Effect of stand-off distance (SOD) on damping properties of atmospheric plasma sprayed alumina-zirconia ceramic coatings

References

• Mrdak M, Medjo B, Veljić D, et al. The influence of powder feed rate on mechanical properties of atmospheric plasma spray (APS) Al-12Si coating. Rev Adv Mater Sci. 2019;58:75–81. doi: 10.1515/rams-2019-0007
   Web of Science ®Google Scholar
• Djendel M, Allaoui O, Boubaaya O. Characterization of alumina–titania coatings produced by atmospheric plasma spraying on 304 SS steel. Acta Phys Pol A ICCESEN. 2016;132:538–540. doi: 10.12693/APhysPolA.132.538
   Web of Science ®Google Scholar
• Dey A, Mukhopadhyay AK, Gangadharan S, et al. Development of hydroxyapatite coating by microplasma spraying. Mater Manuf Process. 2009;24:1321–1330. doi: 10.1080/10426910902997035
   Web of Science ®Google Scholar
• Thirumalaikumarasamy D, Shanmugam K, Balasubramanian V. Effect of atmospheric plasma spraying parameters on porosity level of alumina coatings. Surf Eng. 2012 Aug;28(10):759–765. doi: 10.1179/1743294412Y.0000000058
   Web of Science ®Google Scholar
• Hasan MF, Wang J, Berndt CC. Effect of power and stand-off distance on plasma sprayed hydroxyapatite coatings. Mater Manuf Process. 2013;28:1279–1285. doi: 10.1080/10426914.2013.811730
   Web of Science ®Google Scholar
• Sarikaya O. Effect of some parameters on microstructure and hardness of alumina coatings prepared by the air plasma spraying process. Surf Coat Technol. 2005 Jan;190(2–3):388–393. doi: 10.1016/j.surfcoat.2004.02.007
   Web of Science ®Google Scholar
• Dey A, Mukhopadhyay AK. Microplasma sprayed hydroxyapatite coatings. Boca Raton: CRC Press. Taylor & Francis; 2015.
   Google Scholar
• Aruna ST, Paligan BA, Balaji N, et al. Properties of plasma sprayed yttria stabilized zirconia thermal barrier coating prepared from co-precipitation synthesized powder. Ceram Int. 2014 Aug;40(7 Part B):11157–11162. doi: 10.1016/j.ceramint.2014.03.143
   Web of Science ®Google Scholar
• Michalak M, Latka L, Sokolowski P, et al. Investigations of microstructure and selected mechanical properties of Al2O3 + 40 wt.% TiO2 coatings deposited by atmospheric plasma spraying (APS). Weld Technol Rev. 2019;91(8):7–11. doi: 10.26628/wtr.v91i8.1068
   Google Scholar
• Iqbal RM, Shabir MF, Jerold BD, et al. Investigation on the thermal properties of the multi-layered ceramic coatings deposited using atmospheric plasma spraying. Mater Res Innovations. 2015;19(8):301–305.
   Google Scholar
• Jeong BH, Park SM, Hwang WS, et al. Thermal properties of plasma-sprayed multilayer Al2O3/yttria-stabilized zirconia coating. J Nanosci Nanotechnol. 2020;20:524–529. doi: 10.1166/jnn.2020.17271
   PubMed Web of Science ®Google Scholar
• Odhiambo GJ, Li W, Zhao Y, et al. Porosity and its significance in plasma sprayed coating: a review. Coatings. 2019;9:460. doi: 10.3390/coatings9070460
   Web of Science ®Google Scholar
• Yin Z, Tao S, Zhou X. Effect of the thickness on properties of Al2O3 coatings deposited by plasma spraying. Mater Charact. 2011 Jan;62(1):90–93. doi: 10.1016/j.matchar.2010.11.002
   Web of Science ®Google Scholar
• Djendel M, Allaoui O, Bouzid A. Effect of air plasma spraying parameters on the quality of coating. Int J Comput Exp Sci Eng. 2016;2(2):1–5.
   Google Scholar
• Mrdak MR, Vencl A, Nedeljkovic BD, et al. Influence of plasma spraying parameters on properties of thermal barrier coatings. Mater Sci Technol. 2013;29(5):559–567. doi: 10.1179/1743284712Y.0000000193
   Web of Science ®Google Scholar
• Pakseresht AH, Javadi AH, Nejati M, et al. Statistical analysis and multiobjective optimization of process parameters in plasma spraying of partially stabilized zirconia. Int J Adv Manuf Technol. 2014;75:739–753. doi: 10.1007/s00170-014-6169-9
   Web of Science ®Google Scholar
• Katranidis V, Kamnis S, Allcock B, et al. Effects and interplays of spray angle and stand-off distance on the sliding wear behavior of HVOF WC-17Co coatings. J Therm Spray Technol. 2019;28:514–534. doi: 10.1007/s11666-019-00831-x
   Web of Science ®Google Scholar
• Wahab JA, Ghazali MJ, Baharin AFS. Microstructure and mechanical properties of plasma sprayed Al2O3–13%TiO2 ceramic coating. MATEC Web Conf. 2017;87.
   Google Scholar
• Nigam S, Mahapatra SS, Patel SK. Effect of stand-off distance in thermally sprayed copper coating. Surf Eng. 2019;35:826–832. doi: 10.1080/02670844.2019.1581690
   Web of Science ®Google Scholar
• Khandanjou S, Ghoranneviss M, Saviz S. The investigation of the microstructure behavior of the spray distances and argon gas flow rates effects on the aluminum coating using self-generated atmospheric plasma spray system. J Theory Appl Phys. 2017;11:225–234. doi: 10.1007/s40094-017-0256-x
   Web of Science ®Google Scholar
• Qin Y, Jiao Q, Zheng G, et al. Effects of spray distance on the microstructure and mechanical properties of reactive plasma sprayed TiCN coatings. Ceram Int. 2018 Oct;44(14):17230–17239. doi: 10.1016/j.ceramint.2018.06.181
   Web of Science ®Google Scholar
• Song EP, Ahn J, Lee S, et al. Effects of critical plasma spray parameter and spray distance on wear resistance of Al2O3–8 wt.%TiO2 coatings plasma-sprayed with nano powders. Surf Coat Technol. 2008;202:3625–3632. doi: 10.1016/j.surfcoat.2008.01.002
   Web of Science ®Google Scholar
• Azizpour MJ, Norouzi S, Majd HM. Effect of spray stand-off on hardness of thermally sprayed coatings. Int J Mech Mechatron Eng. 2012;6(1):334–336.
   Google Scholar
• Shilpa C, Mahesha K, Dey A, et al. Damping performance of alumina and zirconia-based plasma sprayed coatings. Surf Eng. 2019. https://doi.org/10.1080/02670844.2019.1662227.
   Web of Science ®Google Scholar
• Sachidananda KB, Mahesha K, Dey A. Effect of powder particle size on vibration damping behaviour of plasma sprayed alumina (Al2O3) coating on AISI 304 stainless steel substrate. Ceram Int. 2018 Jan;44(1):158–163. doi: 10.1016/j.ceramint.2017.09.153
   Web of Science ®Google Scholar
• Zulkifli ISM, Yajid MAM, Idris MH, et al. The effect of atmospheric plasma spray distance of the agglomerated maerogel coated on Inconel 625 substrate. Corros Eng Sci Technol. 2018;53(7):487–491. doi: 10.1080/1478422X.2017.1377990
   Web of Science ®Google Scholar
• Sahab ARM, Saad NH, Kasolang S, et al. Impact of plasma spray variables parameters on mechanical and wear behaviour of plasma sprayed AL2O3 3% wt. TiO2 coating in abrasion and erosion applications. Procedia Eng. 2012;41:1689–1695. doi: 10.1016/j.proeng.2012.07.369
   Google Scholar
• Du G, Li Z, Tan Z, et al. Damping performance of YSZ coating prepared by different EB-PVD parameters. Surf Eng. 2018;35:22–28. doi: 10.1080/02670844.2018.1446574
   Web of Science ®Google Scholar
• Pabst W, Gregorova W, Malangre D, et al. Elastic properties and damping behavior of alumina–zirconia composites at room temperature. Ceram Int. 2012;38(7):5931–5939. doi: 10.1016/j.ceramint.2012.04.045
   Web of Science ®Google Scholar
• Yu L, Ma Y. An interfacial damping model for hard coating structure. Adv Mater Res. 2011;314–316:191–196. doi: 10.4028/www.scientific.net/AMR.314-316.191
   Google Scholar
• Pakkirappa H, Mahesha K, Sachidananda KB. Vibration damping behavior and surface characterization of magneto-mechanical powder coated AISI304 stainless steel. Surf Coat Technol. 2017 Sept;324:382–389. doi: 10.1016/j.surfcoat.2017.06.005
   Web of Science ®Google Scholar
• Bommakanti A, Roy S, Suwas S. Effect of hypoeutectic boron modification on the dynamic properties of Ti-6Al-4V alloy. J Mater Res. July 2016;1:1–13.
   Google Scholar