Improving hot corrosion resistance of Cr₃C₂–20NiCr coatings with CNT reinforcements

References

• Keyvani A, Bahamirian M. Hot corrosion and mechanical properties of nanostructured Al2O3/CSZ composite TBCs. Surf Eng. 2017;33:433–443. doi: 10.1080/02670844.2016.1267423
   Web of Science ®Google Scholar
• Singh G, Goyal K, Bhatia R. Hot corrosion studies of plasma-sprayed chromium oxide coatings on boiler tube steel at 850 C in simulated boiler environment. Iran J Sci Tech: Trans Mech Eng. 2018;42:149–159.
   Web of Science ®Google Scholar
• Jiang C, Liu W, Wang G, et al. The corrosion behaviours of plasma-sprayed Fe-based amorphous coatings. Surf Eng. 2018;34:634–639. doi: 10.1080/02670844.2017.1319647
   Web of Science ®Google Scholar
• Goyal K, Singh H, Bhatia R. Behaviour of carbon nanotubes-Cr2O3 thermal barrier coatings in actual boiler. Surf Eng. 2019: 1–11. https://doi.org/10.1080/02670844.2019.1584966 doi: 10.1080/02670844.2019.1662645
   Web of Science ®Google Scholar
• Goyal K, Sidhu VPS, Goyal R. Hot corrosion study of high velocity oxy-fuel (HVOF) sprayed coatings on boiler tube steel in actual coal fired boiler. Pak J Sci Ind Res A: Phy Sci. 2018;61:149–155.
   Google Scholar
• Prakash S, Tewari V, Kumar R. Characterization of hot corrosion behavior of different regions of Tungsten Inert Gas Weldment in ASTM SA 210 GrA1 Boiler Tube Steel. Mater Perf Charater. 2018;7:414–422.
   Web of Science ®Google Scholar
• Brindley WJ. Thermal barrier coatings. J Therm Spray Technol. 1996;5:379–380. doi: 10.1007/BF02645266
   Web of Science ®Google Scholar
• Wielage B, Hofmann U, Steinhauser S, et al. Improving wear and corrosion resistance of thermal sprayed coatings. Surf Eng. 1998;14:136–138. doi: 10.1179/sur.1998.14.2.136
   Google Scholar
• Memmi IT. Ceramic coatings in ancient times: high technology surface modification technologies. Surf Eng. 2013;29:84–97. doi: 10.1179/1743294412Y.0000000078
   Web of Science ®Google Scholar
• Anderson A. Corrosion resistance of ceramic coatings sprayed on stainless steel substrates. Int J Amb Ener. 2017;38:320–322. doi: 10.1080/01430750.2015.1086679
   Web of Science ®Google Scholar
• Pawlowski L. The science and engineering of thermal spray coatings. Hoboken (NJ): John Wiley; 2008.
   Google Scholar
• Fukanuma H. A porosity formation and flattening model of an impinging molten particle in thermal spray coatings. J Therm Spray Technol. 1994;3:33–44. doi: 10.1007/BF02648997
   Web of Science ®Google Scholar
• Kaur M, Singh H, Prakash S. Role of detonation gun spray Cr3C2–NiCr coating in improving high temperature corrosion resistance of SAE–213–T22 and SAE–347H steel in presence of Na2SO4–82% Fe2 (SO4) 3 salt deposits. Surf Eng. 2010;26:428–439. doi: 10.1179/026708409X12490360425963
   Web of Science ®Google Scholar
• Chatha SS, Sidhu HS, Sidhu BS. Characterisation and corrosion-erosion behaviour of carbide based thermal spray coatings. J Min Mater Charater Eng. 2012;11:569.
   Google Scholar
• Bengtsson P, Johannesson T. Characterization of microstructural defects in plasma-sprayed thermal barrier coatings. J Therm Spray Technol. 1995;4:245–251. doi: 10.1007/BF02646967
   Web of Science ®Google Scholar
• Wang F, Geng S. High temperature oxidation and corrosion resistant nanocrystalline coatings. Surf Eng. 2003;19:32–36. doi: 10.1179/026708402225010056
   Web of Science ®Google Scholar
• Dussing M, Yang H, Topping TD, et al. Microstructure and mechanical behavior of Cryomilled Al–Mg composites reinforced with nanometric yttria partially stabilized zirconia. Cham: Springer; 2018.
   Google Scholar
• Suib SL. A review of nanoceramic materials for use in ceramic matrix composites. Sol-gel based nanoceramic materials: preparation, properties and applications. Cham: Springer; 2017. p. 185–230.
   Google Scholar
• Martin R, Vick M, Enneti RK, et al. Sintering characteristics of a powder injection molded ceria-stabilized zirconia–mullite composite. Mater Manuf Pro. 2015;30:616–623. doi: 10.1080/10426914.2014.941871
   Web of Science ®Google Scholar
• Chen Y, Balani K, Agarwal A. Modified Eshelby tensor modeling for elastic property prediction of carbon nanotube reinforced ceramic nanocomposites. Appl Phys Lett. 2007;91:031903. doi: 10.1063/1.2756360
   Web of Science ®Google Scholar
• Gong M, Mei F, Qiao S, et al. Determination of strength properties for yttria stabilised zirconia coatings. Surf Eng. 2015;31:308–315. doi: 10.1179/1743294415Y.0000000004
   Web of Science ®Google Scholar
• Hvizdoš P, Puchý V, Duszová A, et al. Carbon nanofibers reinforced ceramic matrix composites. Rijeka: Nanofibers: In Tech Open Access Publishers; 2011. p. 241-266.
   Google Scholar
• A Saleh T, K Gupta V. Characterization of the chemical bonding between Al2O3 and nanotube in MWCNT/Al2O3 nanocomposite. Curr Nano Sci. 2012;8:739–743. doi: 10.2174/157341312802884418
   Web of Science ®Google Scholar
• Asl MS, Farahbakhsh I, Nayebi B. Characteristics of multi-walled carbon nanotube toughened ZrB 2–SiC ceramic composite prepared by hot pressing. Cera Int. 2016;42:1950–1958. doi: 10.1016/j.ceramint.2015.09.165
   Google Scholar
• Keshri AK, Singh V, Huang J, et al. Intermediate temperature tribological behavior of carbon nanotube reinforced plasma sprayed aluminum oxide coating. Surf Coat Technol. 2010;204:1847–1855. doi: 10.1016/j.surfcoat.2009.11.032
   Web of Science ®Google Scholar
• Balani K, Chen Y, Harimkar SP, et al. Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution. Acta Biomater. 2007;3:944–951. doi: 10.1016/j.actbio.2007.06.001
   PubMed Web of Science ®Google Scholar
• Goyal R, Sidhu BS, Chawla V. Improving the high-temperature oxidation resistance of ASME-SA213-T11 boiler tube steel by plasma spraying with CNT-reinforced alumina coatings. Anti Cor Met Mater. 2018;65:217–223. doi: 10.1108/ACMM-03-2017-1778
   Web of Science ®Google Scholar
• Ang A, Howse H, Wade S, et al. Manufacturing of nickel based cermet coatings by the HVOF process. Surf Eng. 2016;32:713–724. doi: 10.1179/1743294415Y.0000000031
   Web of Science ®Google Scholar
• Toma D, Brandl W, Köster U. The characteristics of alumina scales formed on HVOF-sprayed MCrAlY coatings. Oxi Met. 2000;53:125–137. doi: 10.1023/A:1004586814837
   Web of Science ®Google Scholar
• Sidhu VPS, Goyal K, Goyal R. An investigation of corrosion resistance of HVOF coated ASME SA213 T91 boiler steel in an actual boiler environment. Anti Cor Met Mater. 2017;64:499–507. doi: 10.1108/ACMM-08-2016-1703
   Web of Science ®Google Scholar
• Kaur M, Singh H, Prakash S. A survey of the literature on the use of high velocity oxy-fuel spray technology for high temperature corrosion and erosion-corrosion resistant coatings. Anti Cor Met Mater. 2008;55:86–96. doi: 10.1108/00035590810859467
   Web of Science ®Google Scholar
• Clarke DR, Oechsner M, Padture NP. Thermal-barrier coatings for more efficient gas-turbine engines. MRS bul. 2012;37:891–898. doi: 10.1557/mrs.2012.232
   Web of Science ®Google Scholar
• Swadźba L, Moskal G, Mendala B, et al. Characterization of microstructure and properties of TBC systems with gradient of chemical composition and porosity. Arch Metall Mater. 2008;53:945–954.
   Web of Science ®Google Scholar
• Guo W, Tam H-Y. Effects of carbon nanotubes on wear of WC/Co micropunches. Int J Adv Manuf Technol. 2014;72:269–275. doi: 10.1007/s00170-014-5661-6
   Web of Science ®Google Scholar
• Goyal R, Sidhu BS, Chawla V. Characterization of plasma-sprayed carbon nanotube (CNT)-reinforced alumina coatings on ASME-SA213-T11 boiler tube steel. Int J Adv Manuf Technol. 2017;92(9-12):3225–3235. doi: 10.1007/s00170-017-0405-z
   Web of Science ®Google Scholar
• Goyal R, Chawla V, Sidhu BS. Study on porosity of plasma sprayed carbon nano tube reinforced composite coatings. Asian Rev Mech Eng. 2014;3:65–69.
   Google Scholar
• Jambagi SC, Agarwal A, Sarkar N, et al. Plasma-sprayed titania and alumina coatings obtained from feedstocks prepared by heterocoagulation with 1 wt.% carbon nanotube. J Mater Eng Perform. 2018;27(5):2364–2372. doi: 10.1007/s11665-018-3319-5
   Web of Science ®Google Scholar
• Goyal K, Singh H, Bhatia R. Hot-corrosion behavior of Cr2O3-CNT-coated ASTM-SA213-T22 steel in a molten salt environment at 700° C. Int J Min Metal Mater. 2019;26:337–344. doi: 10.1007/s12613-019-1742-8
   Web of Science ®Google Scholar
• Bala N, Singh H, Prakash S. Accelerated hot corrosion studies of cold spray Ni–50Cr coating on boiler steels. Mater Des. 2010;31:244–253. doi: 10.1016/j.matdes.2009.06.033
   Web of Science ®Google Scholar
• Prakash S, Singh S, Sidhu B, et al. Tube failures in coal fired boilers. Proceedings of National Seminar on Advances in Material and Processing. India: Indian Institute of Roorkee; 2001. p. 245–253.
   Google Scholar
• Kalsi S, Sidhu T, Singh H. Chlorine based hot corrosion study of cold sprayed NiCrAlY coating. Surf Eng. 2014;30:422–431. doi: 10.1179/1743294413Y.0000000233
   Web of Science ®Google Scholar
• Sidhu T, Prakash S, Agrawal R. Characterisations of HVOF sprayed NiCrBSi coatings on Ni-and Fe-based superalloys and evaluation of cyclic oxidation behaviour of some Ni-based superalloys in molten salt environment. Thin Solid Films. 2006;515:95–105. doi: 10.1016/j.tsf.2005.12.041
   Web of Science ®Google Scholar
• Institute BM, Corrosion ARCo, Gases DfC. A review of available information on corrosion and deposits in coal and oil-fired boilers and gas turbines: Report of ASME Research Committee on Corrosion and Deposits from Combustion Gases: American Society of Mechanical Engineers; 1959.
   Google Scholar
• Goyal K, Singh H, Bhatia R. Hot corrosion behaviour of carbon nanotubes reinforced chromium oxide composite coatings at elevated temperature. Mater Res Exp. 2018;5:116408. doi: 10.1088/2053-1591/aadc34
   Web of Science ®Google Scholar
• Han G, Wang Z, Liu K, et al. Synthesis of CNT-reinforced AZ31 magnesium alloy composites with uniformly distributed CNTs. Mater Sci Eng.: A. 2015;628:350–357. doi: 10.1016/j.msea.2015.01.039
   Web of Science ®Google Scholar
• Goyal K, Singh H, Bhatia R. Mechanical and microstructural properties of carbon nanotubes reinforced chromium oxide coated boiler steel. World J Eng. 2018;15:429–439. doi: 10.1108/WJE-10-2017-0315
   Web of Science ®Google Scholar