure and wear resistance of compositionally graded Ti-Si laser-clad coatings. Mater Res Innov. 2015;19:9–13. doi: 10.1179/1432891715Z.0000000001905
   Google Scholar
• Cui C, Tian L, Zhang J, et al. Microstructure and property of directionally solidified Ni–Si hypereutectic alloy. Appl Phys A. 2016;122:167–173.
   Web of Science ®Google Scholar
• Villars P, Prince A, Okamoto H. Handbook of ternary alloy phase diagrams;. Ohio: ASM International Materials Park; 1995.
   Google Scholar
• Li Y, Li CR, Du ZM, et al. As-cast microstructures and solidification paths of the Nb-Si-Ti ternary alloys in Nb5Si3-Ti5Si3 region. Rare Met. 2013;32:502–511. doi: 10.1007/s12598-013-0143-9
   Web of Science ®Google Scholar
• Yin J, Wang DZ, Meng L, et al. High-temperature slide wear of Ni-Cr-Si metal silicide based composite coatings on copper substrate by laser-induction hybrid cladding. Surf Coat Technol. 2017;325:120–126. doi: 10.1016/j.surfcoat.2017.06.063
   Web of Science ®Google Scholar
• Mehrizi MZ, Shamanian M, Saidi A, et al. Laser cladding of CoWSi/WSi2 on Ni substrate and evaluation of its high temperature oxidation behavior. Ceram Int. 2014;40:13447–13452. doi: 10.1016/j.ceramint.2014.05.065
   Web of Science ®Google Scholar
• Wang HM, Tang HB, Cai LX, et al. Microstructure and wear properties of laser clad Ti2Ni3Si/Ni3Ti multiphase intermetallic coatings. Appl Phys A. 2005;80:1677–1682. doi: 10.1007/s00339-003-2446-4
   Web of Science ®Google Scholar
• Esparza N, Rangel V, Gutierrez A, et al. A comparison of the effect of Cr and Al additions on the oxidation behaviour of alloys from the Nb-Cr-Si system. J Therm Technol. 2016;33:105–113.
   Google Scholar
• Sun RL, Lei YW, Niu W. Laser clad Cr3C2-Ni composite coating on titanium alloys. Surf Eng. 2013;25:206–210. doi: 10.1179/026708409X375299
   Web of Science ®Google Scholar
• Hou L, Tong H, Dai Y, et al. Correlation between microstructures and mechanical properties in Ni-rich Ni-Mn-Ga high-temperature shape-memory alloys. Mater Sci Technol. 2017;33:1–6.
   Google Scholar
• Ren J, Liu XB, Lu XL, et al. Microstructure and tribological properties of self-lubricating anti wear composite coating on Ti6Al4V alloy. Surf Eng. 2017;33:20–26. doi: 10.1179/1743294415Y.0000000054
   Web of Science ®Google Scholar
• Kaiming W, Yulong L, Hanguang F, et al. A study of laser cladding NiCrBSi/Mo composite coatings. Surf Eng. 2016;32:1–8. doi: 10.1179/1743294415Y.0000000057
   Google Scholar
• Yongliang G., Chunyan S, Li Y, et al. Microstructure and tribological properties of NiMo/Mo2Ni3Si intermetallic ‘in-situ’ composites. J Alloys Compd. 2011;509:4987–4991. doi: 10.1016/j.jallcom.2011.01.179
   Web of Science ®Google Scholar
• Xu YW, Wang HM. Oxidation behaviour of γ/Mo2Ni3Si ternary metal silicide alloy. J Alloys Compd. 2008;457:239–243. doi: 10.1016/j.jallcom.2007.03.047
   Web of Science ®Google Scholar
• Gupta KP. The Mo-Ni-Si (molybdenum-nickel-silicon) system. J Phase Equilib Diffus. 2005;26:379–384. doi: 10.1007/s11669-005-0095-3
   Web of Science ®Google Scholar