Thermal treatment and deposition of alumina in metallic microchannels

References

• Jensen KF. Microreaction engineering—is small better? Chem Eng Sci. 2001;56:293–303. doi: 10.1016/S0009-2509(00)00230-X
   Web of Science ®Google Scholar
• Suryawanshi PL, Gumfekar SP, Bhanvase BA, et al. A review on microreactors: reactor fabrication, design, and cutting-edge applications. Chem Eng Sci. 2018;189:431–448. doi: 10.1016/j.ces.2018.03.026
   Web of Science ®Google Scholar
• Fanelli F, Parisi G, Degennaro L, et al. Contribution of microreactor technology and flow chemistry to the development of green and sustainable synthesis. Beilstein J Org Chem. 2017;13:520–542. doi: 10.3762/bjoc.13.51
   PubMed Web of Science ®Google Scholar
• Yao X, Zhang Y, Du L, et al. Review of the applications of microreactors. Renew Sust Energ Rev. 2015;47:519–539. doi: 10.1016/j.rser.2015.03.078
   Web of Science ®Google Scholar
• Tanimu A, Jaenicke S, Alhooshani K. Heterogeneous catalysis in continuous flow microreactors: a review of methods and applications. Chem Eng J. 2017;327:792–821. doi: 10.1016/j.cej.2017.06.161
   Web of Science ®Google Scholar
• Wohlgemuth R, Plazl I, Polona ZP, et al. Microscale technology and biocatalytic processes: opportunities and challenges for synthesis. Trends Biotechnol. 2015;33:302–314. doi: 10.1016/j.tibtech.2015.02.010
   PubMed Web of Science ®Google Scholar
• Shang M, Noël T, Su Y, et al. Kinetic study of hydrogen peroxide decomposition at high temperatures and concentrations in two capillary microreactors. AIChE J. 2017;63:689–697. doi: 10.1002/aic.15385
   Web of Science ®Google Scholar
• Jensen KF. Flow chemistry – microreaction technology comes of age. AIChE J. 2017;63:858–859. doi: 10.1002/aic.15642
   Web of Science ®Google Scholar
• Almeida LC, Echave FJ, Sanz O, et al. Washcoating of metallic monoliths and microchannel reactors. Stud Surf Sci Catal. 2010;175:25–33. doi: 10.1016/S0167-2991(10)75004-7
   Google Scholar
• Agrafiotis C, Tsetsekou A, Stournaras CJ, et al. Evaluation of sol-gel methods for the synthesis of doped-ceria environmental catalysis systems. Part I: preparation of coatings. J Eur Ceramic Soc. 2002;22:15–25. doi: 10.1016/S0955-2219(01)00246-1
   Web of Science ®Google Scholar
• Peela NR, Mubayi A, Kunzru D. Washcoating of g-alumina on stainless steel microchannels. Catal Today. 2009;147S:S17–S23. doi: 10.1016/j.cattod.2009.07.026
   Web of Science ®Google Scholar
• Avila P, Montes M, Miró EE. Monolithic reactors for environmental applications: a review on preparation technologies. Chem Eng J. 2005;109:11–36. doi: 10.1016/j.cej.2005.02.025
   Web of Science ®Google Scholar
• Entezary B, Kazemeini M. Improved H2 production from the APR of polyols in a microreactor utilizing Pt supported on a CeO2-Al2O3 structured catalyst. Inter J Hyd Ener. 2018;43:21777–21790. doi: 10.1016/j.ijhydene.2018.09.207
   Web of Science ®Google Scholar
• Che Y, Zhang C, Wu R, et al. Methanol steam reforming in microreactor with constructal tree-shaped network. J Power Sour 2011;196:6366–6373. doi: 10.1016/j.jpowsour.2011.03.044
   Web of Science ®Google Scholar
• Szákalos. Mechanisms of metal dusting. Estocolmo: Royal Institute of Technology; 2004. ISBN 91-7283-713-6.
   Google Scholar
• Zahl Albertsen J. Metallografiske undersö kelseravhög-temperatur korrosions reaktioner i ulike nikkel baserte legeringar [diploma thesis]. NTNU, Trondheim; 2003.
   Google Scholar
• Rouaix-Vande Put A, Unocic KA, Brady MP, et al. Performance of chromia- and alumina-forming Fe- and Ni-base alloys exposed to metal dusting environments: the effect of water vapor and temperature. Corros Sci. 2015;92:58–68. doi: 10.1016/j.corsci.2014.11.022
   Web of Science ®Google Scholar
• Oyarzún DP, Linarez Pérez OE, López Teijelo M, et al. Atomic force microscopy (AFM) and 3D confocal microscopy as alternative techniques for the morphological characterization of anodic TiO2 nanoporous layers. Mater Lett. 2016;165:67–70. doi: 10.1016/j.matlet.2015.11.087
   Web of Science ®Google Scholar
• Zamaro JM, Ulla MA, Miró EE. Improvement in the catalytic performance of in-mordenite through preferential growth on metallic monoliths. Appl Catal A. 2006;308:161–171. doi: 10.1016/j.apcata.2006.04.008
   Web of Science ®Google Scholar
• Liu G, Gao X, He Q, et al. Green preparation of silver coating on AISI 304 stainless steel surface by Ag nanocrystalline in-situ growth and the wear resistance. Appl Surf Sci. 2018;456:457–463. doi: 10.1016/j.apsusc.2018.06.146
   Web of Science ®Google Scholar
• Durán F, Barbero B, Cadús L. Preparation of MnOx/AISI 304 austenitic stainless steel monoliths for catalytic combustion of ethyl acetate. Catal Lett. 2011;141:1786–1795. doi: 10.1007/s10562-011-0716-x
   Web of Science ®Google Scholar
• Asteman H, Svensson J-E, Norell M, et al. Influence of water vapor and flow rate on the high-temperature oxidation of 304L; effect of chromium oxide hydroxide evaporation. Oxidat Met. 2000;54:11–26. doi: 10.1023/A:1004642310974
   Web of Science ®Google Scholar
• Asteman H, Svensson J-E, Johansson L-G, et al. Indication of chromium oxide hydroxide evaporation during oxidation of 304L at 873 K in the presence of 10% water vapor. Oxidat Metals. 1999;52:95–111. doi: 10.1023/A:1018875024306
   Web of Science ®Google Scholar
• Thiele M, Teichmann H, Schwarz W, et al. Corrosion behaviour of ferritic and austenitic steels in simulated flue gases from bituminous and brown coal-fired power stations. VGB Kraftwerkste. 1997;77(2):135–140.
   Google Scholar
• Sachitanand R, Sattari M, Svensson J-E, et al. Evaluation of the oxidation and Cr evaporation properties of selected FeCr alloys used as SOFC interconnects. Int J Hydrog Energy. 2013;38:15328–15334. doi: 10.1016/j.ijhydene.2013.09.044
   Web of Science ®Google Scholar
• Panas I, Svensson JE, Asteman H, et al. Chromic acid evaporation upon exposure of Cr2O3(s) to H2O (g) and O2 (g) – mechanism from first principles. Chem Phys Lett. 2004;383(5):549–554. doi: 10.1016/j.cplett.2003.11.079
   Web of Science ®Google Scholar
• Laguna OH, Domínguez MI, Centeno MA. Forced deactivation and postmortem characterization of a metallic microchannel reactor employed for the preferential oxidation of CO(PROX). Chem Eng J. 2016;302:650–662. doi: 10.1016/j.cej.2016.05.104
   Web of Science ®Google Scholar
• Koski K, Hölsä J, Juliet P. Deposition of aluminium oxide thin films by reactive magnetron sputtering. Surf Coat Tech. 1999;116-119:716–720. doi: 10.1016/S0257-8972(99)00087-0
   Web of Science ®Google Scholar
• Szkodo M, Gajowiec G. Studies of the mechanism of metal dusting of 10CrMo9-10 steel after 10 years of operation in the semi-regenerative catalytic reformer. Corros Sci. 2016;102:279–290. doi: 10.1016/j.corsci.2015.10.016
   Web of Science ®Google Scholar
• Villegas L, Masset F, Guilhaume N. Wet impregnation of alumina-washcoated monoliths: effect of the drying procedure on Ni distribution and on autothermal reforming activity. Appl Catal A. 2007;320:43–55. doi: 10.1016/j.apcata.2006.12.011
   Web of Science ®Google Scholar
• Brinker CJ, Scherer GW. Sol-gel science, the physics and chemistry of sol-gel processing. Academic Press; 1990. ISBN: 0-12-134970-5.
   Google Scholar
• Kasprzyk-Hordern B. Chemistry of alumina, reactions in aqueous solution and its application in water treatment. Adv Colloid Inter Sci. 2004;110:19–48. doi: 10.1016/j.cis.2004.02.002
   PubMed Web of Science ®Google Scholar
• Ying X, Zhang L, Xu H, et al. An experimental study on a microchannel reactor for Fischer Tropsch synthesis. Ener Proc. 2014;61:1394–1397. doi: 10.1016/j.egypro.2014.12.134
   Google Scholar
• Valentini M, Groppi G, Cristiani C, et al. The deposition of γ-Al2O3 layers on ceramic and metallic supports for the preparation of structured catalysts. Catal Today. 2001;69:307–314. doi: 10.1016/S0920-5861(01)00383-2
   Web of Science ®Google Scholar
• Morterra C, Magnacca G. A case study: surface chemistry and surface structure of catalytic aluminas, as studied by vibrational spectroscopy of adsorbed species. Catal Today. 1996;27:497–532. doi: 10.1016/0920-5861(95)00163-8
   Web of Science ®Google Scholar
• Peri JB. Infrared and gravimetric study of the surface hydration of γ-alumina. J Phys Chem. 1965;69:211–219. doi: 10.1021/j100885a032
   Web of Science ®Google Scholar
• Hadjiivanov K. Chapter two – identification and characterization of surface hydroxyl groups by infrared spectroscopy. Adv Catal. 2014;57:99–318.
   Web of Science ®Google Scholar
• Juan-Juan J, Roman-Martínez MC, Illán-Goméz MC. Effect of potassium content in the activity of K-promoted Ni/Al2O3 catalysts for the dry reforming of methane. Appl Catal A. 2005;301(1):9–15. doi: 10.1016/j.apcata.2005.11.006
   Web of Science ®Google Scholar