References
- Sun YH. Inverse ductile–brittle transition in metallic glasses? Mater Sci Technol. 2015;31:635–650. doi: 10.1179/1743284714Y.0000000684
- Solomon I, Solomon N. Electrical, magnetic and thermal characterization of amorphous Fe-Co-Cr-B-Si alloys. Can Metall Quart. 2010;49:311–318. doi: 10.1179/cmq.2010.49.3.311
- Zuo Y, Wang SL, Huang Y, et al. Corrosion resistance of Fe-based bulk amorphous alloy with sulfide inclusion. Acta Metall Sin-Engl. 2018;31:1098–1108. doi: 10.1007/s40195-018-0791-8
- Lyphout C, Björklund S. Internal diameter HVAF spraying for wear and corrosion applications. J Therm Spray Technol. 2015;24:235–243.
- Li G, Gan YY, Liu CH, et al. Corrosion and wear resistance of Fe-based amorphous coatings. Coatings. 2020;10:73. doi: 10.3390/coatings10010073
- Ma HR, Chen XY, Li JW, et al. Fe-based amorphous coating with high corrosion and wear resistance. Surf Eng. 2017;33:56–62. doi: 10.1080/02670844.2016.1176718
- Miura H, Isa S, Omuro K, et al. Production of amorphous Fe-Ni based alloys by flame-spray quenching. Mater Trans JIM. 1981;22:597–606. doi: 10.2320/matertrans1960.22.597
- Wang G, Chen J, Huang ZJ. Influence of spraying distance on microstructure and corrosion behavior of amorphous alloy coatings by thermal spraying. J Funct Mater. 2016;47:6185–6189.
- Branagan DJ, Swank WD, Meacham BE. Maximizing the glass fraction in iron-based high velocity oxy-fuel coatings. Metall Mater Trans A. 2009;40:1306–1313. doi: 10.1007/s11661-008-9581-7
- Farmer J, Choi JS, Saw C, et al. Iron-based amorphous metals: high-performance corrosion-resistant material development. Metall Mater Trans A. 2009;40:1289–1305. doi: 10.1007/s11661-008-9779-8
- Wu NC, Chen K, Sunb WH, et al. Correlation between particle size and porosity of Fe-based amorphous coating. Surf Eng. 2018;35:37–45. doi: 10.1080/02670844.2018.1447782
- Zhang HJ, Gong YF, Zhang BT, et al. Corrosion and algal adhesion behaviors of HVOF-sprayed Fe-based amorphous coatings for marine applications. J Therm Spray Technol. 2019;28:283–290. doi: 10.1007/s11666-018-0774-3
- Qin YJ, Wu YP, Zhang JF, et al. Optimization of the HOVF spray parameters by Taguchi method for high corrosion-resistant Fe-based coatings. J Mater Eng Perform. 2015;24:2637–2644. doi: 10.1007/s11665-015-1536-8
- Li CY, Ding JQ, Zhu FP, et al. Indentation creep behavior of Fe-based amorphous coatings fabricated by high velocity Oxy-fue. J Non-Cryst Solids. 2018;503–504:62–68. doi: 10.1016/j.jnoncrysol.2018.09.018
- Chen JC, Si H, Zhan WS, et al. Structural relaxation of amorphous alloys Fei13.3Ni69.6B16.2Si0.9. Acta Phys Sin. 1985;34:142–146.
- Fu YB. 含非晶涂层制备及其晶化规律研究 [Study on preparation and crystallization rules of containing amorphous coatings]. BJUT. 2009. China.
- Zhao YC, Mao RP, Yuan XP, et al. Corrosion behaviour of Ti-based bulk metallic glass matrix composites. J Mater Eng. 2018;46:25–30.
- Wang SL, Cheng JC, Yi SH, et al. Corrosion resistance of Fe-based amorphous metallic matrix coating fabricated by HVOF theral spraying. Trans Nonferrous Met Soc China. 2014;24:146–151. doi: 10.1016/S1003-6326(14)63040-5
- Souza CAC, Ribeiro DV, Kiminami CS. Corrosion resistance of Fe-Cr-based amorphous alloys: an overview. J Non-Cryst Solids. 2016; 442:56–66. doi: 10.1016/j.jnoncrysol.2016.04.009
- Li XJ, Liu D, Liu Z, et al. Electrochemical performance of surface modification coatings on aluminum alloy in marine environment. Surf Technol. 2018;47:181–185.
- Peng J, Long ZL, Wei HQ, et al. Creep behavior of a Fe-based bulk amorphous alloy using nanoindentation. Acta Phys Sin. 2009;58:4059–4065.
- Venkateswarlu K, Rajinikanth V, Naveen T, et al. Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques. Wear. 2009;266:995–1002. doi: 10.1016/j.wear.2009.02.001
- Zhang SQ, Du SM, Niu YP, et al. Friction and wear performances of Fe-based amorphous alloy coating. Lubr Eng. 2010;35:50–52.
- Ma HR, Li JW, Jiao J, et al. Wear resistance of Fe-based amorphous coatings prepared by AC-HVAF and HVOF. Mater Sci Technol. 2016;33:65–71. doi: 10.1080/02670836.2016.1160195
- Pu CH, Xu BS, Wang HD, et al. Wear mechanism of 3Cr13 coating under accelerated condition of dry friction. Tribol. 2009;29:368–373.
- Gao H, Wei XS, Liang DD, et al. Friction and wear properties of HVAF sprayed Fe-based amorphous alloy coatings. Surf Technol. 2018;47:55–63.