Characteristics and properties of Co–Cr alloy coatings prepared by electrodeposition

References

• Ohgai T, Tanaka Y, Fujimaru T. Soft magnetic properties of Ni–Cr and Co–Cr alloy thin films electrodeposited from aqueous solutions containing trivalent chromium ions and glycine. J Appl Electrochem. 2012;42:893–899. DOI:10.1007/s10800-012-0472-7.
   Web of Science ®Google Scholar
• Zhang W, Li Y, Hu S, et al. Effect of powder oxygen content on the microstructure and properties of Co–Cr dental alloys fabricated by selective laser melting. Powder Metall. 2018;61:157–163. DOI:10.1080/00325899.2017.1423200.
   Web of Science ®Google Scholar
• Mahdavi S, Allahkaram SR. Composition, characteristics and tribological behavior of Cr, Co–Cr and Co–Cr/TiO2 nano-composite coatings electrodeposited from trivalent chromium based baths. J Alloys Compd. 2015;635:150–157. DOI:10.1016/j.jallcom.2015.02.119.
   Web of Science ®Google Scholar
• Verdian MM. Corrosion behaviour of HVOF-sprayed Co–Cr–W–C coating in NaCl solution. Trans IMF. 2018;96:206–211. DOI:10.1080/00202967.2018.1475932.
   Web of Science ®Google Scholar
• Lakra S, Maharana HS, Basu A. Synthesis and characterization of Cr-ZrO2 composite coating formed by DC and pulse electrodeposition. Mater Manuf Processes. 2016;31:1447–1453. DOI:10.1080/10426914.2016.1151039.
   Web of Science ®Google Scholar
• Anand EE, Natarajan S. Strengthening mechanisms in multiwalled carbon nanotubes reinforced Co–W pulse electrodeposited coatings. Mater Manuf Processes. 2016;31:48–52. DOI:10.1080/10426914.2015.1004697.
   Web of Science ®Google Scholar
• Bikulčius G, Češunienė A, Selskienė A, et al. Dry sliding tribological behavior of Cr coatings electrodeposited in trivalent chromium sulphate baths. Surf Coat Technol. 2017;315:130–138. DOI:10.1016/j.surfcoat.2017.01.076.
   Web of Science ®Google Scholar
• Protsenko VS, Gordiienko VO, Danilov FI, et al. Unusually high current efficiency of nanocrystalline Cr electrodeposition process from trivalent chromium bath. Surf Eng. 2011;27:690–692. DOI:10.1179/1743294410Y.0000000019.
   Web of Science ®Google Scholar
• Zheng M, Ahn Y, Yoon Y, et al. Removal of Cr(VI) from aqueous solution using magnetite/non-oxidative graphene composites: synergetic effect of Cr(VI) on dyes removal. Sep Sci Technol. 2016;51:2958–2969. DOI:10.1080/01496395.2016.1231693.
   Web of Science ®Google Scholar
• Survilienė S, Češūnienė A, Selskis A, et al. Electrodeposition of chromium–cobalt alloy from Cr(III) formate-urea electrolyte. Trans IMF. 2010;88:100–106. DOI:10.1179/174591910X12646057426299.
   Web of Science ®Google Scholar
• Mahdavi S, Allahkaram SR, Heidarzadeh A. Characteristics and properties of Cr coatings electrodeposited fromCr(III) baths. Mater Res Express. 2019;6:026403. doi: 10.1088/2053-1591/aaeb4f
   Web of Science ®Google Scholar
• Bikulčius G, Češūnienė A, Matijošius T, et al. Dry sliding tribological behaviour of bilayer Cr/Cr coatings obtained in sulphate Cr(III) baths. Trans IMF. 2018;96:130–136. DOI:10.1080/00202967.2018.1443422.
   Web of Science ®Google Scholar
• Torabinejad V, Aliofkhazraei M, SabourRouhaghdam A, et al. Corrosion properties of Ni-Fe-Cr (III) multilayer coating synthesized via pulse duty cycle variation. Mater Corros. 2017;68:347–354. DOI:10.1002/maco.201609071.
   Web of Science ®Google Scholar
• Korsunsky AM, Constantinescu A. Work of indentation approach to the analysis of hardness and modulus of thin coatings. Mater Sci Eng A. 2006;423:28–35. doi: 10.1016/j.msea.2005.09.126
   Web of Science ®Google Scholar
• Korsunsky AM, McGurk MR, Bull SJ, et al. On the hardness of coated systems. Surf Coat Technol. 1998;99:171–183. doi: 10.1016/S0257-8972(97)00522-7
   Web of Science ®Google Scholar
• Edigaryan AA, Polukarov YM. The electrodeposition of cobalt–chromium alloys from sulfate–oxalate solutions. Prot Met. 2001;37:97–100. doi: 10.1023/A:1010308801540
   Google Scholar
• Spiridonov BA. Electrodeposition of chromium-cobalt alloy coatings from sulfate electrolytes. Russ J Appl Chem. 2003;76:65–70. doi: 10.1023/A:1023339716007
   Web of Science ®Google Scholar
• Yang Y, Gong Z, Deng L, et al. Electrodeposition of Ni-Cr alloy on aluminum substrate. J Cent South Univ Technol. 2006;13:219–224. doi: 10.1007/s11771-006-0134-1
   Web of Science ®Google Scholar
• Bolelli G, Lusvarghi L. Heat treatment effects on the tribological performance of HVOF sprayed Co-Mo-Cr-Si coatings. J Therm Spray Technol. 2006;15:802–810. doi: 10.1361/105996306X146721
   Web of Science ®Google Scholar
• Li XY, Habibi N, Bell T, et al. Microstructural characterisation of a plasma carburised low carbon Co–Cr alloy. Surf Eng. 2007;23:45–51. doi: 10.1179/174329407X161564
   Web of Science ®Google Scholar
• Kumagai K, Nomura N, Ono T, et al. Dry friction and wear behavior of forged Co-29Cr-6Mo alloy without Ni and C additions for implant applications. Mater Trans. 2005;46:1578–1587. doi: 10.2320/matertrans.46.1578
   Web of Science ®Google Scholar
• Huang P, Salinas-Rodriguez A, López HF. Tribological behaviour of cast and wrought Co–Cr–Mo implant alloys. Mater Sci Technol. 1999;15:1324–1330. doi: 10.1179/026708399101505284
   Web of Science ®Google Scholar
• Chen J, Dong H. Corrosion and corrosion wear behaviour of plasma carburised Stellite 21 Co–Cr alloy. Tribol Mater Surf Interfaces. 2009;3:24–30. doi: 10.1179/175158309X419043
   Google Scholar
• Oksiuta Z, Dabrowski JR. Rotary cold re-pressing and heat treatment of sintered materials from Co–Cr–Mo alloy powder. Powder Metall. 2002;45:63–66. doi: 10.1179/003258902225001533
   Web of Science ®Google Scholar
• Li B, Lin A, Wu X, et al. Electrodeposition and characterization of Fe–Cr–P amorphous alloys from trivalent chromium sulfate electrolyte. J Alloys Compd. 2008;453:93–101. doi: 10.1016/j.jallcom.2006.11.162
   Web of Science ®Google Scholar
• Zeng Z, Zhang J. Electrodeposition and tribological behavior of amorphous chromium-alumina composite coatings. Surf Coat Technol. 2008;202:2725–2730. doi: 10.1016/j.surfcoat.2007.10.008
   Web of Science ®Google Scholar
• Tavoosi M, Barahimi A. Corrosion behavior of amorphous–nanocrystalline Fe–Ni–Cr electrodeposited coatings. Surf Interfaces. 2017;8:103–111. doi: 10.1016/j.surfin.2017.05.004
   Web of Science ®Google Scholar
• Torbati-Sarraf H, Torbati-Sarraf SA, Poursaee A, et al. Electrochemical behavior of a magnesium ZK60 alloy processed by high-pressure torsion. Corros Sci. 2019;154:90–100. doi: 10.1016/j.corsci.2019.04.006
   Web of Science ®Google Scholar
• Brenner A. Electrodeposition of alloys: principles and practice. New York (NY): Academic Press; 1963.
   Google Scholar
• Gamburg YD, Zangari G. Theory and practice of metal electrodeposition. New York (NY): Springer; 2011.
   Google Scholar
• Xu L, Gong Z, Tang J, et al. Ni-Cr alloy electrodepositing technology on Fe substrate and coating performance. J Cent South Univ Technol. 2007;14:181–185. doi: 10.1007/s11771-007-0036-x
   Web of Science ®Google Scholar
• Imanieh I, Yousefi E, Dolati A, et al. Experiments design for hardness optimization of the Ni-Cr alloy electrodeposited by pulse plating. Acta Metall Sinica (English Letters). 2013;26:558–564. doi: 10.1007/s40195-013-0120-1
   Web of Science ®Google Scholar
• Xu L, Du J, Ge S, et al. Preparation and characterization of nanocrystalline Fe–Ni–Cr alloy electrodeposits on Fe substrate. J Appl Electrochem. 2009;39:713–717. doi: 10.1007/s10800-008-9714-0
   Web of Science ®Google Scholar
• Gabe DR. The role of hydrogen in metal electrodeposition processes. J Appl Electrochem. 1997;27:908–915. doi: 10.1023/A:1018497401365
   Web of Science ®Google Scholar
• He XK, Qiu GZ, Chen BZ, et al. Process of pulse electrodeposition nanocrystalline chromium from trivalent chromium bath. Trans Nonferrous Met Soc China. 2007;17:s685–s691. doi: 10.1016/S1003-6326(07)60103-4
   Web of Science ®Google Scholar
• Ebrahim-Ghajari M, Allahkaram SR, Mahdavi S. Corrosion behaviour of electrodeposited nanocrystalline Co and Co/ZrO2 nanocomposite coatings. Surf Eng. 2015;31:251–257. doi: 10.1179/1743294414Y.0000000355
   Web of Science ®Google Scholar
• Dolati AG, Ghorbani M, Afshar A. The electrodeposition of quaternary Fe–Cr–Ni–Mo alloys from the chloride-complexing agents electrolyte. part I. processing. Surf Coat Technol. 2003;166:105–110. doi: 10.1016/S0257-8972(02)00669-2
   Web of Science ®Google Scholar
• Archard JF. Contact and rubbing of flat surfaces. J Appl Phys. 1953;24:981–988. doi: 10.1063/1.1721448
   Web of Science ®Google Scholar