Combination of electrophoretic and electroless depositions to fabricate Ni/TiC cladding

References

• Huang ZH, XZhou YJ, Nguyen TT. Study of nickel matrix composite coatings deposited from electroless plating bath loaded with TiB2, ZrB2 and TiC particles for improved wear and corrosion resistance. Surf Coat Tech. 2019;364:323–329. doi: 10.1016/j.surfcoat.2019.01.060
   Web of Science ®Google Scholar
• Tabatabaei F, Raeissi K, Saatchi A, et al. Effect of heat treatment on tribocorrosion of nanostructure Ni-P coatings. Surf Eng. 2013;29:671–676. doi: 10.1179/1743294413Y.0000000175
   Web of Science ®Google Scholar
• Gawne DT, Ma U. Structure and wear of electroless nickel coatings. Mater Sci Tech. 1987;3:228–238. doi: 10.1179/mst.1987.3.3.228
   Web of Science ®Google Scholar
• Qian Y, Tianfeng Z, Yonggang J, et al. Preparation of graphene-enhanced nickel-phosphorus compositefilms by ultrasonic-assisted electroless plating. App Surf Sci. 2018;435:617–625. doi: 10.1016/j.apsusc.2017.11.169
   Web of Science ®Google Scholar
• Czagany M, Baumli P. Effect of surfactants on the behavior of the Ni-P bath and on the formation of electroless Ni-P-TiC composite coatings. Surf Coat Tech. 2019;361:42–49. doi: 10.1016/j.surfcoat.2019.01.046
   Web of Science ®Google Scholar
• Chandrasekar P, Natarajan S, Ramkumar K. Influence of carbide reinforcements on accululative roll bonded Al 8011 composites. Mater Manuf Process. 2019;34:1–9. doi: 10.1080/10426914.2019.1594279
   Web of Science ®Google Scholar
• Dehao K, Xiaoqing Z, Yingwu W, et al. Microstructure and thermal decomposition property of Ni-P/Cr2N composite powder by electroless plating. Adv Powder Technol. 2018;29:1433–1438. doi: 10.1016/j.apt.2018.03.005
   Web of Science ®Google Scholar
• Cheng YH, Zou Y, Cheng L, et al. Effect of complexing agents on properties of electroless Ni–P deposits. Mater Sci Tech. 2008;24:457–460. doi: 10.1179/174328408X281886
   Web of Science ®Google Scholar
• Stankiewicz A, Kefallinou Z, Mordarski G, et al. Surface functionalisation by the introduction of self-healing properties into electroless Ni-P coatings. Electrochim Acta. 2019;297:427–434. doi: 10.1016/j.electacta.2018.12.026
   Web of Science ®Google Scholar
• Kundu S, Kalyan S, Prasanta S. Friction and wear behavior of electroless Ni-P-W coating exposed to elevated temperature. Surf Interface. 2019;14:192–207. doi: 10.1016/j.surfin.2018.12.007
   Web of Science ®Google Scholar
• MacLean M, Farhat Z, Jarjoura G, et al. Fabrication and investigation of the scratch and indentation behaviour of new generation Ni-P-nano-NiTi composite coating for oil and gas pipelines. Wear. 2019;426–427:265–276. doi: 10.1016/j.wear.2019.01.058
   Web of Science ®Google Scholar
• Wang S, Huang X, Gong M, et al. Microstructure and mechanical properties of Ni-P-Si3N4 nanowireelectroless composite coatings. App Surf Sci. 2015;357:328–332. doi: 10.1016/j.apsusc.2015.09.011
   Web of Science ®Google Scholar
• Afroukhteh S, Dehghanian C, Emamy M. Preparation of the Ni–P composite coating co-deposited by nano TiC particles and evaluation of its corrosion property. App Surf Sci. 2012;258:2597–2601. doi: 10.1016/j.apsusc.2011.10.101
   Web of Science ®Google Scholar
• Besra L, Liu M. A review on fundamental and applications of electrophoretic deposition. Prog Mater Sci. 2007;57:1–61. doi: 10.1016/j.pmatsci.2006.07.001
   Web of Science ®Google Scholar
• Ammam M. Electrophoretic deposition under modulated electric fields: a review. RSC. 2012;20:7633–7646.
   Google Scholar
• Khuntia S, Pani B, Nayak S. Fabrication of composites from different carbon content ferrous powders adopting thermomechanical processes. Mater Manuf Process. 2019;34:1–7. doi: 10.1080/10426914.2019.1594251
   Web of Science ®Google Scholar
• German R. Sintering: from empirical observations to scientific principles. 1st ed. Elsevier; 2014.
   Google Scholar
• Gorji MR, Edtmaier C, Sanjabi S. Synthesis of Ni/TiC composite coating by infiltration sintering of electrophoretic deposited layers. Mater Des. 2017;125:167–179. doi: 10.1016/j.matdes.2017.04.002
   Web of Science ®Google Scholar
• Han T, Xiao M, Zhang Y, et al. Laser cladding composite coatings by Ni-Cr-Ti-B4C with different process parameters. Mater Manuf Process. 2019;34:1–9. doi: 10.1080/10426914.2018.1512115
   Web of Science ®Google Scholar
• Pirso J, Viljus M, Letunovits S. Friction and dry sliding wear behavior of cermets. Wear. 2006;260:815–824. doi: 10.1016/j.wear.2005.04.006
   Web of Science ®Google Scholar