Tribo-behaviour of APS and HVOF sprayed WC–Cr₃C₂–Ni coatings for gears

References

• Murariu AC, Cernescu AV, Perianu I-A. The effect of saline environment on the fatigue behaviour of HVOF-sprayed WC–CrC–Ni coatings. Surf Eng. 2018;34:755–761. doi: 10.1080/02670844.2017.1388561
   Web of Science ®Google Scholar
• Farokhian G, Salehnasab B, Zat Ajam H, et al. Influence of WC–20Co–1Ni coating by HVOF on lifespan of the downhole drilling motors. Surf Eng. 2018;34:771–782. doi: 10.1080/02670844.2017.1278643
   Web of Science ®Google Scholar
• Anil Kumar R, Radhika N. Enhancement of mechanical and wear properties of tungsten carbide coated AA 6063 alloy using detonation gun technique. Int J Surf Eng Coat. 2018;96:212–219.
   Google Scholar
• Bayar İ, Ulutan M. Surface modification of atmospheric plasma sprayed cermet coatings by plasma transferred arc method. Int J Surf Eng Coat. 2019;97:298–304.
   Google Scholar
• Ben Mahmud T, Khan TI, Farrokhzad MA. Heat treatment effect on wear behaviour of HVOF sprayed near-nanostructured coatings. Surf Eng. 2017;33:72–82. doi: 10.1080/02670844.2016.1258769
   Web of Science ®Google Scholar
• Liu Y, Liu W, Ma Y, et al. A comparative study on wear and corrosion behaviour of HVOF- and HVAF-sprayed WC–10Co–4Cr coatings. Surf Eng. 2017;33:63–71. doi: 10.1080/02670844.2016.1218194
   Web of Science ®Google Scholar
• Pishva P, Salehi M, Golozar MA. Effect of grinding on surface characteristics of HVOF-sprayed WC–10Co–4Cr coatings. Surf Eng. 2019. https://doi.org/10.1080/02670844.2019.1647938.
   Web of Science ®Google Scholar
• Sundararajan G, Joshi SV, Krishna LR. Engineered surfaces for automotive engine and power train components. Curr Opin Chem Eng. 2016;11:1–6. doi: 10.1016/j.coche.2015.10.001
   Web of Science ®Google Scholar
• Gong T, Yao P, Zuo X, et al. Influence of WC carbide particle size on the microstructure and abrasive wear behavior of WC–10Co–4Cr coatings for aircraft landing gear. Wear. 2016;362–363:135–145. doi: 10.1016/j.wear.2016.05.022
   Web of Science ®Google Scholar
• Vinoth IS, Detwal S, Umasankar V, et al. Tribological studies of automotive piston ring by diamond-like carbon coating. Tribol - Mater Surf Interfaces. 2019;13:31–38. doi: 10.1080/17515831.2019.1569852
   Web of Science ®Google Scholar
• Usmani S, Sampath S, Houck DL, et al. Effect of carbide grain size on the sliding and abrasive wear behavior of thermally sprayed WC-Co coatings. Tribol Trans. 1997;40:470–478. doi: 10.1080/10402009708983682
   Web of Science ®Google Scholar
• Bolelli G, Berger L-M, Bonetti M, et al. Comparative study of the dry sliding wear behaviour of HVOF-sprayed WC–(W,Cr)2C–Ni and WC–CoCr hard metal coatings. Wear. 2014;309:96–111. doi: 10.1016/j.wear.2013.11.001
   Web of Science ®Google Scholar
• Geng Z, Duan D, Hou S, et al. Tribological behavior of WC-12Co air plasma–sprayed coating at elevated temperatures. Tribol Trans. 2016;59:55–61. doi: 10.1080/10402004.2015.1068423
   Web of Science ®Google Scholar
• Masuku ZH, Olubambi PA, Potgieter JH, et al. Tribological and corrosion behavior of HVOF sprayed WC-Co-based composite coatings in simulated mine water environments. Tribol Trans. 2015;58:337–348. doi: 10.1080/10402004.2014.971994
   Web of Science ®Google Scholar
• Shu D, Li Z, Yao C, et al. In situ synthesised WC reinforced nickel coating by laser cladding. Surf Eng. 2018;34:276–282. doi: 10.1080/02670844.2017.1320057
   Web of Science ®Google Scholar
• Tianyuan S, Dejun K. Microstructures and high temperature friction-wear performances of laser remelted WC-12Co coatings by HVOF. Tribol Trans. 2015;60:781–788. doi: 10.1080/10402004.2016.1211780
   Web of Science ®Google Scholar
• Thiruvikraman C, Balasubramanian V, Sridhar K. Optimizing HVOF spray parameters to maximize bonding strength of WC-Cr3C2-Ni coatings on AISI 304L stainless steel. J Therm Spray Technol. 2014;23(5):860–875. doi: 10.1007/s11666-014-0091-4
   Web of Science ®Google Scholar
• Sidhu VPS, Goyal K, Goyal R. Hot corrosion behaviour of HVOF-sprayed 93(WC-Cr3C2)-7Ni and 83WC-17Co coatings on boiler tube steel in coal fired boiler. Aust J Mech Eng. 2019;17:127–132. doi: 10.1080/14484846.2017.1364834
   Web of Science ®Google Scholar
• Bhosale DG, Rathod WS. Dimensional optimization of helical gear pair through finite element analysis using subproblem approximation method. ATSMDE: Mater Eng. 2017;1:1–9.
   Google Scholar
• Timoshenko S, Goodier JN. Theory of elasticity. 3rd ed. New York: McGraw Hill book company; 2013.
   Google Scholar
• Bartuli C, Valente T, Cipri F, et al. Parametric study of an HVOF process for the deposition of nanostructured WC-Co coatings. J Therm Spray Technol. 2005;14(2):187–195. doi: 10.1361/10599630523746
   Web of Science ®Google Scholar
• Dhakar B, Chatterjee S, Sabiruddin K. Influence of process parameters on the formation of phases and mechanical properties of plasma sprayed Al2O3–Cr2O3 coatings. Mater Res Innov. 2017;21:367–376. doi: 10.1080/14328917.2016.1265246
   Google Scholar
• Voitoich RF, Pugach EA. High-temperature oxidation characteristics of the carbides of the group VI transition metals. Sov Powder Metall Met Ceram. 1973;12:314–318.
   Google Scholar
• Bouaricha S, Ouchene A, Legoux J-G. Rietveld analysis for studying the decarburisation in HVOF WC–CO coatings. Surf Eng. 2018;34:747–754. doi: 10.1080/02670844.2017.1415737
   Web of Science ®Google Scholar
• Kato K. Friction and wear of passive metals and coatings. Amsterdam: Woodhead Publishing Series in Metals and Surface Engineering (Science Direct); 2011. p. 65–99.
   Google Scholar
• Neale MJ. Lubrication and reliability handbook. Amsterdam: Elsevier; 2000.
   Google Scholar
• Liu Y, Erdemir A, Meletis EI. A study of the wear mechanism of diamond-like carbon films. Surf Coat Technol. 1996;82:48–56. doi: 10.1016/0257-8972(95)02623-1
   Web of Science ®Google Scholar