Laser cladding composite coating on mild steel using Ni–Cr–Ti–B₄C powder

References

• Li N, Li WY, Yang XW, et al. Effect of powder size on the long-term corrosion performance of pure aluminium coatings on mild steel by cold spraying. Mater Corros. 2017;68(5):546–551. doi: 10.1002/maco.201609199
   Web of Science ®Google Scholar
• Mourya P, Banerjee S, Singh MM. Corrosion inhibition of mild steel in acidic solution by Tagetes erecta (Marigold flower) extract as a green inhibitor. Corros Sci. 2014;85:352–363. doi: 10.1016/j.corsci.2014.04.036
   Web of Science ®Google Scholar
• Paydas H, Mertens A, Carrus R, et al. Laser cladding as repair technology for Ti–6Al–4V alloy: influence of building strategy on microstructure and hardness. Mater Design. 2015;85:497–510. doi: 10.1016/j.matdes.2015.07.035
   Web of Science ®Google Scholar
• Fernández MR, García A, Cuetos JM, et al. Effect of actual WC content on the reciprocating wear of a laser cladding NiCrBSi alloy reinforced with WC. Wear. 2015;324–325:80–89. doi: 10.1016/j.wear.2014.12.021
   Web of Science ®Google Scholar
• Tuominen J, Näkki J, Pajukoski H, et al. Microstructural and abrasion wear characteristics of laser-clad tool steel coatings. Surf Eng. 2016;32(12):923–933. doi: 10.1080/02670844.2016.1180496
   Web of Science ®Google Scholar
• Petronius I, Bamberger M. Microstructure and properties following welding of duplex stainless steel using coated electrodes. Sci Technol Weld Joi. 2001;6(2):79–83. doi: 10.1179/136217101101538569
   Web of Science ®Google Scholar
• Tolf E, Hedegård J, Melander A. Surface breaking cracks in resistance spot welds of dual phase steels with electrogalvanised and hot dip zinc coating. Sci Technol Weld Joi. 2013;18(1):25–31. doi: 10.1179/1362171812Y.0000000068
   Web of Science ®Google Scholar
• Maier CH, Lüftl S, Kozeschnik E. Study of molten metal droplet adhesion to organic anti-spatter coatings. Sci Technol Weld Joi. 2014;19(8):638–645. doi: 10.1179/1362171814Y.0000000237
   Web of Science ®Google Scholar
• Liu S, Zhou Y, Xing X, et al. Refining effect of TiC on primary M 7 C 3 in hypereutectic Fe Cr C harden-surface welding coating: experimental research and first-principles calculation. J Alloy Compd. 2017;691:239–249. doi: 10.1016/j.jallcom.2016.08.133
   Web of Science ®Google Scholar
• Farayibi PK, Abioye TE, Clare AT. A parametric study on laser cladding of Ti-6Al-4V wire and WC/W2C powder. Int J Adv Manuf Technol. 2016;87:3349–3358. doi: 10.1007/s00170-016-8743-9
   Web of Science ®Google Scholar
• Li M, Huang J, Zhu YY, et al. Effect of laser scanning speed on TiN/TiB-Ti based composite. Surf Eng. 2013;29(5):346–350. doi: 10.1179/1743294413Y.0000000114
   Web of Science ®Google Scholar
• Liu P, Zhang YB, Luo H. Surface modification of pure Ti with TiB2/Si3N4 reinforced coating. Surf Eng. 2012;28(7):532–535. doi: 10.1179/1743294412Y.0000000012
   Web of Science ®Google Scholar
• El-Labban HF, Mahmoud ERI, Algahtani A. Microstructure, wear, and corrosion characteristics of TiC-laser surface cladding on low-carbon steel. Metall Mater Trans B. 2016;47:974–982. doi: 10.1007/s11663-016-0602-4
   Web of Science ®Google Scholar
• Makarov AV, Soboleva NN, Malygina IY. Role of the strengthening phases in abrasive wear resistance of laser-clad NiCrBSi coatings. J Frict Wear. 2017;38(4):272–278. doi: 10.3103/S1068366617040080
   Web of Science ®Google Scholar
• Lin Y, Yao J, Lei Y, et al. Microstructure and properties of TiB 2–TiB reinforced titanium matrix composite coating by laser cladding. Opt Laser Eng. 2016;86:216–227. doi: 10.1016/j.optlaseng.2016.06.013
   Web of Science ®Google Scholar
• Zhang HX, Yu HJ, Chen CZ. In-situ forming composite coating by laser cladding C/B4C. Mater Manuf Process. 2015;30:743–747. doi: 10.1080/10426914.2014.994772
   Web of Science ®Google Scholar
• Sahu JK, Sahoo CK, Masanta M. In-Situ TiB2-TiC-Al2O3 composite coating on aluminum by laser surface modification. Mater Manuf Process. 2015;30:736–742. doi: 10.1080/10426914.2014.984225
   Web of Science ®Google Scholar
• Meng QW, Geng L, Zhang BY. Laser cladding of Ni-base composite coatings onto Ti-6Al-4 V substrates with pre-placed B4C + NiCrBSi powders. Surf Coat Technol. 2006;200:4923–4928. doi: 10.1016/j.surfcoat.2005.04.059
   Web of Science ®Google Scholar
• Bai LL, Li J, Chen JL, et al. Effect of the content of B4C on microstructural evolution and wear behaviors of the laser-clad coatings fabricated on Ti6Al4V. Opt Laser Technol. 2016;76:33–45. doi: 10.1016/j.optlastec.2015.07.010
   Web of Science ®Google Scholar
• Feng Z, Tang M, Liu Y, et al. In situ synthesis of TiC-TiN-reinforced Fe-base plasma cladding coatings. Surf Eng. doi:10.1080/02670844.2017.1349362.
   Web of Science ®Google Scholar
• Feng S-r, Tang H-b, Zhang S-q, et al. Microstructure and wear resistance of laser clad TiB-TiC/TiNi-Ti2Ni intermetallic coating on titanium alloy. Trans Nonferrous Met Soc China. 2012;22:1667–1673. doi: 10.1016/S1003-6326(11)61371-X
   Web of Science ®Google Scholar