Optimisation of fluorapatite coating synthesis applied to a biodegradable substrate

References

• Wang M, Qian R, Bao M, et al. Raman, FT-IR and XRD study of bovine bone mineral and carbonated apatites with different carbonate levels. Mater Lett. 2018;210:203–206. doi: 10.1016/j.matlet.2017.09.023
   Web of Science ®Google Scholar
• Yang D, Zhao Z, Bai F, et al. Promoting cell migration in tissue engineering scaffolds with graded channels. Adv Healthcare Mater. 2017;6(18):1–2. doi: 10.1002/adhm.201700472
   Web of Science ®Google Scholar
• Bose S, Roy M, Bandyopadhyay A. Recent advances in bone tissue engineering scaffolds. Trends Biotechnol. 2012;30(10):546–554. doi: 10.1016/j.tibtech.2012.07.005
   PubMed Web of Science ®Google Scholar
• Umeda H, Mano T, Harada K, et al. Appearance of cell-adhesion factor in osteoblast proliferation and differentiation of apatite coating titanium by blast coating method. J Mater Sci: Mater Med. 2017;28(8):112.
   PubMed Web of Science ®Google Scholar
• Leilei Z, Shaoxian L, Hejun L, et al. Hydroxyapatite coating on C/C with graphene oxide interlayer. Surf Eng. 2017;10: 1–8.
   Google Scholar
• Polo-Corrales L, Latorre-Esteves M, Ramirez-Vick JE. Scaffold design for bone regeneration. J Nanosci Nanotechnol. 2014;14(1):15–56. doi: 10.1166/jnn.2014.9127
   PubMed Web of Science ®Google Scholar
• Razavi M, Fathi M, Savabi O, et al. Biodegradable magnesium alloy coated by fluoridated hydroxyapatite using MAO/EPD technique. Surf Eng. 2014;30(8):545–551. doi: 10.1179/1743294414Y.0000000284
   Web of Science ®Google Scholar
• Yazdimamaghani M, Razavi M, Vashaee D, et al. Microstructural and mechanical study of PCL coated Mg scaffolds. Surf Eng. 2014;30(12):920–926. doi: 10.1179/1743294414Y.0000000307
   Web of Science ®Google Scholar
• Sola A, Bellucci D, Cannillo V, et al. Bioactive glass coatings: a review. Surf Eng. 2011;27(8):560–572. doi: 10.1179/1743294410Y.0000000008
   Web of Science ®Google Scholar
• Hermawan H, Purnama A, Dube D, et al. Fe–Mn alloys for metallic biodegradable stents: degradation and cell viability studies. Acta Biomaterialia. 2010;6(5):1852–1860. doi: 10.1016/j.actbio.2009.11.025
   PubMed Web of Science ®Google Scholar
• Schinhammer M, Gerber I, Hänzi AC, et al. On the cytocompatibility of biodegradable Fe-based alloys. Mater Sci Eng: C. 2013;33(2):782–789. doi: 10.1016/j.msec.2012.11.002
   PubMed Web of Science ®Google Scholar
• Peuster M, Wohlsein P, Brügmann M, et al. A novel approach to temporary stenting: degradable cardiovascular stents produced from corrodible metal – results 6–18 months after implantation into New Zealand white rabbits. Heart. 2001;86(5):563–569. doi: 10.1136/heart.86.5.563
   PubMed Web of Science ®Google Scholar
• Kim H-W, Kim H-E, Knowles JC. Fluor-hydroxyapatite sol–gel coating on titanium substrate for hard tissue implants. Biomaterials. 2004;25(17):3351–3358. doi: 10.1016/j.biomaterials.2003.09.104
   PubMed Web of Science ®Google Scholar
• Cheng K, Han G, Weng W, et al. Sol–gel derived fluoridated hydroxyapatite films. Mater Res Bull. 2003;38(1):89–97. doi: 10.1016/S0025-5408(02)00985-6
   Web of Science ®Google Scholar
• Wang Y, Zhang S, Zeng X, et al. Osteoblastic cell response on fluoridated hydroxyapatite coatings. Acta Biomater. 2007;3(2):191–197. doi: 10.1016/j.actbio.2006.10.002
   PubMed Web of Science ®Google Scholar
• Weng W, Zhang S, Cheng K, et al. Sol–gel preparation of bioactive apatite films. Surf Coat Technol. 2003;167(2–3):292–296. doi: 10.1016/S0257-8972(02)00922-2
   Web of Science ®Google Scholar
• Tredwin CJ, Georgiou G, Kim H-W, et al. Hydroxyapatite, fluor-hydroxyapatite and fluorapatite produced via the sol–gel method: bonding to titanium and scanning electron microscopy. Dent Mater. 2013;29(5):521–529. doi: 10.1016/j.dental.2013.02.002
   PubMed Web of Science ®Google Scholar
• Tredwin CJ, Young AM, Georgiou G, et al. Hydroxyapatite, fluor-hydroxyapatite and fluorapatite produced via the sol–gel method. optimisation, characterisation and rheology. Dent Mater. 2013;29(2):166–173. doi: 10.1016/j.dental.2012.11.008
   PubMed Web of Science ®Google Scholar
• Kim HW, Kim HE, Knowles JC. Sol-gel apatite films on titanium implant for hard tissue regeneration. Key engineering materials. 2004;254:423–426.
   Google Scholar
• Kim HW, Kim HE, Knowles JC. Improvement of hydroxyapatite sol–gel coating on titanium with ammonium hydroxide addition. J Am Ceram Soc. 2005;88(1):154–159. doi: 10.1111/j.1551-2916.2004.00030.x
   Web of Science ®Google Scholar
• Kim H-W, Kong Y-M, Bae C-J, et al. Sol–gel derived fluor-hydroxyapatite biocoatings on zirconia substrate. Biomaterials. 2004;25(15):2919–2926. doi: 10.1016/j.biomaterials.2003.09.074
   PubMed Web of Science ®Google Scholar
• Romonţi DC, Iskra J, Bele M, et al. Elaboration and characterization of fluorohydroxyapatite and fluoroapatite sol-gel coatings on CoCrMo alloy. J Alloy Compd. 2016;665:355–364. doi: 10.1016/j.jallcom.2016.01.072
   Web of Science ®Google Scholar
• Liu D-M, Troczynski T, Tseng WJ. Water-based sol–gel synthesis of hydroxyapatite: process development. Biomaterials. 2001;22(13):1721–1730. doi: 10.1016/S0142-9612(00)00332-X
   PubMed Web of Science ®Google Scholar
• Kim HW, Knowles JC, Kim HE. Development of hydroxyapatite bone scaffold for controlled drug release via poly (ϵ-caprolactone) and hydroxyapatite hybrid coatings. J Biomed Mater Res Part B: Appl Biomater. 2004;70(2):240–249. doi: 10.1002/jbm.b.30038
   PubMedGoogle Scholar
• Kim H-W, Koh Y-H, Li L-H, et al. Hydroxyapatite coating on titanium substrate with titania buffer layer processed by sol–gel method. Biomaterials. 2004;25(13):2533–2538. doi: 10.1016/j.biomaterials.2003.09.041
   PubMed Web of Science ®Google Scholar
• Sun RX, Liu P, Zhang RX, et al. Hydrothermal synthesis of microstructured fluoridated hydroxyapatite coating on magnesium alloy. Surf Eng. 2016;32(11):879–884. doi: 10.1080/02670844.2016.1194511
   Web of Science ®Google Scholar
• Tredwin CJ. Sol-gel derived hydroxyapatite, fluorhydroxyapatite and fluorapatite coatings for titanium implants [Doctoral thesis]. London: University College London; 2009.
   Google Scholar
• Tredwin CJ, Young AM, Neel EAA, et al. Hydroxyapatite, fluor-hydroxyapatite and fluorapatite produced via the sol–gel method: dissolution behaviour and biological properties after crystallisation. J Mater Sci: Mater Med. 2014;25(1):47–53.
   PubMed Web of Science ®Google Scholar
• Ulum M, Arafat A, Noviana D, et al. In vitro and in vivo degradation evaluation of novel iron-bioceramic composites for bone implant applications. Mater Sci Eng: C. 2014;36:336–344. doi: 10.1016/j.msec.2013.12.022
   PubMed Web of Science ®Google Scholar
• Thair L, Ismaeel T, Ahmed B, et al. Development of apatite coatings on Ti–6Al–7Nb dental implants by biomimetic process and EPD: in vivo studies. Sur Eng. 2011;27(1):11–18. doi: 10.1179/174329409X439023
   Web of Science ®Google Scholar
• Panda R, Hsieh M, Chung R, et al. FTIR, XRD, SEM and solid state NMR investigations of carbonate-containing hydroxyapatite nano-particles synthesized by hydroxide-gel technique. J Phys Chem Solids. 2003;64(2):193–199. doi: 10.1016/S0022-3697(02)00257-3
   Web of Science ®Google Scholar
• Daculsi G, LeGeros RZ, Heughebaert M, et al. Formation of carbonate-apatite crystals after implantation of calcium phosphate ceramics. Calcified Tissue Int. 1990;46(1):20–27. doi: 10.1007/BF02555820
   PubMed Web of Science ®Google Scholar
• MerrHews A-n, Israel J. The decarbonation of carbonate-fluorapatite (francolite). Am Mineral. 1977;62:565–573.
   Web of Science ®Google Scholar
• Gineste L, Gineste M, Ranz X, et al. Degradation of hydroxylapatite, fluorapatite, and fluorhydroxyapatite coatings of dental implants in dogs. J Biomed Mater Res Part A. 1999;48(3):224–234. doi: 10.1002/(SICI)1097-4636(1999)48:3<224::AID-JBM5>3.0.CO;2-A
   Web of Science ®Google Scholar
• Chakraborty R, Seesala VS, Sen M, et al. MWCNT reinforced bone like calcium phosphate – hydroxyapatite composite coating developed through pulsed electrodeposition with varying amount of apatite phase and crystallinity to promote superior osteoconduction, cytocompatibility and corrosion protection performance compared to bare metallic implant surface. Surf Coat Technol. 2017;325:496–514. doi: 10.1016/j.surfcoat.2017.06.073
   Web of Science ®Google Scholar
• Bucher W, Madrid C. Dictionary of building preservation. New York (NY): Preservation Press, J. Wiley; 1996.
   Google Scholar