References
- Zhou X, Ouyang C. Anodized porous titanium coated with Ni-CeO2 deposits for enhancing surface toughness and wear resistance. Appl Surf Sci. 2017;405:476–488.
- Guo PY, Lai YB, Shao Y, et al. Oxidation characteristics and electrical properties of doped Mn-Co spinel reaction layer for solid oxide fuel cell metal interconnects. Coatings. 2018;8(1):11.
- Zhang WH, Cao D, Qiao YX, et al. Preparation and properties of duplex Ni-P-TiO2/Ni nanocomposite coatings. Int J Mod Phys B. 2019;33(1-3):8.
- Wang YX, Cao D, Gao WD, et al. Microstructure and properties of sol-enhanced Co-P-TiO2 nano-composite coatings. J Alloys Compd. 2019;792:617–625.
- Sudagar J, Lian J, Sha W. Electroless nickel, alloy, composite and nano coatings - a critical review. J Alloys Compd. 2013;571:183–204.
- Shan LM, Li YL, Miao JG, et al. Improvement of anti-corrosive and anti-oxidative properties of electroless Ni-P coating. Surf Eng. 2019;35(10):833–840.
- Qian W, Wei H, Chen H, et al. The effect of heat treatment on Ni-B-Ce electroless coatings. Surf Eng. 2019;35(2):145–153.
- Shu X, Wang Y, Liu C, et al. Microstructure and properties of Ni-B-TiO2 nano-composite coatings fabricated by electroless plating. Mater Technol. 2015;30(A1):A41–A45.
- Sahoo P, Das SK. Tribology of electroless nickel coatings - a review. Mater Des. 2011;32(4):1760–1775.
- AlZahrani A, Alhamed Y, Petrov L, et al. Mechanical and corrosion behavior of amorphous and crystalline electroless Ni-W-P coatings. J Solid State Electrochem. 2014;18(7):1951–1961.
- Balaraju JN, Selvi VE, Grips VKW, et al. Electrochemical studies on electroless ternary and quaternary Ni-P based alloys. Electrochim Acta. 2006;52(3):1064–1074.
- Hamdy AS, Shoeib MA, Hady H, et al. Corrosion behavior of electroless Ni-P alloy coatings containing tungsten or nano-scattered alumina composite in 3.5% NaCl solution. Surf Coat Technol. 2007;202(1):162–171.
- Vitry V, Delaunois F, Dumortier C. Mechanical properties and scratch test resistance of nickel-boron coated aluminium alloy after heat treatments. Surf Coat Technol. 2008;202(14):3316–3324.
- Delaunois F, Lienard P. Heat treatments for electroless nickel-boron plating on aluminium alloys. Surf Coat Technol. 2002;160(2-3):239–248.
- Song JY, Yu J. Residual stress measurements in electroless plated Ni-P films. Thin Solid Films. 2002;415(1-2):167–172.
- Cheong WJ, Luan BL, Shoesmith DW. The effects of stabilizers on the bath stability of electroless Ni deposition and the deposit. Appl Surf Sci. 2004;229(1-4):282–300.
- Lee KJ, Nash P. Alloy phase diagrams. Novelty (OH): ASM Alloy Phase Diagrams Center; 1991.
- Farber B, Cadel E, Menand A, et al. Phosphorus segregation in nanocrystalline Ni-3.6 at.-% P alloy investigated with the tomographic atom probe (TAP). Acta Mater. 2000;48(3):789–796.
- Liao PK, Spear KE. Alloy phase diagrams. Novelty (OH): ASM Alloy Phase Diagrams Center; 1991.
- Correa E, Zuleta AA, Guerra L, et al. Tribological behavior of electroless Ni-B coatings on magnesium and AZ91D alloy. Wear. 2013;305(1-2):115–123.