Anti-corrosion properties of NiCr amorphous coatings sprayed by magnetron sputtering

References

• Lai LF, Su XS, Fu XZ, et al. The microstructure and properties of C and W co-doped NiCr embedded thin film resistors. Surf Coat Tech. 2014;259:759–766. doi: 10.1016/j.surfcoat.2014.09.039
   Web of Science ®Google Scholar
• Lai L, Zeng W, Fu X, et al. Annealing effect on the electrical properties and microstructure of embedded Ni-Cr thin film resistor. J Alloy Compd. 2012;538(10):125–130. doi: 10.1016/j.jallcom.2012.05.102
   Web of Science ®Google Scholar
• Yong K, Kim NH, Choi DY, et al. Micro structure and surface characteristics of NiCr thin films prepared by DC magnetron sputter according to annealing conditions. J Korean Inst Electr Electron Mater Eng. 2005;18(6):554–559.
   Google Scholar
• Kumar M, Singh H, Singh N, et al. Development of nano-crystalline cold sprayed Ni-20Cr coatings for high temperature oxidation resistance. Surf Coat Tech. 2015;266(3):122–133. doi: 10.1016/j.surfcoat.2015.02.032
   Web of Science ®Google Scholar
• Singh H, Sidhu TS, Kalsi SBS, et al. Evolution of the microstructure by high velocity impacts of particles by cold spray. Adv Manuf Process. 2014;31(11):1514–1520. doi: 10.1080/10426914.2014.994766
   Web of Science ®Google Scholar
• Eom TH, Han JI. The effect of the nickel and chromium concentration ratio on the temperature coefficient of the resistance of a Ni-Cr thin film-based temperature sensor. Sensor Actuat A Phys. 2017;260:198–205. doi: 10.1016/j.sna.2017.04.024
   Web of Science ®Google Scholar
• Kumar M, Singh H, Singh N. Study of Ni-20Cr coatings for high temperature applications-a review. Arch Metall Mater. 2013;58(2):523–528. doi: 10.2478/amm-2013-0030
   Web of Science ®Google Scholar
• Ak NF, Çelik E, Çetinel H, et al. Corrosive wear behaviours of HVOF-sprayed NiCr coatings on stainless steel substrates. Key Eng Mater. 2004;264-268:529–532. doi: 10.4028/www.scientific.net/KEM.264-268.529
   Google Scholar
• Sun J, Du DX, Lv HF, et al. Microstructure and corrosion resistance of pulse electrodeposited Ni-Cr coatings. Surf Eng. 2014;31(6):406–411. doi: 10.1179/1743294414Y.0000000392
   Web of Science ®Google Scholar
• Zhang LM, Zhang SD, Ma AL, et al. Influence of sealing treatment on the corrosion behavior of HVAF sprayed Al-based amorphous/nanocrystalline coating. Surf Coat Tech. 2018;353:263–273. doi: 10.1016/j.surfcoat.2018.08.086
   Web of Science ®Google Scholar
• Weng F, Yu H, Chen C, et al. Influence of Nb and Y on hot corrosion behavior of Ni-Cr-based superalloys. Mater Manuf Process. 2015;30(5):677–684. doi: 10.1080/10426914.2014.994770
   Web of Science ®Google Scholar
• Matthews S, James B, Hyland M. Erosion of oxide scales formed on CrC-NiCr thermal spray coatings. Corros Sci. 2008;50(11):3087–3094. doi: 10.1016/j.corsci.2008.08.032
   Web of Science ®Google Scholar
• Sidhu TS, Prakash S, Agrawal RD. Hot corrosion studies of HVOF sprayed Cr3C2-NiCr and Ni-20Cr coatings on nickel-based superalloy at 900°C. Surf Coat Tech. 2006;201(3):792–800. doi: 10.1016/j.surfcoat.2005.12.030
   Web of Science ®Google Scholar
• Dutta RS, Singh K, Vishwanadh B, et al. Aluminide formation on alloy 800 by plasma spraying and heat treatment. Mater Manuf Process. 2017;32(16):1–6. doi: 10.1080/10426914.2017.1317794
   Web of Science ®Google Scholar
• Ghosh D, Mitra SK. Plasma sprayed Cr3C2-Ni-Cr coating for oxidation protection of 2·25Cr-1Mo steel. Surf Eng. 2014;31(5):342–348. doi: 10.1179/1743294414Y.0000000336
   Web of Science ®Google Scholar
• Velumani S, Castaneda H, Pal U, et al. Structural and electrochemical characterization of sputter-deposited nitrided NiCr alloys. J Solid State Electr. 2005;9(8):535–546. doi: 10.1007/s10008-004-0587-9
   Web of Science ®Google Scholar
• Zhang JF, Liu M, Song JB. Microstructure and corrosion behavior of Fe-based amorphous coating prepared by HVOF. J Alloy Compd. 2017;721:506–511. doi: 10.1016/j.jallcom.2017.06.046
   Web of Science ®Google Scholar
• Velasco SC, Cavaleiro A, Carvalho S. Functional properties of ceramic-Ag nanocomposite coatings produced by magnetron sputtering. Prog Mater Sci. 2016;84:158–191. doi: 10.1016/j.pmatsci.2016.09.005
   Web of Science ®Google Scholar
• Danışman M, Cansever N. Effect of Cr content on mechanical and electrical properties of Ni-Cr thin films. J Alloy Compd. 2010;493(1-2):649–653. doi: 10.1016/j.jallcom.2009.12.180
   Web of Science ®Google Scholar
• Jing S, Bai Y, Qin F, et al. Bias effects on AlMgB thin films prepared by magnetron sputtering. Surf Eng. 2017;33(8):592–596. doi: 10.1080/02670844.2016.1143213
   Web of Science ®Google Scholar
• Lai L, Wang J, Wang H, et al. Structures and properties of C-doped NiCr thin film deposited by closed-field unbalanced magnetron sputtering. J Electron Mater. 2016;46(1):1–11.
   Web of Science ®Google Scholar
• Tavoosi M, Barahimi A. Corrosion behavior of amorphous-nanocrystalline Fe-Ni-Cr electrodeposited coatings. Surf Interface. 2017;8:103–111. doi: 10.1016/j.surfin.2017.05.004
   Web of Science ®Google Scholar
• Feng LP, Liu ZT. Thin film technology and application. Shan Xi: Northwestern Polytechnical University Press; 2016.
   Google Scholar
• Morks MF, Berndt CC. Corrosion and oxidation properties of NiCr coatings sprayed in presence of gas shroud system. Appl Surf Sci. 2010;256(13):4322–4327. doi: 10.1016/j.apsusc.2010.02.024
   Web of Science ®Google Scholar
• Sadeghimeresht E, Markocsan N, Nylén P, et al. Corrosion performance of bi-layer Ni/Cr2C3-NiCr HVAF thermal spray coating. Appl Surf Sci. 2016;369:470–481. doi: 10.1016/j.apsusc.2016.02.002
   Web of Science ®Google Scholar
• Amudha A, Shashikala HD, Nagaraja HS. Corrosion behaviour and characterization of thermal sprayed coating of nickel chromium cermet on low carbon steel. Mater Today Proc. 2018;5:16100–16105. doi: 10.1016/j.matpr.2018.05.093
   Google Scholar
• Qin YJ, Wu YP, Zhang JF, et al. Long-term corrosion behavior of HVOF sprayed FeCrSiBMn amorphous/nanocrystalline coating. T Nonferr Metal Soc. 2015;25(4):1144–1150. doi: 10.1016/S1003-6326(15)63709-8
   Web of Science ®Google Scholar