The correlation between structure, multifunctional properties and applications of PVD MAX phase coatings. Part II. Texture and high-temperature properties

References

• Lippens BC, de Boer JH. Study of phase transformations during calcination of aluminum hydroxides by selected area diffraction. Acta Crystallogr. 1964;17:1312–1321.
   Web of Science ®Google Scholar
• Steiner CJ-P, Hasselman DPH, Spriggs RM. Kinetics of the gamma-to-alpha alumina phase transformation. J Am Ceram Soc. 1971;54(8):412–413.
   Web of Science ®Google Scholar
• Morrissey KJ, Czanderna KK, Carter CB. Growth of α-Al2O3 within a transition alumina matrix. J Am Ceram Soc. 1984;66(5):C-88–C-90.
   Google Scholar
• Wilson SJ, McConnell JD. A kinetic study of the system γ-AlOOH/Al2O3. J Solid State Chem. 1980;34:315–322.
   Web of Science ®Google Scholar
• Levi CG, Jayaram V, Valencia JJ, et al. Phase selection in electrohydrodynamic atomization of alumina. J Mater Res. 1988;3(5):969–983.
   Web of Science ®Google Scholar
• Polli AD, Lange FF, Levi CG, et al. Crystallization behavior and microstructure evolution of (Al,Fe)2O3 synthesized from liquid precursors. J Am Ceram Soc. 1996;79(7):1745–55.
   Web of Science ®Google Scholar
• Kumagai M, Messing GL. Controlled transformation and sintering of a boehmite sol–gel by α-alumina seeding. J Am Ceram Soc. 1985;68(9):500–505.
   Web of Science ®Google Scholar
• Wanke SE, Flynn PC. The sintering of supported metal catalysts. Catal Rev Sci Eng. 1975;12:93–135.
   Web of Science ®Google Scholar
• Evans AG, Mumm DR, Hutchinson JW, et al. Mechanisms controlling the durability of thermal barrier coatings. Prog Mater Sci. 2001;46(5):505–553.
   Web of Science ®Google Scholar
• Evans AG, Fleck NA, Faulhaber S, et al. Scaling laws governing the erosion and impact resistance of thermal barrier coatings. Wear. 2006;260:886–894.
   Web of Science ®Google Scholar
• Evans AG, Clarke DR, Levi CG. The influence of oxides on the performance of advanced gas turbines. J Eur Ceram Soc. 2008;28:1405–1419.
   Web of Science ®Google Scholar
• Clarke DR, Oechsner M, Padture NP. Thermal-barrier coatings for more efficient gas-turbine engines. MRS Bull. 2012;37:891–898.
   Web of Science ®Google Scholar
• Tolpygo VK, Clarke DR. Wrinkling of α-alumina films grown by oxidation – II. Oxide separation and failure. Acta Mater. 1998;46(14):5167–5174.
   Web of Science ®Google Scholar
• Tolpygo VK. The Morphology of thermally grown α-Al2O3 scales on Fe–Cr–Al alloys. Oxid Met. 1999;51(5):449–477.
   Web of Science ®Google Scholar
• Tolpygo VK, Clarke DR. Surface rumpling of a (Ni, Pt)Al bond coat induced by cyclic oxidation. Acta Mater. 2000;48:3283–3293.
   Web of Science ®Google Scholar
• Clarke DR, Christensen RJ, Tolpygo VK. The evolution of oxidation stresses in zirconia thermal barrier coated superalloy leading to spalting failure. Surf Coat Technol. 1997;94–95:89–93.
   Web of Science ®Google Scholar
• Brumm MW, Grabke HJ. The oxidation behavior of NiAl—I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl-Cr alloys. Corros Sci. 1992;33(11):1677–1690.
   Web of Science ®Google Scholar
• Levi CG, Sommer E, Terry SG, et al. Alumina grown during deposition of thermal barrier coatings on NiCrAlY. J Am Ceram Soc. 2002;86(4):676–685.
   Web of Science ®Google Scholar
• Rybicki GC, Smialek JL. Effect of the θ–α-Al2O3 transformation on the oxidation behavior of β-NiAl + Zr. Oxid Met. 1989;31(3–4):275–304.
   Web of Science ®Google Scholar
• Doychak J, Smialek JL, Mitchell TE. Transient oxidation of single crystal β-NiAl. Met Trans A. 1989;20(3):499–518.
   Web of Science ®Google Scholar
• Mennicke C, Mumm DR, Clarke DR. Transient phase evolution during oxidation of a two-phase NiCoCrAlY bond coat. Z Metall. 1999;90(12):1079–1084.
   Google Scholar
• Simpson TW, Wen Q, Yu N, et al. Kinetics of the amorphous → γ → α transformations in aluminum oxide: effect of crystallographic orientation. J Am Ceram Soc. 1998;81(1):61–66.
   Web of Science ®Google Scholar
• Yu N, Simpson TW, McIntyre PC, et al. Doping effects on the kinetics of solid-phase epitaxial growth of amorphous alumina thin films on sapphire. Appl Phys Lett. 1995;67(7):924–926.
   Web of Science ®Google Scholar
• Golightly FA, Stott FH, Wood GC. The relationship between oxide grain morphology and growth mechanisms for Fe–Cr–Al and Fe–Cr–Al–Y alloys. J Electrochem Soc. 1979;126(6):1035–1042.
   Web of Science ®Google Scholar
• Choquet P, Indrigo C, Mevrel R. Microstructure of oxide scales formed on cyclically oxidized M-Cr–AI–Y coatings. Mater Sci Eng. 1987;88:97–101.
   Google Scholar
• Huntz AM. Influence of active elements on the oxidation mechanism of M-Cr–Al alloys. Mater Sci Eng. 1987;87:251–260.
   Google Scholar
• Huntz AM. Effect of active elements on the oxidation behaviour of Al2O3-formers. In The Role of Active Elements in the Oxidation Behaviour of High Temperature Metals and Alloys, Proceedings of the European Colloquium organised by: Commission of the European Communities Directorate General: Science, Research and Development, edited by E. Lang, Barking, Essex: Elsevier Applied Science, 81–109; 1989.
   Google Scholar
• Choi SR, Tikare V. Crack healing behavior of hot pressed silicon nitride due to oxidation. Scr Metall Mater. 1992;26:1263–1268.
   Google Scholar
• Yao C, Qazi JI, Rack HJ, et al. Improved bone cell adhesion on ultrafine grained titanium and Ti– 6Al–4V. Ceramic Nanomaterials and Nanotechnology III, 106th Acers Transactions. 2004: 159.
   Google Scholar
• Ando K, Furusawa K, Chu MC, et al. Crack-healing behavior under stress of mullite/silicon carbide ceramics and the resultant fatigue strength. J Am Ceram Soc. 2001;84(9):2073–2078.
   Web of Science ®Google Scholar
• Ando K, Shirai Y, Nakatani M, et al. (Crack-healing + proof test): a new methodology to guarantee the structural integrity of a ceramics component. J Eur Ceram Soc. 2002;22(1):121–128.
   Web of Science ®Google Scholar
• Gupta TK. Crack healing and strengthening of thermally shocked alumina. J Am Ceram Soc. 1976;59(5-6):259–262.
   Web of Science ®Google Scholar
• Berger O, Boucher R, Ruhnow M. Part I. Mechanism of oxidation of Cr2AlC films in temperature range 700–1200°C. Surf Eng. 2015;31(5):373–385.
   Web of Science ®Google Scholar
• Berger O, Boucher R, Ruhnow M. Part II. Oxidation of yttrium doped Cr2AlC films in temperature range between 700–1200°C. Surf Eng. 2015;31(5):386–396.
   Web of Science ®Google Scholar
• Berger O, Leyens C, Heinze S, et al. Self-healing of yttrium-doped Cr2AlC MAX phase coatings deposited by HIPIMS, Fourth International Conference on Self-Healing Materials (ICSHM2013), 16–20 June 2013, Conference Proceedings, 319–323; 2013.
   Google Scholar
• Berger O, Boucher R. Crack healing in Y-doped Cr2AlC-MAX phase coatings. Surf Eng. 2017;33(3):192–203.
   Web of Science ®Google Scholar
• Barsoum MW, El-Raghy T, Ogbuji L. Oxidation of Ti3SiC2 in air. J Electrochem Soc. 1997;144:2508–2516.
   Web of Science ®Google Scholar
• Barsoum MW, Ho-Duc LH, Radovic M, et al. Long time oxidation study of Ti3SiC2, Ti3SiC2/SiC and Ti3SiC2/TiC composites in air. J Electrochem Soc. 2003;150:B166–B175.
   Web of Science ®Google Scholar
• Barsoum MW. MAX Phases: Properties of machinable carbides and nitrides. Weinheim: Wiley VCH GMbH; 2013.
   Google Scholar
• El-Raghy T, Barsoum MW. Processing and mechanical properties of Ti3SiC2: I, reaction path and microstructure evolution. J Am Ceram Soc. 1999;82(10):2849–2854.
   Web of Science ®Google Scholar
• Sun ZM, Zhou YC, Li MS. Oxidation behavior of Ti3SiC2-based ceramic at 900-1300°C in air. Corros Sci. 2001;43:1095–1109.
   Web of Science ®Google Scholar
• Sun Z, Zhou Y, Li M. High temperature oxidation behavior of Ti3SiC2-based material in air. Acta Mater. 2001;49:4347–4353.
   Web of Science ®Google Scholar
• Sun Z, Zhou Y, Li M. Cyclic-oxidation behavior of Ti3SiC2-base material at 1100°C. Oxid Met. 2002;57(5/6):379–394.
   Web of Science ®Google Scholar
• Sun ZM. Progress in research and development on MAX phases: a family of metallic ceramics. Int Mater Rev. 2011;56(3):143–166.
   Web of Science ®Google Scholar
• Radovic M, Barsoum MW, El-Raghy T, et al. Tensile creep of fine grained (3–5 μm) Ti3SiC2 in the 1000–1200°C temperature range. Acta Mater. 2001;49:4103–4112.
   Web of Science ®Google Scholar
• Racault C, Langlais F, Naslain R. Solid-state synthesis and characterization of the ternary phase Ti3SiC2. J Mater Sci. 1994;29:3384–3392.
   Web of Science ®Google Scholar
• Zhang HB, Zhou YC, Bao YW, et al. Oxidation behavior of bulk Ti3SiC2 at intermediate temperatures in dry air. J Mater Res. 2006;21:402–408.
   Web of Science ®Google Scholar
• Wang XH, Zhou YC. Oxidation behavior of Ti3AlC2 at 1000–1400°C in air. Corros Sci. 2003;45:891–907.
   Web of Science ®Google Scholar
• Qian X, He XD, Li YB, et al. Cyclic oxidation of Ti3AlC2 at 1000–1300°C in air. Corros Sci. 2011;53:290–295.
   Web of Science ®Google Scholar
• Lee DB, Park SW. High-temperature oxidation of Ti3AlC2 between 1173 and 1473 K in air. Mater Sci Eng A. 2006;434:147–154.
   Web of Science ®Google Scholar
• Xu L, Zhu D, Liu Y, et al. Effect of texture on oxidation resistance of Ti3AlC2. J Eur Ceram Soc. 2017;38(10):3417–3423.
   Web of Science ®Google Scholar
• Wang XH, Zhou YC. Microstructure and properties of Ti3AlC2 prepared by the solid–liquid reaction synthesis and simultaneous in-situ hot pressing process. Acta Mater. 2002;50:3143–3149.
   Web of Science ®Google Scholar
• Song GM, Schnabel V, Kwakernaak C, et al. High temperature oxidation behaviour of Ti2AlC ceramic at 1200°C. Mater High Temp. 2012;29:205–209.
   Web of Science ®Google Scholar
• Tallman DJ, Anasori B, Barsoum MW. A critical review of the oxidation of Ti2AlC, Ti3AlC2 and Cr2AlC in air. Mater Res Lett. 2013;1(3):115–125.
   Web of Science ®Google Scholar
• Wang XH, Li FZ, Chen JX, et al. Insights into high temperature oxidation of Al2O3- forming Ti3AlC2. Corros Sci. 2012;58:95–103.
   Web of Science ®Google Scholar
• Smialek JL. Oxygen diffusivity in alumina scales grown on Al-MAX phases. Corros Sci. 2015;91:281–286.
   Web of Science ®Google Scholar
• Smialek JL. Unusual oxidative limitations for Al-MAX phases, NASA/TM-2017-219444, Cleveland, OH, 1–29; 2017a.
   Google Scholar
• Song GM, Pei YT, Sloof WG, et al. Early stages of oxidation of Ti3AlC2 ceramics. Mater Chem Phys. 2008;112:762–768.
   Web of Science ®Google Scholar
• Song GM, Pei YT, Sloof WG, et al. Oxidation-induced crack healing in Ti3AlC2 ceramics. Scr Mater. 2008;58:13–16.
   Web of Science ®Google Scholar
• Tzenov NV, Barsoum MW. Synthesis and Characterization of Ti3AlC2. J Am Ceram Soc. 2000;83:825–832.
   Web of Science ®Google Scholar
• Bao YW, Hu CF, Zhou YC. Damage tolerance of nanolayer grained ceramics and quantitative estimation. Mater Sci Technol. 2006;22(2):227–230.
   Web of Science ®Google Scholar
• Zhou YC, Sun ZM, Wang XH, et al. Ab initio geometry optimization and ground state properties of layered ternary carbides Ti3MC2 (M = Al, Si and Ge). JPhys: Condens Matter. 2001;13:10001–10010.
   Web of Science ®Google Scholar
• Zhou YC, Wang XH, Sun ZM, et al. Electronic and structural properties of the layered ternary carbide Ti3AlC2. J Mater Chem. 2001;11:2335–2339.
   Web of Science ®Google Scholar
• Lide DR. Handbook of Chemistry and Physics. 76th ed. New York: CRC Press; 2000, 5–72.
   Google Scholar
• Lin ZJ, Zhou MJ, Zhou YC, et al. Microstructures and adhesion of the oxide scale formed on titanium aluminum carbide substrates. J Am Ceram Soc. 2006;89:2964–2966.
   Web of Science ®Google Scholar
• Barsoum M. Oxidation of Tin+1AlXn (n = 1–3 and X = C, N). I. Model. J Electrochem Soc. 2001;148(8):C544–C50.
   Web of Science ®Google Scholar
• Barsoum M, Tzenov N, Procopio A, et al. Oxidation of Tin+1AlXn (n = 1–3 and X = C, N). II. Experimental results. J Electrochem Soc. 2001;148(8):C551–C62.
   Web of Science ®Google Scholar
• Wang XH, Zhou YC. Intermediate-temperature oxidation behavior of Ti2AlC in air. J Mater Res. 2002;17(11):2974–2981.
   Web of Science ®Google Scholar
• Rao JC, Pei YT, Yang HJ, et al. TEM study of the initial oxide scales of Ti2AlC. J Acta Mater. 2011;59:5216–5223.
   Web of Science ®Google Scholar
• Yang HJ, Pei YT, Rao JC, et al. High temperature healing of Ti2AlC: On the origin of inhomogeneous oxide scale. Scr Mater. 2011;65:135–138.
   Web of Science ®Google Scholar
• Wang XH, Zhou YC. High-temperature oxidation behavior of Ti2AlC in air. Oxid Met. 2003;59:303–320.
   Web of Science ®Google Scholar
• Byeon JW, Liu J, Hopkins M, et al. Microstructure and residual stress of alumina scale formed on Ti2AlC at high temperature in air. Oxid Met. 2007;68:97–111.
   Web of Science ®Google Scholar
• Yang HJ, Pei YT, Rao JC, et al. Self-healing performance of Ti2AlC ceramic. J Mater Chem. 2012;22:8304–8313.
   Web of Science ®Google Scholar
• Basu S, Obando N, Gowdy A, et al. Long-term oxidation of Ti2AlC in air and water vapor at 1000–1300 °C temperature range. J Electrochem Soc. 2012;159:C90–C96.
   Web of Science ®Google Scholar
• Sundberg M, Malmqvist G, Magnusson A, et al. Alumina forming high temperature silicides and carbides. Ceram Int. 2004;30:1899–1904.
   Web of Science ®Google Scholar
• Wang XH, Zhou YC. Layered machinable and electrically conductive Ti2AlC and Ti3AlC2 ceramics: a review. J Mater Sci Technol. 2010;26:385–416.
   Web of Science ®Google Scholar
• Cui B, Jayaseelan DD, Lee WE. Microstructural evolution during high-temperature oxidation of Ti2AlC ceramics. Acta Mater. 2011;59:4116–4125.
   Web of Science ®Google Scholar
• Smialek JL. Kinetic aspects of Ti2AlC MAX phase oxidation. Oxid Met. 2015;83:351–366.
   Web of Science ®Google Scholar
• Smialek JL. Environmental resistance of a Ti2AlC-type MAX phase in a high pressure burner rig. J Eur Ceram Soc. 2017;37:23–34.
   Web of Science ®Google Scholar
• Sigumonrong DP, Zhang J, Zhou Y, et al. Synthesis and elastic properties of V2AlC thin films by magnetron sputtering from elemental targets. J Phys D: Appl Phys. 2009;42D:185408-1–185408-8.
   Google Scholar
• Wilhelmsson O, Palmquist J-P, Nyberg T, et al. Deposition of Ti2AlC and Ti3AlC2 epitaxial films by magnetron sputtering. Appl Phys Lett. 2004;85:1066–1068.
   Web of Science ®Google Scholar
• Schneider JM, Sigumonrong DP, Music D, et al. Elastic properties of Cr2AlC thin films probed by nanoindentation and ab initio molecular dynamics. Scr Mater. 2007;57:1137–1140.
   Web of Science ®Google Scholar
• Mockute A, Dahlqvist M, Hultman L, et al. Oxygen incorporation in Ti2AlC thin films studied by electron energy loss spectroscopy and ab initio calculations. J Mater Sci. 2013;48:3686–3691.
   Web of Science ®Google Scholar
• Rosén J, Persson POÅ, Ionescu M, et al. Oxygen incorporation in Ti2AlC thin films. Appl Phys Lett. 2008;92:064102.
   Web of Science ®Google Scholar
• Persson POÅ, Rosén J, McKenzie DR, et al. Formation of the MAX-phase oxycarbide Ti2AlC1−xOx studied via electron energy-loss spectroscopy and first-principles calculations. Phys Rev B: Condens Matter. 2009;80:092102.
   Web of Science ®Google Scholar
• Liao T, Wang JY, Zhou YC. First-principles investigation of intrinsic defects and (N, O) impurity atom stimulated Al vacancy in Ti2AlC. Appl Phys Lett. 2008;93:261911.
   Web of Science ®Google Scholar
• Liao T, Wang JY, Li MS, et al. First-principles study of oxygen incorporation and migration mechanisms in Ti2AlC. J Mater Res. 2009;24:3190–3196.
   Web of Science ®Google Scholar
• to Baben M, Shang L, Emmerlich J, et al. Oxygen incorporation in M2AlC (M = Ti, V, Cr). Acta Mater. 2012;60:4810–4818.
   Web of Science ®Google Scholar
• Lin ZJ, Zhou YC, Li MS, et al. In-situ hot pressing/solid–liquid reaction synthesis of bulk Cr2AlC. Z Metallkd. 2005;96:291–296.
   Google Scholar
• Lin ZJ, Li MS, Wang JY, et al. High-temperature oxidation and hot corrosion of Cr2AlC. Acta Mater. 2007;55(18):6182–6191.
   Web of Science ®Google Scholar
• Lee DB, Nguyen T, Han J, et al. Oxidation of Cr2AlC at 1300°C in air. Corros Sci. 2007;49(10):3926–3934.
   Web of Science ®Google Scholar
• Lee DB, Park S. Oxidation of Cr2AlC between 900 and 1200°C in air. Oxid Met. 2007;68(5–6):211–222.
   Web of Science ®Google Scholar
• Lee DB, Nguyen TD. Cyclic oxidation of Cr2AlC between 1000 and 1300°C in air. J Alloys Compd. 2008;464:434–439.
   Web of Science ®Google Scholar
• Lee DB, Nguyen T, Park S. Long-time oxidation of Cr2AlC between 700 and 1000°C in air. Oxid Met. 2012;77:275–287.
   Web of Science ®Google Scholar
• Tian WB, Wang PL, Kan YM, et al. Oxidation behaviour of Cr2AlC ceramics at 1100 and 1250°C. J Mater Sci. 2008;43:2785–2791.
   Web of Science ®Google Scholar
• Li JJ, Li MS, Xiang HM, et al. Short-term oxidation resistance and degradation of Cr2AlC coating on M38G superalloy at 900–1100°C. Corros Sci. 2011;53:3813–3820.
   Web of Science ®Google Scholar
• Yang HJ, Pei YT, De Hosson JTM. Oxide-scale growth on Cr2AlC ceramic and its consequence for self-healing. Scr Mater. 2013;69:203–206.
   Web of Science ®Google Scholar
• Wang J, Zhou Y, Liao T, et al. A first principles investigation of the phase stability of Ti2AlC with Al vacancies. Scr Mater. 2008;58:227–230.
   Web of Science ®Google Scholar
• Lin ZJ, Li MS, Wang JY, et al. Microstructure and high-temperature corrosion behavior of a Cr–Al–C composite. J Am Ceram Soc. 2007;90:3930–3937.
   Web of Science ®Google Scholar
• Li S, Chen X, Zhou Y, et al. Influence of grain size on high temperature oxidation behaviour of Cr2AlC ceramics. Ceram Int. 2012;32:2715–2721.
   Google Scholar
• Smialek JL. Universal characteristics of an interfacial spalling cyclic oxidation model. Acta Materialia. 2004;52:2111–2121.
   Web of Science ®Google Scholar
• Gonzalez-Julian J, Go T, Mack DE, et al. Environmental resistance of Cr2AlC MAX phase under thermal gradient loading using a burner rig. J Am Ceram Soc. 2018;101(5):1841–1846.
   Web of Science ®Google Scholar
• Hajas DE, to Baben M, Hallstedt B, et al. Oxidation of Cr2AlC coatings in the temperature range of 1230 to 1410°C. Surf Coat Technol. 2011;206:591–596.
   Web of Science ®Google Scholar
• Iskandar MR. Growth Mechanisms and Microstructure Evolution of MAX phases Thin Films and of Oxide Scales on High Temperature Materials, (Dissertation), Rheinisch-Westfälische Technische Hochschule Aachen (RWTH), Fakultät für Georessourcen and Materialtechnik, Aachen, 177; 2011.
   Google Scholar
• Wang QM, Renteria AF, Schroeter O, et al. Fabrication and oxidation behavior of Cr2AlC on Ti6242 alloy. Surf Coat Technol. 2010;204:2343–2352.
   Web of Science ®Google Scholar
• Wang QM, Mykhaylonka R, Renteria AF, et al. Improving the high-temperature oxidation resistance of a [beta]-[gamma] TiAl alloy by a Cr2AlC coating. Corros Sci. 2010;52(11):3793–3802.
   Web of Science ®Google Scholar
• Smialek JL, Garg A. Interfacial reactions of a MAX phase/superalloy hybrid. Surf Interface Anal. 2015;47:844–853.
   Web of Science ®Google Scholar
• Smialek JL. Oxidation of Al2O3 scale-forming MAX phases in turbine environments. Metall Mater Trans A. 2017. doi: 10.1007/s11661-017-4346-9
   Web of Science ®Google Scholar
• Smialek JL, Nesbitt JA, Gabb TP, et al. Hot corrosion and low cycle fatigue of a Cr2AlC-coated superalloy. Mater Sci Eng, A. 2018;711:119–129.
   Web of Science ®Google Scholar
• Berger O, Leyens C, Heinze S, et al. Characterisation of Cr–Al–C and Cr–Al–C–Y films synthesized by High Power Impulse Magnetron Sputtering at low deposition temperature. Thin Solid Films. 2015;580:6–11.
   Web of Science ®Google Scholar
• Crowell JE, Chen JG, Yates JT. Surface sensitive spectroscopic study of the interaction of oxygen with Al(111) – low temperature chemisorbtion and oxidation. Surf Sci. 1986;165:37–64.
   Web of Science ®Google Scholar
•  Khanna AS. Introduction to high temperature oxidation and corrosion. Materials Park (OH): ASM International; 2002; 71–86.
   Google Scholar
• Birks N, Meier GH, Pettit FS. Introduction to the high temperature of metals. 2nd ed. Cambridge: Cambridge University Press; 2006. 62–105.
   Google Scholar
• Li S, Chen X, Zhou Y, et al. Influence of grain size on high temperature oxidation bahavior of Cr2AlC. Ceram Int. 2013;39:2715–2721.
   Web of Science ®Google Scholar
• Wang J, Wang J, Zhou Y, et al. Phase stability, electronic structure and mechanical properties of ternary-layered carbide Nb4AlC3: An ab initio study. Acta Mater. 2008;56:1511–1518.
   Web of Science ®Google Scholar
• Wang JM, Wang JY, Zhou YC. Stable M2AlC (0001) surfaces (M=Ti, V and Cr) by first-principles investigation. J Phys: Condens Matter. 2008;20(4):225006–225017.
   Web of Science ®Google Scholar
• Dahlqvist M, Alling B, Abrikosov IA, et al. Phase stability of Ti2AlC upon oxygen incorporation: a first-principles investigation. Phys Rev B: Condens Matter. 2010;81B:024111-1–024111-8.
   Google Scholar
• Mo Y, Rulis P, Ching WY. Electronic structure and optical conductivities of 20 MAX-phase compounds. Phys Rev B: Condens Matter. 2012;86B:165122-1–165122-10.
   Google Scholar
• Li C, Wang Z, Wang C. Phase stability, mechanical properties and electronic structure of hexagonal and trigonal Ti5Al2C3, An ab initio study. Intermetallics. 2013;33:105–112.
   Web of Science ®Google Scholar
• Frodelius J, Lu J, Jensen J, et al. Phase stability and initial low-temperature oxidation mechanism of Ti2AlC thin films. J Eur Ceram Soc. 2013;33:375–382.
   Web of Science ®Google Scholar
• Sun Z, Li S, Ahuja R, et al. Calculated elastic properties of M2AlC (M=Ti, V, Cr, Nb and Ta). Solid State Commun. 2004;129:589–592.
   Web of Science ®Google Scholar
• Kanoun MB, Goumri-Said S, Reshak AH. Theoretical study of mechanical, electronical, chemical bonding and optical properties of Ti2SnC, Zr2SnC, Hf2SnC and Nb2SnC. Comput Mater Sci. 2009;47:491–600.
   Web of Science ®Google Scholar
• Bouhemadou A. Structural, electronic and elastic properties of MAX phases. Solid State Sci. 2009;11:1875–1881.
   Web of Science ®Google Scholar
• Bai Y, He X, Li M, et al. Ab initio study of the bonding and elastic properties of Ti2CdC. Solid State Sci. 2010;12:144–147.
   Web of Science ®Google Scholar
• Ghebouli MA, Ghebouli B, Fatmi M, et al. Theoretical prediction of the structural, elastic, electronic and thermal properties of the MAX phases X2SiC (X=Ti and Cr). Intermetallics. 2011;19:1936–1942.
   Web of Science ®Google Scholar
• Cui S, Feng W, Hu H, et al. First principle studies of the electronic and elastic properties of Ti2GeC. Solid State Commun. 2011;151:491–494.
   Web of Science ®Google Scholar
• Cui S, Wei D, Hu H, et al. First-principles study of the structural and elastic properties of Cr2AlX(X5N, C) compounds. J Solid State Chem. 2012;191:147–152.
   Web of Science ®Google Scholar
• Brik MG, Avram NM, Avram CN. Ab initio calculations of the electronic, structural and elastic properties of Nb2InC. Comp Mater Sci. 2012;63:227–231.
   Web of Science ®Google Scholar
• Ching W-Y, Mo Y, Aryal S, et al. Intrinsic mechanical properties of 20 MAX-phase compounds. J Am Ceram Soc. 2013;96:2292–2297.
   Web of Science ®Google Scholar
• Barsoum MW. The MN+1AXN phases: a new class of solids; thermodynamically stable nanolaminates. Prog Solid State Chem. 2000;28:201–281.
   Web of Science ®Google Scholar
• Palmquist J-P, Jansson U, Seppänen T, et al. Magnetron sputtered epitaxial single-phase Ti3SiC2 thin films. Appl Phys Lett. 2002;81:835–837.
   Web of Science ®Google Scholar
• Palmquist JP, Li S, Persson POÅ, et al. Mn+1 AXn phases in the Ti–Si–C system studied by thin-film synthesis and ab initio calculations. Phys Rev B: Condens Matter. 2004;70B:165401-1–165401-13.
   Google Scholar
• Emmerlich J, Högberg H, Sasvári S, et al. Growth of Ti3SiC2 thin films by elemental target magnetron sputtering. J Appl Phys. 2004;96:4817–4826.
   Web of Science ®Google Scholar
• Gulbinski W, Gilewicz A, Suszko T, et al. Ti–Si–C sputter deposited thin film coatings. Surf Coat Technol. 2004;180/181:341–346.
   Web of Science ®Google Scholar
• Schneider JM, Sun ZM, Mertens R, et al. Ab initio calculations and experimental determination of the structure of Cr2AlC. Solid State Commun. 2004;130:445–449.
   Web of Science ®Google Scholar
• Mertens R, Sun ZM, Music D, et al. Effect of the composition on the structure of Cr–Al–C investigated by combinatorial thin film synthesis and ab Initio calculations. Adv Eng Mater. 2004;6:903–907.
   Web of Science ®Google Scholar
• Wilhelmsson O, Palmquist J-P, Lewin E, et al. Deposition and characterization of ternary thin films within the Ti–Al–C system by DC magnetron sputtering. J Cryst Growth. 2006;291:290–300.
   Web of Science ®Google Scholar
• Högberg H, Hultman L, Emmerlich J, et al. Growth and characterization of MAX-phase thin films. Surf Coat Technol. 2005;193:6–10.
   Web of Science ®Google Scholar
• Walter C, Sigumonrong DP, EI-Raghy T, et al. Towards large area deposition of Cr2AlC on steel. Thin Solid Films. 2006;515:389–393.
   Web of Science ®Google Scholar
• Sun Z, Ahuja R. Ab initio study of the Cr2AlC(0001) surface. Appl Phys Lett. 2006;88:161913-1–161913-3.
   Web of Science ®Google Scholar
• Music D, Sun Z, Ahuja R, et al. Electronic structure of M2AlC (0001) surfaces (M=Ti, V, Cr). J Phys Condens Matter. 2006;18:8877–8881.
   Web of Science ®Google Scholar
• Music D, Sun Z, Ahuja R, et al. Surface energy of M2AC(0001) determined by density functional theory (M=Ti, V, Cr; A5Al, Ga, Ge). Surf Sci. 2007;601:896–899.
   Web of Science ®Google Scholar
• Li N, Sakidja R, Ching W-Y. Oxidation of Cr2AlC (0001): Insights from ab Initio calculations. JOM. 2013;65:1487–1491.
   Web of Science ®Google Scholar
• Batra IP, Kleinman L. Chemisorption of oxygen on aluminium. J Electron Spectrosc Relat Phenom. 1984;33:175–241.
   Web of Science ®Google Scholar
• O’Connor DJ, Wouters ER, van der Gon AWD, et al. Oxidation of Al(111). Surf Sci. 1993;287/288:438–442.
   Web of Science ®Google Scholar
• Zhukov V, Popova I, Yates JT. Initial stages of Al(111) oxidation with oxygen-temperature dependence of the integral reactive sticking coefficient. Surf Sci. 1999;441:251–264.
   Web of Science ®Google Scholar
• Brune H, Wintterlin J, Trost J, et al. Behm: “Interaction of oxygen with Al(111) studied by scanning tunneling microscopy. J Chem Phys. 1993;99:2128–2148.
   Web of Science ®Google Scholar
• Gartland PO. Adsorption of oxygen on clean single crystal faces of aluminium. Surf Sci. 1977;62:183–196.
   Web of Science ®Google Scholar
• McConville CF, Seymour DL, Woodruff DP, et al. Synchrotron radiation core level photoemission investigation of the initial stages of oxidation of Al(111). Surf Sci. 1987;188:1–14.
   Web of Science ®Google Scholar
• Trost J, Brune H, Wintterlin J, et al. Interaction of oxygen with Al(111) at elevated temperatures. J Chem Phys. 1998;108:1740–1747.
   Web of Science ®Google Scholar
• The interactive Ellingham diagram, University of Cambridge, Cambridge, UK. Available from http://www.doitpoms.ac.uk/tlplib/ Ellingham_diagrams/interactive.php.
   Google Scholar
• Bobzin K. Oberflächentechnik für den Maschinenbau. Weinheim: WILEY-VGH Verlag GmbH&Co.KGaA; 2013; 129.
   Google Scholar
• Kim Y, Hsu T. A Reflection Electron Microscopic (REM) Study of α-Al2O3 (0001) Surfaces. Surf Sci. 1991;258:131–146.
   Web of Science ®Google Scholar
• Shirai T, Watanabe H, Fuji M, et al. Structural properties and surface characteristics on aluminum oxide powders”, Ceramics Research Laboratory, Nagoya Institute of Technology, JAPAN, 9, 23–31; 2009.
   Google Scholar
• Peintinger MF, Kratz MJ, Bredow T. Quantum-chemical study of stable, meta-stable and high-pressure alumina polymorphs and aluminum hydroxides. J Mater Chem A. 2014;2:13143–13158.
   Web of Science ®Google Scholar
• Hahn T. International tables for crystallography. Volume A, Space-group symmetry. IUCr Series. Dordrecht: Springer; 2005. p. 1–911.
   Google Scholar
• Paglia G, Buckley CE, Udovic TJ, et al. Boehmite-Derived γ-Alumina System. 2. Consideration of Hydrogen and Surface Effects. Chem Mater. 2004;16:1914–1923.
   Web of Science ®Google Scholar
• Menendez-Proupin E, Gutierrez G. Electronic properties of bulk γ-Al2O3. Phys Rev B: Condens Matter Mater Phys. 2005;72:035116.
   Web of Science ®Google Scholar
• Ching W-Y, Ouyang L, Rulis P, et al. Ab initio study of the physical properties of γ−Al2O3: Lattice dynamics, bulk properties, electronic structure, bonding, optical properties, and ELNES/XANES spectra. Phys Rev B: Condens Matter Mater Phys. 2008;78:014106.
   Web of Science ®Google Scholar
• Paglia G, Buckley CE, Rohl AL, et al. Tetragonal structure model for boehmite-derived γ-alumina. Phys Rev B: Condens Matter Mater Phys. 2003;68:144110.
   Web of Science ®Google Scholar
• John CS, Alma VCM, Hays GR. Characterization of transition alumina by solid-state magic angle spinning aluminum NMR. Appl Catal. 1983;6:341–46.
   Google Scholar
• Oshi Y, Kingery WD. Self-diffusion of oxygen in single crystal and polycrystalline aluminum oxide. J Chem Phys. 1960;33(2):480–486.
   Web of Science ®Google Scholar
• Paladino AE, Kingery WD. Aluminum ion diffusion in aluminum oxide. J Chem Phys. 1962;37(5):957–962.
   Web of Science ®Google Scholar
• White CW, Boatner LA, Sklad PS, et al. Ion implantation and annealing of crystalline oxides and ceramic materials. Nucl Instrum Methods Phys Res, Sect B. 1988;32:11–22.
   Web of Science ®Google Scholar
• Gitzen WH. Alumina as ceramic material. Ohio: The American Ceramic Society; 1970. 103–106.
   Google Scholar
• Tien J, Pettit F. Mechanism of oxide adherence on Fe–25Cr–4Al (Y or Sc) alloys. Metall Mater Trans B. 1972;3B:1587–1599.
   Web of Science ®Google Scholar
• Golightly FA, Stott FH, Wood GC. The influence of scale adhesion alloy yttrium additions on the oxide to an iron-chromium-aluminum oxidation of metals. Oxid Met. 1976;10(3):163–186.
   Web of Science ®Google Scholar
• Stott FH, Wood GC. Growth and adhesion of oxide scales on Al2O3-forming alloys and coatings. Mater Sci Eng. 1987;87:267–274.
   Google Scholar
• Pint BA. Experimental observations in support of the dynamic segregation theory to explain the reactive-element effect. Oxid Met. 1996;45(1/2):1–37.
   Web of Science ®Google Scholar
• Pint BA, Garratt-Reed AJ, Hobbs LW. Possible role of the oxygen potential gradient in enhancing diffusion of foreign ions on α-Al2O3 grain boundaries. J Am Ceram Soc. 1998;81:305–314.
   Web of Science ®Google Scholar
• Pint BA. Optimization of reactive-element additions to improve oxidation performance of alumina-forming alloys. J Am Ceram Soc. 2003;86(4):686–695.
   Web of Science ®Google Scholar
• Christensen RJ, Tolpygo VK, Clarke DR. The influence of the reactive element yttrium on the stress in alumina scales formed by oxidation. Acta Mater. 1997;45:1761–1766.
   Web of Science ®Google Scholar
• Xu CH, Gao W, Gong H. Oxidation behaviour of FeAl intermetallics. The effects of Y and/or Zr on isothermal oxidation kinetics. Intermetallics. 2000;8(7):769–779.
   Web of Science ®Google Scholar
• Cueff R, Buscail H, Caudron E, et al. Oxidation of alumina formers at 1173 K: effect of yttrium ion implantation and yttrium alloying addition. Corros Sci. 2003;45(8):1815–1831.
   Web of Science ®Google Scholar
• Peng X, Wang F. Morphologic investigation and growth of the alumina scale on magnetron-sputtered CoCrAlNCs with and without yttrium. Corros Sci. 2003;45:2293–2306.
   Web of Science ®Google Scholar
• Rovere F, Mayrhofer PH, Reinholdt A, et al. The effect of yttrium incorporation on the oxidation resistance of Cr–Al–N coatings. Surf Coat Technol. 2008;202:5870–5875.
   Web of Science ®Google Scholar
• Grabke HJ. Oxidation of NiAl and FeAl. Intermetallics. 1999;7(10):1153–1158.
   Web of Science ®Google Scholar
• Boucher R, Berger O, Leyens C. Magnetic properties of bulk and thin film Cr–Al–C compounds. Surf Eng. 2016;32(3):172–177.
   Web of Science ®Google Scholar
• Boucher R, Berger O. Magnetic model of oxidation process of Y containing Cr–Al–C films. Surf Eng. 2018;34(1):6–13.
   Web of Science ®Google Scholar
• Prot D, Le Gall M, Lesage B, et al. Self-diffusion in α-Al2O3. IV. Oxygen grain-boundary self-diffusion in undoped and yttria-doped alumina polycrystals. Philos Mag A. 1996;73(4):935–949.
   Web of Science ®Google Scholar
• Schroeter O. Herstellung und Charakterisierung von PVD-Schichten auf Basis der Cr2AlC–MAX-Phase, (Dissertation), Brandenburgische Technische Universität Cottbus (BTU), Fakultät für Maschinenbau, Elektrotechnik und Wirtschaftsingenieurwesen, Cottbus, 278; 2011.
   Google Scholar
• Smialek JL, Garg A. Microstructure and Oxidation of a MAX Phase/Superalloy Hybrid Interface. NASA/TM, 2014, 216679.
   Google Scholar
• Foner S. High-field antiferromagnetic resonance in Cr2O3. Phys Rev. 1963;130(183):183–197.
   Web of Science ®Google Scholar
• Yang SH, Liu SJ, Hua ZH, et al. Magnetic properties of Al2O3–Cr2O3 solid solutions. J Alloys Compd. 2011;509:6946–6949.
   Web of Science ®Google Scholar
• Leslie-Pelecky DL. Magnetic properties of nanostructured materials. Chem Mater. 1996;8:1770–1783.
   Web of Science ®Google Scholar
• Heuer AH, Lagerlof KPD. Oxygen self-diffusion in corundum (alpha-Al2O3): A conundrum. Philos Mag Lett. 1999;79(8):619–627.
   Web of Science ®Google Scholar
• Heuer AH. Oxygen and aluminum diffusion in α-Al2O3: How much do we really understand? J Eur Ceram Soc. 2008;28:1495–1507.
   Web of Science ®Google Scholar
• Venkatesan M, Fitzgerald CB, Coey JMD. Unexpected magnetism in a dielectric oxide. Nature. 2004;430:630.
   PubMed Web of Science ®Google Scholar
• Coey JMD, Venkatesan M, Stamenov P, et al. Magnetism in hafnium dioxide. Phys Rev B: Condens Matter. 2005;72:024450.
   Web of Science ®Google Scholar
• Coey DJM. d0 ferromagnetism. Solid State Sci. 2005;7:660–667.
   Web of Science ®Google Scholar
• Hong NH, Sakai J, Poirot N, et al. Room-temperature ferromagnetism observed in undoped semiconducting and insulating oxide thin films. Phys Rev. 2006;B 73:132404.
   Web of Science ®Google Scholar
• Sun S, Wu P, Xing P. Effect of vacuum-annealing on the d0 ferromagnetism of undoped In2O3 films. J Magn Magn Mater. 2012;324:2932–2935.
   Web of Science ®Google Scholar
• Yoon SD, Chen Y, Yang A, et al. Oxygen-defect-induced magnetism to 880 K in semiconducting anatase TiO2−δ films. J Phys: Condens Matter. 2006;18:L355.
   Web of Science ®Google Scholar
• Elfimov IS, Yunoki S, Sawatzky GA. Possible path to a new class of ferromagnetic and half-metallic ferromagnetic materials”. Phys Rev Lett. 2002;89:216403.
   PubMed Web of Science ®Google Scholar
• Osorio-Guillén J, Lany S, Barabash SV, et al. Magnetism without magnetic ions: percolation, exchange and formation energies of magnetism-promoting intrinsic defects in CaO. Phys Rev Lett. 2006;96:107203.
   PubMed Web of Science ®Google Scholar
• Chanier T, Opahle I, Sargolzaei M, et al. Magnetic state around cation vacancies in II–VI semiconductors. Phys Rev Lett. 2008;100:026405.
   PubMed Web of Science ®Google Scholar
• von Oertzen GU, Gerson AR. O deficiency in the rutile TiO2 (110) surface: Ab initio quantum chemical investigation of the electronic properties. Int J Quantum Chem. 2006;106(9):2054–2064.
   Web of Science ®Google Scholar
• Krüger P, Bourgeois S, Domenichini B, et al. Defect states at the TiO2(110) surface probed by resonant photoelectron diffraction. Phys Rev Lett. 2008;100:055501.
   PubMed Web of Science ®Google Scholar
• Ganguly A, Zhen T, Barsoum MW. Synthesis and mechanical properties of Ti3GeC2 and Ti3(SixGe1-x)C2 (x=0.5, 0.75) solid solutions. J Alloy Compd. 2004;376:287–295.
   Web of Science ®Google Scholar
• Hu C, He L, Zhang J, et al. Microstructure and properties of bulk Ta2AlC ceramic synthesised by an in situ reaction/hot pressing method. J Eur Ceram Soc. 2008;28:1679–1685.
   Web of Science ®Google Scholar
• Gat N, Tabakoff W. Some effects of temperature on the erosion of metals. Wear. 1978;50:85–94.
   Web of Science ®Google Scholar
• Levy A, Yan J, Paterson J. Elevated temperature erosion of steels. Wear. 1986;108:43–60.
   Web of Science ®Google Scholar
• Levy A, Man YF. Surface degradation of ductile metals in elevated temperature gas-particle streams. Wear. 1986;111:173–186.
   Web of Science ®Google Scholar
• Rogers PM, Howes TE, Hutchings IM, et al. Wastage of low alloy steels in a fluidized bed environment. Wear. 1995;186–187:306–315.
   Web of Science ®Google Scholar
• Howes TE, Rogers PM, Hutchings IM, et al. Erosion-corrosion of mild steel in a temperature gradient. Wear. 1995;186–187:316–324.
   Web of Science ®Google Scholar
• Suckling M, Allen C. Critical variables in high temperature erosive wear. Wear. 1997;203–204:528–536.
   Web of Science ®Google Scholar
• Stephenson DJ, Nicholls JR, Hancock P. Particle-surface interactions during the erosion of a gas turbine material (MarM002) by pyrolytic carbon particles. Wear. 1986;111:15–29.
   Web of Science ®Google Scholar
• Stephenson DJ, Nicholls JR, Hancock P. Particle-surface interactions during the erosion of aluminide-coated MarM002. Wear. 1986;111:31–39.
   Web of Science ®Google Scholar
• Hancock P, Nicholls JR, Stephenson DJ. The mechanism of high temperature erosion of coated superalloys. Surf Coat Technol. 1987;32:285–304.
   Web of Science ®Google Scholar
• Tabakoff W. Investigation of coatings at high temperature for use in turbomachinery. Surf Coat Technol. 1989;39/40:97–115.
   Web of Science ®Google Scholar
• Tabakoff W, Shanov V. Erosion rate testing at high temperature for turbomachinery use. Surf Coat Technol. 1995;76–77(Part 1):75–80.
   Web of Science ®Google Scholar
• Tabakoff W. Erosion resistance of superalloys and different coatings exposed to particulate flows at high temperature. Surf Coat Technol. 1999;120–121:542–547.
   Web of Science ®Google Scholar
• Rogers PM, Hutchings IM, Little AJ. Coatings and surface treatments for protection against low-velocity erosion-corrosion in fluidized beds. Wear. 1995;186–187:238–246.
   Web of Science ®Google Scholar
• Chinnadurai S, Bahadur S. High-temperature erosion of Haynes and Waspaloy: effect of temperature and erosion mechanisms. Wear. 1995;186–187:299–305.
   Web of Science ®Google Scholar
• Stack MM, Song-Roehrle Q, Stott FH, et al. Computer simulation of erosion-corrosion interactions at elevated temperatures. Wear. 1995;181–183:516–523.
   Web of Science ®Google Scholar
• Stack MM, Chacon-Nava J, Stott FH. Relationship between the effects of velocity and alloy corrosion resistance in erosion-corrosion environments at elevated temperatures. Wear. 1995;180:91–99.
   Web of Science ®Google Scholar
• Stack MM, Pena D. Particle size effects on the elevated temperature erosion behaviour of Ni–Cr/WC MMC-based coatings”. Surf Coat Technol. 1999;113:5–12.
   Web of Science ®Google Scholar
• Howard RL, Ball A. The effect of test temperature on the particle erosion performance of titanium aluminide alloys. Wear. 1997;205:11–14.
   Web of Science ®Google Scholar
• Lange FF, Radford KC. Healing of surface cracks in polycrystalline Al2O3. J Am Ceram Soc. 1970;53(7):420–421.
   Web of Science ®Google Scholar
• Zhou JR, Bahadur S. Erosion characteristics of alumina ceramics at high temperatures. Wear. 1995;181–183:178–188.
   Web of Science ®Google Scholar
• Franco A, Roberts SG. The effect of impact angle on the erosion rate of polycrystalline α-Al2O3. J Eur Ceram Soc. 1998;18:269–274.
   Web of Science ®Google Scholar
• Ham AL, Yeomans JA, Watts JF. Effect of temperature and particle velocity on the erosion of a silicon carbide continuous fibre reinforced calcium aluminosilicate glass–ceramic matrix composite. Wear. 1999;233–235:237–245.
   Web of Science ®Google Scholar
• Hall PW, Swinnea JS, Kovar D. Fracture resistance of highly textured alumina. J Am Ceram Soc. 2001;84(7):1514–1520.
   Web of Science ®Google Scholar
• Stephenson DJ, Nicholls JR. Modelling the influence of surface oxidation on high temperature erosion wear. Wear. 1995;186–187:284–290.
   Web of Science ®Google Scholar
• Wellman RG, Nicholls JR. Some observations on erosion mechanisms of EB PVD TBCS. Wear. 2000;242:89–96.
   Web of Science ®Google Scholar
• Wellman RG, Nicholls JR. High temperature erosion–oxidation mechanisms, maps and models. Wear. 2004;256(9–10):907–917.
   Web of Science ®Google Scholar
• Chen X, Wang R, Yao N, et al. Foreign object damage in a thermal barrier system: mechanisms and simulations. Mater Sci Eng A. 2003;352:221–231.
   Web of Science ®Google Scholar
• Chen X, He MY, Spitsberg I, et al. Mechanisms governing the high temperature erosion of thermal barrier coatings. Wear. 2004;256:735–746.
   Web of Science ®Google Scholar
• Tabakoff W, Wakeman T. Test facility for material erosion at high temperature. American Society for Testing and Materials. 1979;(Special Publication 664):123–135.
   Google Scholar
• Stephenson DJ, Nicholls JR. Modelling erosive wear. Corros Sci. 1993;35:1015–1026.
   Web of Science ®Google Scholar
• Markworth AJ, Nagarajan V, Wright IG. An approach to modeling simultaneous high-temperature oxidation and erosion. Oxid Met. 1991;35(1–2):89–106.
   Web of Science ®Google Scholar
• Markworth AJ. A stochastic model for the simultaneous occurrence of oxidation and erosion. Mater Sci Eng A. 1992;150:37–41.
   Web of Science ®Google Scholar
• Stack MM, Stott FH. An approach to modelling erosion–corrosion of alloys using erosion-corrosion maps. Corros Sci. 1993;35:1027–1034.
   Web of Science ®Google Scholar
• Nicholls JR, Stephenson DJ. Monte Carlo modelling of erosion processes. Wear. 1995;186–187:64–77.
   Web of Science ®Google Scholar
• Stack MM, Pena D. Mapping erosion of Ni–Cr/WC-based composites at elevated temperatures: some recent advances. Wear. 2001;251:1433–1443.
   Web of Science ®Google Scholar
• Kang CT, Pettit FS, Birks N. Mechanisms in the simultaneous erosion-oxidation attack of nickel and cobalt at high temperature. Metall Mater Trans A. 1987;18(10):1785–1803.
   Web of Science ®Google Scholar
• Wright IG, Sethi VK, Markworth AJ. A generalized description of the simultaneous processes of scale growth by high-temperature oxidation and removal by erosive impact. Wear. 1995;186–187:230–237.
   Web of Science ®Google Scholar
• Roy M, Ray KK, Sundararajan G. Erosion-oxidation interaction in Ni and Ni-20Cr alloy. Metall Mater Trans A. 2001;32(6):1431–1451.
   Web of Science ®Google Scholar
• Rishel DM, Pettit FS, Birks N. Spalling types and mechanisms in the erosion corrosion of metals at high temperature. Corros Sci. 1993;35:1007–1011.
   Web of Science ®Google Scholar
• Iwasa M, Bradt RC. Fracture toughness of single-crystal alumina. In: Kingery WD, editor. Advances in ceramics, vol. 10. Columbus, OH: American Ceramics Society; 1984. p. 767–779.
   Google Scholar
• Hutchings IM. Ductile-brittle transitions and wear maps for the erosion and abrasion of brittle materials. J Phys D: Appl Phys. 1992;25(1A):A212.
   Web of Science ®Google Scholar
• Hutchings IM. Transitions, threshold effects and erosion maps. Key Eng Mater. 1992;71:75–92.
   Google Scholar
• Salem JA, Shannon JL, Bradt RC. Crack growth resistance of textured alumina. J Am Ceram Soc. 1989;72(1):20–27.
   Web of Science ®Google Scholar
• Wiederhorn SM. Fracture of sapphire. J Am Ceram Soc. 1969;52:485–491.
   Web of Science ®Google Scholar
• Inkinson BJ. Dislocations and twinning activated by the abrasion of Al2O3. Acta Mater. 2000;48:1883–1895.
   Web of Science ®Google Scholar
• Carisey T, Laugier-Werth A, Brandon DG. Control of texture in Al2O3 by gel-casting. J Eur Ceram Soc. 1995;15(1):1–8.
   Web of Science ®Google Scholar
• Seabaugh MM, Kerscht IH, Messing GL. Texture development by templated grain growth in liquid-phase-sintered α-Alumina. J Am Ceram Soc. 1997;80(5):1181–1188.
   Web of Science ®Google Scholar
• Hirao K, Ohashi M, Brito ME, et al. Processing strategy for producing highly anisotropic silicon nitride. J Am Ceram Soc. 1995;78(6):1687–1690.
   Web of Science ®Google Scholar
• Sacks MD, Scheiffele GW, Staab GA. Fabrication of textured silicon carbide via seeded anisotropic grain growth. J Am Ceram Soc. 1996;79(6):1611–1616.
   Web of Science ®Google Scholar
• Brandt RC, Scott WD. Mechanical properties of alumina, in Alumina. Am Ceram Soc. 1990;73:23–39.
   Web of Science ®Google Scholar
• Mitchell TE. Application of transmission electron microscopy to the study of deformation in ceramic oxides. J Am Ceram Soc. 1979;62(5–6):254–267.
   Web of Science ®Google Scholar
• Gupta S, Filimonov D, Zaitsev V, et al. Ambient and 550°C tribological behavior of select MAX phases against Ni-based superalloys. Wear. 2008;264:270–278.
   Web of Science ®Google Scholar
• Gupta S, Filimonov D, Palanisamy T, et al. Tribological behaviour of select MAX phases against Al2O3 at elevated temperatures. Wear. 2008;265:560–565.
   Web of Science ®Google Scholar
• van der Zwaag S. Self-healing materials. An alternative approach to 20 centuries of materials science Springer series in materials science 100, The Netherlands: Springer, 385; 2007.
   Google Scholar
• Greil P. Generic principles of crack-healing ceramics. J Adv Ceram. 2012;1(4):249–267.
   Web of Science ®Google Scholar
• Min XM, Ren Y. Electronic structures and bonding properties of Ti2AlC and Ti3AlC2. J Wuhan Univ Technol. 2007;22:27–30.
   Web of Science ®Google Scholar
• Li S, Song G, Kwakernaak K, et al. Multiple crack healing of a Ti2AlC ceramic. J Eur Ceram Soc. 2012;32:1813–1820.
   Web of Science ®Google Scholar
• Li SB, Xiao LO, Song GM, et al. Oxidation and crack healing behavior of a fine-grained Cr2AlC ceramic. J Am Ceram Soc. 2013;96(3):892–899.
   Web of Science ®Google Scholar
• Shen L, Eichner D, van der Zwaag S, et al. Reducing the erosive wear rate of Cr2AlC MAX phase ceramic by oxidative healing of local impact damage. Wear. 2016;358-359:1–6.
   Web of Science ®Google Scholar
• Sheldon GL, Finnie I. On the ductile behaviour of nominally brittle materials during erosive cutting. J Manuf Sci Eng. 1966;88(4):387–392.
   Google Scholar
• Lawn BR, Evans AG, Marshall DB. Elastic/plastic indentation damage in ceramics: the median crack system. J Am Ceram Soc. 1980;63(9–10):574–581.
   Web of Science ®Google Scholar
• Srinivasan S, Scattergood RO. Effect of erodent hardness on erosion of brittle materials. Wear. 1988;128:139–152.
   Web of Science ®Google Scholar
• Lawn BR, Deng Y, Marinda P, et al. Overview: Damage in brittle layer structures from concentrated loads. J Mater Res. 2002;17(12):3019–3036.
   Web of Science ®Google Scholar
• Lawn BR. Fracture and deformation in brittle solids: A perspective on the issue of scale. J Mater Res. 2004;19(1):22–29.
   Web of Science ®Google Scholar
• Lawn BR, Swain MV. Microfracture beneath point indentations in brittle solids. J Mater Sci. 1975;10(1):113–122.
   Web of Science ®Google Scholar
• Anstis GR, Chantikul P, Lawn BR, et al. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements. J Am Ceram Soc 1981;64(9):533–538.
   Web of Science ®Google Scholar
• Braun LM, Bennison SJ, Lawn BR. Objective evaluation of short crack toughness curves using indentation flaws: case study on alumina-based ceramics. J Am Ceram Soc. 1992;75(11):3049–3057.
   Web of Science ®Google Scholar
• Molina-Aldareguia JM, Emmerlich J, Palmquist J-P, et al. Kink formation around indents in laminated Ti3SiC2 thin films studied in the nanoscale. Scr Mater. 2003;49:155–160.
   Web of Science ®Google Scholar
• Wang XH, Zhou YC. Hot corrosion of Na2SO4-coated Ti3AlC2 in air at 700-1000°C. J Electrochem Soc. 2004;151(9):B505.
   Web of Science ®Google Scholar
• Lin Z, Zhou Y, Li M, et al. Hot corrosion and protection of Ti2AlC against Na2SO4 salt in air. J Eur Ceram Soc. 2006;26(16):3871.
   Web of Science ®Google Scholar
• Liu GM, Li MS, Zhou YC. Hot corrosion of Ti3SiC2-based ceramics coated with Na2SO4 at 900 and 1000°C in air. Corros Sci. 2003;45:1217–1226.
   Web of Science ®Google Scholar
• Liu GM, Li MS, Zhou YC. Effect of Na2SO4 and water vapor on the corrosion of Ti3SiC2. Oxid Met. 2006;66:115–125.
   Web of Science ®Google Scholar
• Aw LM, Amendola R, Ryter JW, et al. Investigation of Na2SO4 deposit induced corrosion of Cr, Al, C binary and ternary thin film coatings on Ni-201. J Electrochem Soc. 2017;164(6):C218–223.
   Web of Science ®Google Scholar