https://orcid.org/0000-0003-3797-4282
References
- Patel PJ, Patel JM. Wear mechanics and surface engineering for wear resistance. Int J Adv Eng Res Dev. 2014;1(2):1–4.
- Kurdowski W. Mineral additions for cement production. Cem Concr Chem. Deordrecht: Springer; 2014. p. 21–44.
- KenchiReddy KM, Jayadeva CT. The effect of microstructure on 3 Body abrasive wear behavior of hardfacing alloys. Bonfring Int J Ind Eng Manag Sci. 2014;4(1):14–23.
- Banerji A, Edrisy A, Francis V, et al. Effect of bio-fuel (E85) addition on lubricated sliding wear mechanisms of a eutectic Al–Si alloy. Wear. 2014;311:1–13. doi: 10.1016/j.wear.2013.12.011
- Trezona R, Allsopp D, Hutchings I. Transitions between two-body and three-body abrasive wear: influence of test conditions in the microscale abrasive wear test. Wear. 1999;225:205–214. doi: 10.1016/S0043-1648(98)00358-5
- Budinski KG, Budinski ST. On replacing three-body abrasion testing with two-body abrasion testing. Wear. 2017;376:1859–1865. doi: 10.1016/j.wear.2017.01.001
- Fouad Y, Ibrahim KM, Okolo B. Wear mitigation in magnesium alloy AZ80 processed by equal channel angular pressing. Int J Eng Res Afr. 2011;6:1–11. doi: 10.4028/www.scientific.net/JERA.6.1
- Mang T, Bobzin K, Bartels T. Tribological materials. Industrial tribology: tribosystems, friction, wear and surface engineering, lubrication. USA: John Wiley & Sons; 2011. p. 49–111.
- Stachowiak GW, Batchelor AW. Hydrostatic lubrication. Engineering tribology. Oxford, UK: Butterworth-Heinemann; 2013. p. 261–285.
- Hutchings I, Shipway P. Wear by hard particles. Tribology: friction and wear of engineering materials. Oxford, UK: Butterworth-Heinemann; 2013. p. 165–236.
- Heino V, Valtonen K, Kivikytö-Reponen P, et al. Characterization of the effects of embedded quartz layer on wear rates in abrasive wear. Wear. 2013;308:174–179. doi: 10.1016/j.wear.2013.06.019
- Kennedy D, Hashmi M. Methods of wear testing for advanced surface coatings and bulk materials. J Mater Process Technol. 1998;77(1–3):246–253. doi: 10.1016/S0924-0136(97)00424-X
- Long M, Rack H. Friction and surface behavior of selected titanium alloys during reciprocating-sliding motion. Wear. 2001;249(1–2):157–167. doi: 10.1016/S0043-1648(01)00517-8
- Doğan ÖN, Hawk J, Tylczak J. Wear of cast chromium steels with TiC reinforcement. Wear. 2001;250(1–12):462–469. doi: 10.1016/S0043-1648(01)00635-4
- Rahman S, Sabnis M, Kuusisto LM, et al. Models for organics removal from vinasse from ethanol production. Clean Techn Environ Policy. 2018;20(4):803–812. doi: 10.1007/s10098-018-1496-4
- Winkelmann H, Badisch E, Kirchgaßner M, et al. Wear mechanisms at high temperatures. Part 1: wear mechanisms of different Fe-based alloys at elevated temperatures. Tribol Lett. 2009;34(3):155–166. doi: 10.1007/s11249-009-9421-y
- American Society for Testing and Materials (ASTM). Standard test method for measuring Abrasion using the Dry Sand/Rubber Wheel Apparatus. West Conshohocken: ASTM; 2016. Standard No. ASTM G65-16e1.
- American Society for Testing and Materials (ASTM). Standard specification for carbon structural steel. West Conshohocken: ASTM; 2014. Standard No. ASTM A36 / A36M-14.