References
- Horlock AJ, Sadeghian Z, Mc Cartney DG, et al. High-velocity oxy fuel reactive spraying of mechanically alloyed Ni-Ti-C powders. J Therm Spray Technol. 2005;14(1):77–84. doi: 10.1361/10599630522747
- Fotovvati B, Namdari N, Dehghanghadikolaei A. Fatigue performance of selective laser melted Ti6Al4V components: state of the art. Mater Res Express. 2018;6:012002. doi: 10.1088/2053-1591/aae10e
- Sojoudi H, Kim S, Zhao H, et al. Stable wettability control of nanoporous microstructures by iCVD coating of carbon nanotubes. ACS Appl Mater Interfaces. 2017;9:43287–43299. doi: 10.1021/acsami.7b13713
- Upadhyaya R, Tailor S, Shrivastava S, et al. High performance thermal-sprayed WC-10Co-4Cr coatings in narrow and complex areas. Surf Eng. 2017;34(5):412–421. doi:10.1080/02670844.2017.1375175.
- Pawlowski L. The science and engineering of thermal spray coatings, 2nd ed. Chichester (West Sussex): Wiley; 2008.
- Heimann RB. Plasma spray coating: principles and applications, 2nd ed. Weinheim: Wiley-VCH VerlagsgesellschaftmbH; 1996.
- Nuruzzaman DM, Nakajima A. Toshifumi Mawatari effects of substrate surface finish and substrate material on durability of thermally sprayed WC cermet coating in rolling with sliding contact. Tribol Int. 2006;39:678–685. doi: 10.1016/j.triboint.2005.06.003
- Wen-zhu Z, Bo L. Vacuum friction and wear properties of plasma sprayed MoS2/Cu-based composite coatings. J Mater Eng. 2013;8:16–22. doi:10.3969/j.issn.1001-4381.2013.08.003.
- Mohamed Abbas S, Elayaperumal A. Experimental investigation on the effect of ceramic coating on engine performance and emission characteristics for cleaner production. J Clean Prod. 2018;214; doi:10.1016/j.jclepro.2018.12.040.
- Talib RJ, Saad S, Toff MRM, et al. Thermal spray coating technology – a review. Solid State Sci Technol. 2003;11(1):109–117.
- Toma FL, Potthoff A, Berger LM, et al. Demands, potentials, and economic aspects of thermal spraying with suspensions: a critical review. J Therm Spray Tech. 2015;24:1143. doi: 10.1007/s11666-015-0274-7
- Berger L-M. Application of hardmetals as thermal spray coatings. Int J Ref Met Hard Mat. 2015;49:350–364. doi:10.1016/j.ijrmhm.2014.09.029.
- Nguyen BH, Nguyen VH. Promising applications of graphene and graphene-based nanostructures. Adv Nat Sci: Nanosci Nano Technol. 2016;7:023002, doi:10.1088/2043-6262/7/2/023002.
- Rao CNR, Sood AK, Subrahmanyam KS, et al. Graphene: the new two-dimensional nanomaterial. Angew Chem Int Ed. 2009;48:7752–7777. doi:10.1002/anie.200901678.
- Singla MK, Singh H, Chawla V. Thermal sprayed CNT reinforced nanocomposite coatings – a review. J Miner Mater Charact Eng. 2011;10(8):717–726.
- Tian HL, Guo MQ, Wang CL, et al. Tribological behaviour of a self-lubricated GO/WC–12Co thermal spray coating. Surf Eng. 2017;34; doi:10.1080/02670844.2017.1352202.
- Eslamian and E, Shirvani H. Numerical investigation of multiphase supersonic swirl flow inside convergent-divergent nozzle. J Comput Multiphase Flows. 2016;8(2):120–136. doi:10.1177/1757482X16634234.
- Thiyagu M, Karunamoorthy L, Arunkumar N. Thermal and tool wear characterization of graphene oxide coated through magnetorheological fluids on cemented carbide tool inserts. Arch Civil Mech Eng. 2019;19(4):1043–1055. doi:10.1016/j.acme.2019.05.005.
- Allawzi M, Abu-Arabi MK, Al-Zoubi HS, et al. Physicochemical characteristics and thermal stability of Jordanian jojoba oil. J Am Oil Chem Soc. 1998;75(1):57–62. doi: 10.1007/s11746-998-0010-2
- Kandanur SS, Rafiee MA, Yavari F, et al. Suppression of wear in graphene polymer composites. Carbon N Y. 2012;50:3178–3183. doi: 10.1016/j.carbon.2011.10.038
- Vashishtha N, Khatirkar RK, Sapate SG. Tribological behaviour of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2−25NiCr coatings. Tribol Int. 2017;105:55–68. doi:10.1016/j.triboint.2016.09.025.
- Lin LY, Kim DE, Kim WK, et al. Friction and wear characteristics of multi-layer graphene films investigated by atomic force microscopy. Surf Coat Technol. 2011;205:4864–4869. doi: 10.1016/j.surfcoat.2011.04.092
- Berman D, Erdemir A, Sumant AV. Few layer graphene to reduce wear and friction on sliding steel surfaces. Carbon N Y. 2013;54:454–459. doi: 10.1016/j.carbon.2012.11.061
- Kannan KT, Rameshbabu S. Tribological properties of modified jojoba oil as probable base stoke of engine lubricant. J Mech Sci Technol. 2018;32:1739–1747. doi: 10.1007/s12206-018-0330-6
- Larsen-Basse J. Binder extrusion in sliding wear of WC-Co alloys. Wear. 1985;105(3):247–256. doi:10.1016/0043-1648(85)90071-7.
- Savarimuthu AC, Taber HF, Megat I, et al. Sliding wear behavior of tungsten carbide thermal spray coatings for replacement of chromium electroplate in aircraft applications. J Therm Spray Technol. 2001;10(3):502–510. doi: 10.1361/105996301770349286
- Jayabalakrishnan D, Balasubramanian M. Eccentric-weave FSW between Cu and AA 6061-T6 with reinforced graphene nanoparticles. Mater Manuf Processes. 2017;33(3):333–342. doi:10.1080/10426914.2017.1339323.
- Gertsman VY, Bruemmer SM. Study of grain boundary character along intergranular stress corrosion crack paths in austenitic alloys. Acta Mater. 2001;49(9):1589–1598. doi:10.1016/s1359-6454(01)00064-7.