References
- Leyens C, Peters M. Titanium and titanium alloys: fundamentals and applications. Hoboken (NJ): Wiley; 2003. doi:10.1002/3527602119.
- Guillemot F, Prima F, Bareille R, et al. Design of new titanium alloys for orthopaedic applications. Design of new titanium alloys for orthopaedic applications. Med Biol Eng Comput. 2004;42:137–141. doi:10.1007/BF02351023.
- Sanders AP, Tikekar N, Lee C, et al. Surface hardening of titanium articles with titanium boride layers and its effects on substrate shape and surface texture. J Manuf Sci Eng. 2009;131:031001–031008. doi:10.1115/1.3106032.
- Philip JT, Mathew J, Kuriachen B. Tribology of Ti6Al4V: a review. Friction. 2019;7(6):497–536. doi:10.1007/s40544-019-0338-7.
- Kara L, Özkan D, Yağc MB, et al. Friction and wear behaviors of TiN coatings under dry and vacuum conditions. Tribol Trans. 2019;62(3):362–373. doi:10.1080/10402004.2018.1559385.
- Bailey R, Sun Y. An investigation into the effects of process conditions on the tribological performance of pack carburized titanium with limited oxygen diffusion. J Mater Eng Perform. 2018;27(6):3091–3101. doi:10.1007/s11665-018-3382-y.
- Varol T, Canakci A, Ozsahin S, et al. Artificial neural network-based prediction technique for coating thickness in Fe-Al coatings fabricated by mechanical milling. Part Sci Technol. 2018;6(6):742–750. doi:10.1080/02726351.2017.1301607.
- Keddam M, Kulka M. Simulation of the growth kinetics of FeB and Fe2B layers on AISI D2 Steel by the integral method. Phys Met Metallogr. 2018;119(9):842–851. doi:10.1134/S0031918X18090065.
- Gaona-Martínez MJ, Alonso-Saavedra OF, Ramírez Ramínez LH, et al. Mechanical stability of boron-based coatings grown on Incoloy 909 superalloy by thermochemical diffusion. Surf Eng. 2018;34(7):527–535. doi:10.1080/02670844.2017.1369667.
- Stojanović Ž, Stanisavljev S. Overview of diffusion boriding problems in industrial applications. Zašt Mater. 2019;60(2):190–196. doi:10.5937/zasmat1902190S.
- Dudek K, Szczypiński-Sala W, Lubas J. Influence of laser boriding on the friction and wear of sliding couples with bearing alloys. Surf Rev Lett. 2019. doi:10.1142/S0218625X19500847.
- Krelling AP, Melo FS, Almeida EAS, et al. Microstructure and properties of borided Monel 400 alloy. Mater Res Express. 2019;6(19):106410), doi:10.1088/2053-1591/ab387a.
- Kara G, Purcek G, Atasoy Y, et al. Microstructure and tribological properties of Ti borided by electron beam evaporation technique. J Balk Tribol Assoc. 2015;21(1):24–37.
- Belkin PN, Kusmanov SA. Plasma electrolytic boriding of steels and titanium alloys. Surf Eng Appl Electrochem. 2019;55(1):1–30. doi:10.3103/S106837551901006X.
- Litoria AK, Figueroa CA, Bim LT, et al. Pack-boriding of low alloy steel: microstructure evolution and migration behaviour of alloying elements. Philos Mag. 2019: 1–26. doi:10.1080/14786435.2019.1680890.
- Ma SL, Duan YH, Microstructure LP. Growth kinetics and some mechanical properties of boride layers produced on pure titanium by molten-salt boriding. J Mater Eng Perform. 2017;26:4544–4555. doi:10.1007/s11665-017-2884-3.
- Gautier G, Faga MG, Tebaldo V. Impact wear resistance of nanocomposite coatings for aircraft components. Key Eng Mater. 2019;813:387–392. doi:10.4028/www.scientific.net/KEM.813.387.
- Bouaziz SA, Boudaoud N, Zanoun A. Thermochimical boriding of a C38 steel in molten salts containing borax-SiC. Mater Tech. 2009;97:253–259. doi:10.1051/mattech/2009036.
- Oliver WC, Pharr GM. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7:1564–1583. doi:10.1557/jmr.1992.1564.
- Oliver WC, Pharr GM. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res. 2004;19:3–20. doi:10.1557/jmr.2004.19.1.3.
- Welsch G, Boyer R, Collings EW. Materials Properties Handbook: Titanium Alloys. 1st ed. Cleveland. OH: ASM International; 1993.
- McElligott J, Shi Z, Li Y, et al. Corrosion of Ti35Zr28Nb in Hanks’ solution and 3.5 wt% NaCl solution. Mater Corros. 2018;69(2):197–206. doi:10.1002/maco.201709684.
- Taazim NT, Jauhari I, Miyashita Y, et al. Development and kinetics of TiB2 layers on the surface of titanium alloy by superplastic boronizing. Metall Mater Trans A. 2016;47:2217–2222. doi:10.1007/s11661-016-3359-0.
- Müller WH, Weinberg K, Böhme T. On the effect of Kirkendall voids on solder joint reliability. PAMM. 2007;7:4030035–4030036. doi:10.1002/pamm.200700867.
- Spada FE, Bowman RC, Cantrell JS. Hydride phase composition and crystal structure in Zr2PdHx. J Common Met. 1987;2987(129):197–205. doi:10.1016/0022-5088(87)90048-8.
- Gorsse S, Miracle DB. Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements. Acta Mater. May 2003;51(9):2427–2442. doi:10.1016/S1359-6454(02)00510-4.
- Haghshenas M, Totuk O, Masoomi M, et al. Small-scale mechanical properties of additively manufactured Ti-6Al-4V. Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium-An Additive Manufacturing Conference; 2017 August 7-9:134–147.
- Munro RG. Material properties of titanium diboride. J Res Natl Inst Stand Technol. 2000;105:709–720. doi:10.6028/jres.105.057.
- Panich N, Wangyao P, Hannongbua S, et al. Multilayered systems of nanostructured TiB2 thin films and its mechanical properties. J Met Mater Miner. 2006;16(1):45–50.
- Bazhin AI, Goncharov AA, Pogrebnyak AD, et al. Superhardness effect in transition-metal diborides films. Phys Met Metallogr. 2016;117(6):594–601. doi:10.1134/S0031918X16060028.
- Atar E, Kayali ES, Cimenoglu H. Friction and wear behaviour of borided Ti6Al4v alloy sliding against Al2O3 and Si3N4 Balls in water. Defect Diffus Forum. 2011;312–315:1004–1009. doi:10.4028/www.scientific.net/DDF.312-315.1004.
- Sanchez CMT, Rebollo Plata B, da Costa MEH M, et al. Titanium diboride thin films produced by dc-magnetron sputtering: structural and mechanical properties. Surf Coat Tech. 2011;205:3698–3702. doi:10.1016/j.surfcoat.2011.01.014.
- Berthier Y, Vincent L, Godet M. Fretting fatigue and fretting wear. Tribol Int. 1989;22:235–242. doi:10.1016/0301-679X(89)90081-9.
- Yetim AF, Yildiz F, Vangolu Y, et al. Several plasma diffusion processes for improving wear properties of Ti6Al4 V alloy. Wear. 2009;267:2179–2185. doi:10.1016/j.wear.2009.04.005.
- Chauhan SR, Dass K. Dry sliding wear behaviour of titanium (Grade 5) alloy by using response surface methodology. Adv Tribol. 2013;9; doi:10.1155/2013/272106. Article ID 272106:
- Ripoll MR, Heindl F, Lechner C, et al. Enhanced sliding wear resistance of technical alloys by hard particle reinforcement using machine hammer peening. Tribol Trans. 2017;60(3):479–789. doi:10.1080/10402004.2016.1178828.