References
- Yin F, Hua L, Mao H, et al. Microstructural modeling and simulation for GCr15 steel during elevated temperature deformation. Mater Des. 2013;55(6):560–573.
- Fu J. Microstructure and corrosion behavior of hot-rolled GCr15 bearing steel. Appl Phys A. 2016;122(4):416.
- Zhou J, Xu J, Huang S, et al. Microstructure and mechanical properties of Cr12MoV by ultrasonic vibration-assisted laser surface melting. Mater Sci Technol. 2017;33(10):1200–1207.
- Riveiro A, Mejías A, Lusquiños F, et al. Laser cladding of aluminium on AISI 304 stainless steel with high-power diode lasers. Surf Coat Technol. 2014;253(9):214–220.
- Qunshuang M, Yajiang L, Juan W. Surface modification of Q550 HSLA steel with Co-Fe-Cr composite coatings manufactured by fibre laser cladding. Surf Eng. 2016;32(12):934–942.
- Weng F, Yu H, Liu J, et al. Microstructure and wear property of the Ti 5 Si 3/TiC reinforced Co-based coatings fabricated by laser cladding on Ti-6Al-4V. Opt Laser Technol. 2017;92:156–162.
- Wang Y, Liu B, Guo Z. Wear resistance of machine tools’ bionic linear rolling guides by laser cladding. Opt Laser Technol. 2017;91:55–62.
- Tuominen J, Näkki J, Pajukoski H, et al. Microstructural and abrasion wear characteristics of laser-clad tool steel coatings. Surf Eng. 2016;32(12):923–933.
- Foroozmehr E, Lin D, Kovacevic R. Application of vibration in the laser powder deposition process. J Manuf Process. 2009;11(1):38–44.
- Li M, Han B, Wang Y, et al. Investigation on laser cladding high-hardness nano-ceramic coating assisted by ultrasonic vibration processing. Optik-Int J Light Electron Optics. 2016;127(11):4596–4600.
- Wu D, Guo M, Ma G, et al. Dilution characteristics of ultrasonic assisted laser clad yttria-stabilized zirconia coating. Mater Lett. 2015;141:207–209.
- Gao W, Zhao S, Liu F, et al. Effect of defocus manner on laser cladding of Fe-based alloy powder. Surf Coat Technol. 2014;248(13):54–62.
- Makuch N, Kulka M, Dziarski P, et al. Laser surface alloying of commercially pure titanium with boron and carbon. Opt Lasers Eng. 2014;57(6):64–81.
- Huang Y, Zeng X, Hu Q, et al. Microstructure and interface interaction in laser induction hybrid cladding of Ni-based coating. Appl Surf Sci. 2009;255(7):3940–3945.
- Xu P, Lin CX, Zhou CY, et al. Wear and corrosion resistance of laser cladding AISI 304 stainless steel/Al2O3, composite coatings. Surf Coat Technol. 2014;238(2):9–14.
- Liu F, Mao Y, Lin X, et al. Microstructure and high temperature oxidation resistance of Ti-Ni gradient coating on TA2 titanium alloy fabricated by laser cladding. Opt Laser Technol. 2016;83:140–147.
- Oh YK, Park SH, Cho YI. A study of the effect of ultrasonic vibrations on phase-change heat transfer. Int J Heat Mass Transf. 2002;45(23):4631–4641.
- Liu X, Osawa Y, Takamori S, et al. Microstructure and mechanical properties of AZ91 alloy produced with ultrasonic vibration. Mat Sc Eng: A. 2008;487(1–2):120–123.
- Liu H, Xu Q, Wang C, et al. Corrosion and wear behavior of Ni60CuMoW coatings fabricated by combination of laser cladding and mechanical vibration processing. J Alloys Compd. 2015;621:357–363.
- Zhou S, Xiong Z, Dai X, et al. Microstructure and oxidation resistance of cryomilled NiCrAlY coating by laser induction hybrid rapid cladding. Surf Coat Technol. 2014;258(12):943–949.
- Cai CX, Liu HX, Jiang YH, et al. Influence of AC magnetic field on microstructure and wear behaviors of laser cladding Fe-based composite coating. Tribology. 2013;33(3):229–235.
- Liu HX, Tao XD, Zhang XW, et al. Microstructure and interface distribution of Fe-Cr-Si-B-C laser cladding alloy coatings assisted by mechanical vibration. Opt Precis Eng. 2015;23(8):2192–2202.
- Wu G, Ren F, Yao J, et al. Abrasion resistance mechanism of new cobalt based alloy by diode laser cladding. Chinese J Lasers. 2017;44(06):0602006.
- Xuan HF, Wang QY, Bai SL, et al. A study on microstructure and flame erosion mechanism of a graded Ni-Cr-B-Si coating prepared by laser cladding. Surf Coat Technol. 2014;244(15):203–209.
- Qiu Z, Zhang P, Wei D, et al. Tribological behavior of CrCoNiAlTiY coating synthesized by double-glow plasma surface alloying technique. Tribol Int. 2015;92:512–518.
- Masanta M, Shariff SM, Choudhury AR. Evaluation of modulus of elasticity, nano-hardness and fracture toughness of TiB2–TiC–Al2O3 composite coating developed by SHS and laser cladding. Mat Sci Eng A. 2011;528(16):5327–5335.
- Leyland A, Matthews A. On the significance of the H/E, ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour. Wear. 2000;246(1–2):1–11.
- Xu J, Fan HS, Li ZY. Role of Al additions in wear control of nanocrystalline Mo(Si1−xAlx)2 coatings prepared by double cathode glow discharge technique. Mater Sci Technol. 2013;29(8):900–907.
- Tan H, Luo Z, Li Y, et al. Effect of strengthening particles on the dry sliding wear behavior of Al2O3–M7C3/Fe metal matrix composite coatings produced by laser cladding. Wear. 2015;s324–325:36–44.
- Du ZM, Li JP. Study of the preparation of Al2O3sf·SiCp/Al composites and their wear-resisting properties. J Mat Process Tech. 2004;151(1):298–301.
- Chen C, Lu C, Feng X, et al. Effects of annealing on Al–Si coating synthesised by mechanical alloying. Surf Eng. 2017;33(7):548–558.