References
- Bonilla J, Atarés L, Vargas M, et al. Properties of wheat starch film-forming dispersions and films as affected by chitosan addition. J Food Eng. 2013;114:303–312. doi: 10.1016/j.jfoodeng.2012.08.005
- Fabra MJ, López-Rubio A, Cabedo L, et al. Tailoring barrier properties of thermoplastic corn starch-based films (TPCS) by means of a multilayer design. J Colloid Interface Sci. 2016;483:84–92. doi: 10.1016/j.jcis.2016.08.021
- Ghanbarzadeh B, Almasi H, Oleyaei SA. A novel modified starch/carboxymethyl cellulose/montmorillonite bionanocomposite film: structural and physical properties. Int J Food Eng. 2013;10:121–130. doi: 10.1515/ijfe-2012-0197
- Putri RDA, Setiawan A, Anggraini PD. Effect of carboxymethyl cellulose (CMC) as biopolymers to the edible film sorghum starch hydrophobicity characteristics. AIP Conference Proceedings 1818; 2017; 020044.
- Fei X. Tensile behavior of full-biodegradable PLA/PPC/starch blending film. New Chem Mater. 2011;39:79–80.
- Otey FH, Mark AM, Mehltretter CL, et al. Starch-based film for degradable agricultural mulch. Ind Eng Chem Prod Res Dev. 1974;13:90–92. doi: 10.1021/i360049a018
- Xiong HG, Tang SW, Tang HL, et al. The structure and properties of a starch-based biodegradable film. Carbohydr Polym. 2008;71:263–268. doi: 10.1016/j.carbpol.2007.05.035
- Jariyasakoolroj P, Chirachanchai S. Silane modified starch for compatible reactive blend with poly(lactic acid). Carbohydr Polym. 2014;106:255–263. doi: 10.1016/j.carbpol.2014.02.018
- Sanyang ML, Sapuan SM, Jawaid M, et al. Development and characterization of sugar palm starch and poly (lactic acid) bilayer films. Carbohydr Polym. 2016;146:36–45. doi: 10.1016/j.carbpol.2016.03.051
- Lee SY, Hanna MA. Preparation and characterization of tapioca starch-poly(lactic acid)-cloisite NA+ nanocomposite foams. J Appl Polym Sci. 2008;110:2337–2344. doi: 10.1002/app.27730
- Tverdokhlebov SI, Choinzonov EL, Kolokolova OV, et al. Comparison of titanium mesh implants with PLA-hydroxyapatite coatings for maxillofacial cancer reconstruction. AIP Conf Proc. 2016;1760:020067. doi: 10.1063/1.4960286
- Chen Y, Song Y, Zhang S, et al. Interaction between a high purity magnesium surface and PCL and PLA coatings during dynamic degradation. Biomed Mater. 2011;6:1–8. doi: 10.1088/1748-6041/6/2/025005
- Rhim JW, Lee JH, Hong SI. Increase in water of paperboard by coating with poly(lactide). Packag Technol Sci. 2007;20:393–402. doi: 10.1002/pts.767
- Bergel BF, Luz LM, Santana RMC. Effect of poly(lactic acid) coating on mechanical and physical properties of thermoplastic starch foams from potato starch. Prog Org Coat. 2018;118:91–96. doi: 10.1016/j.porgcoat.2018.01.029
- Vercelheze AES, Fakhouri FM, Dall’Antônia LH, et al. Properties of baked foams based on cassava starch, sugarcane bagasse fibers and montmorillonite. Carbohydr Polym. 2012;87:1302–1310. doi: 10.1016/j.carbpol.2011.09.016
- Zhou XM, Sheng J, Liu X, et al. Preparation and characterization of pea starch /polylactic acid double layer film. Biomass Chem Eng. 2018;52:18–22.
- Zhang R, Xu W, Jiang F. Fabrication and characterization of dense chitosan/polyvinyl-alcohol/poly-lactic-acid blend membranes. Fibers Polym. 2012;13:571–575. doi: 10.1007/s12221-012-0571-4
- Salazar-Sánchez MR, Campo-Erazo SD, Villada-Castillo HS, et al. Structural changes of cassava starch and polylactic acid films submitted to biodegradation process. Int J Biol Macromol. 2019;129:442–447. doi: 10.1016/j.ijbiomac.2019.01.187
- Zhao X, Wu T, Lin Q, et al. Synthesis and characterization of optical active PLA degradable materials. Mater Sci Forum. 2015;815:464–469. doi: 10.4028/www.scientific.net/MSF.815.464
- Wu CS. Characterizing biodegradation of PLA and PLA-g-AA/starch films using a phosphate-solubilizing bacillus species. Macromol Biosci. 2008;8:560–567. doi: 10.1002/mabi.200700181
- Rhim JW, Lee JH, Ng PKW. Mechanical and barrier properties of biodegradable soy protein isolate-based films coated with polylactic acid. LWT - Food Sci Technol. 2007;40:232–238. doi: 10.1016/j.lwt.2005.10.002
- Garlotta D. A literature review of poly(lactic acid). J Polym Environ. 2001;9:63–84. doi: 10.1023/A:1020200822435
- Wan JM, Cao X, Cui L. Effect of chloroform mixed solvent on properties of polylactic acid films. J Wuhan Textile Univ. 2019;32:44–47.
- Hu RH, Sun MY, Lim JK. Moisture absorption, tensile strength and microstructure evolution of short jute fiber/polylactide composite in hygrothermal environment. Mater Des. 2010;31:3167–3173. doi: 10.1016/j.matdes.2010.02.030
- Cao J, Cao S, Wei W, et al. Stepwise regression analysis on PLA / tencel knitted fabric structure and performance of moisture absorption and quick dry. Adv Mat Res. 2011;332-334:1114–1117.
- Foruzanmehr M, Vuillaume PY, Elkoun S, et al. Physical and mechanical properties of PLA composites reinforced by TiO2 grafted flax fibers. Mater Des. 2016;106:295–304. doi: 10.1016/j.matdes.2016.05.103
- Guo C, Guo X, Cai N, et al. Novel fabrication method of porous poly(lactic acid) scaffold with hydroxyapatite coating. Mater Lett. 2012;74:197–199. doi: 10.1016/j.matlet.2012.01.085
- Parrott LJ. Variations of water absorption rate and porosity with depth from an exposed concrete surface: Effects of exposure conditions and cement type. Cem Concr Res. 1992;22:1077–1088. doi: 10.1016/0008-8846(92)90038-W