References
- Ping X-L, Fu H-G, Sun S-T, et al. Microstructure and performance of Nb-bearing Ni60A-Cr3C2 coatings manufactured by laser cladding. Surf Engr. doi:10.1080/02670844.2019.1631510.
- Zhang X, Chen Y, Liou F. Fabrication of SS316L-IN625 functionally graded materials by powder-fed directed energy deposition. Sci Technol Weldg Joing. 2019;24(5):504–516. doi:10.1080/13621718.2019.1589086.
- Tan JHK, Sing SL, Yeong WY. Microstructure modelling for metallic additive manufacturing: a review. Virtual Phys Prototyp. 2020;15(1):87–105. doi:10.1080/17452759.2019.1677345.
- Valente C, Morgado T, Sharma N. LASER cladding – a post processing technique for coating, repair and re-manufacturing. In: Gupta K, editor. Materials forming, machining and post processing. materials forming, machining and tribology. Cham: Springer; 2020. p. 231–249.
- Paul CP, Ganesh P, Mishra SK, et al. Investigating laser rapid manufacturing for Inconel-625 components. Opt Laser Technol. 2007;39:800–805. doi:10.1016/j.optlastec.2006.01.008.
- Dinda GP, Dasgupta AK, Mazumder J. Laser aided direct metal deposition of Inconel 625 superalloy: microstructural evolution and thermal stability. Mater Sci Eng A. 2009;509:98–104. doi:10.1016/j.msea.2009.01.009.
- Lorenzoni RA, Gasparini RP, dos Santos AC, et al. (2019) A study on the intergranular corrosion and pitting resistance of Inconel 625 coating by PTA-P. Corr Engr Sci Technol. 2019;54(1):62–74. doi:10.1080/1478422X.2018.1533677.
- Kim H-I, Park H-S, Koo J-M, et al. Welding characteristic evaluation of GMAW and laser cladding for the gas turbine 1st blade. Key Eng Mater. 2007;353–358:519–522. doi:10.4028/www.scientific.net/KEM.353-358.519.
- Jeyaprakash N, Yang CH, Tseng SP. Characterization and tribological evaluation of NiCrMoNb and NiCrBSiC laser cladding on near-α titanium alloy, Int J Adv Manuf Technol. 2019. doi:10.1007/s00170-019-04755-2.
- Liu Y, Weng F, Bi G, et al. Characterization of wear properties of the functionally graded material deposited on cast iron by laser-aided additive manufacturing. Int J Adv Manuf Technol. 2019;105:4097–4105. doi:10.1007/s00170-019-03414-w.
- Montgomery C, Beuth J, Sheridan L, et al. Process mapping of Inconel 625 in laser powder bed additive manufacturing. In Bourell D, editor. Proceedings of the 26th Annual Solid Freefsorm Fabrication Symposium; 2015 Aug 10–12; Austin, TX, USA; p. 1195–1204. Available from: https://sffsymposium.engr.utexas.edu/sites/default/files/2015/2015-97-Montgomery.pdf.
- Abioye TE, Farayibi PK, Clare AT. A comparative study of Inconel 625 laser cladding by wire and powder feedstock. Mater Manuf Process. 2017;32:1653–1659. doi:10.1080/10426914.2017.1317787.
- Bonifaz EA, Conde JM, Czekanski A. Determination of secondary dendrite arm spacing for in-738LC gas-tungsten-arc-welds. J Mult Modelling. 2019;10(4):1850012. doi:10.1142/S1756973718500129.
- Olakanmi EO. Direct selective laser sintering of aluminium alloy powders [dissertation]. Leeds: University of Leeds; 2008. Available from: http://etheses.whiterose.ac.uk/id/eprint/1476.
- Zhang Z, Kovacevic R. Multi-response optimization of laser cladding steel + VC using grey relational analysis in the Taguchi method. J Mater. 2016;68:1762–1773. doi:10.1007/s11837-016-1942-x.
- Goodarzi DM, Pekkarinen J, Salminen A. Effect of process parameters in laser cladding on substrate melted areas and the substrate melted shape. J Laser Appl. 2015;27:S29201. doi:10.2351/1.4906376.
- Limmaneevichitr C, Kou S. Visualization of marangoni convection in simulated weld pools containing a surface-active agent. Weld J. 2000;79:324s–330s. https://www.academia.edu/3058526/Visualization_of_Marangoni_convection_in_simulated_weld_pools.
- Lange DF, De Hofman JT, Meijer J. Influence of intensity distribution on the meltpool and clad shape for laser cladding. In: Beyer E, Dausinger F, Ostendorf A, et al., editors. Proceedings of the Third International WLT-Conference on Lasers in Manufacturing; 2005 Jun 1–5; Munich, Stuttgart, Germany: AT-Fachverlag GmbH Stuttgart. p. 323–327. Available from: https://research.utwente.nl/en/publications/influence-of-intensity-distribution-on-the-meltpool-and-clad-shap.
- Yang Y, Jiang ZP, Li HZ. Effect of co-based alloy on properties of laser cladding layer. IOP Conf Ser Mater Sci Eng. 2017;265:012021. doi:10.1088/1757-899X/265/1/012021.
- Liu H, Hu Z, Qin X, et al. Parameter optimization and experimental study of the sprocket repairing using laser cladding. Int J Adv Manuf Technol. 2017;91:3967–3975. doi:10.1007/s00170-017-0066-y.
- Lian G, Yao M, Zhang Y, et al. Analysis and prediction on geometric characteristics of multi-track overlapping laser cladding. Int J Adv Manuf Technol. 2018;97:2397–2407. doi:10.1007/s00170-018-2107-6.
- Olakanmi EO, Oladijo OP, Obadele BA. The role of deposition temperature and scanning speed in the functional performance of laser assisted cold sprayed (LACS) coatings. Paper presented at: Cold spray 2 (Keynote). XXX International Conference on Surface Modification Technologies (SMT30); 2016 Jun 29–Jul 1; Milan, Italy.
- Ahmed N, Bakare MS, McCartney DG, et al. The effects of microstructural features on the performance gap in corrosion resistance between bulk and HVOF sprayed Inconel 625. Surf Coat Technol. 2010;204:2294–2301. doi: 10.1016/j.surfcoat.2009.12.028
- Abioye TE, McCartney DG, Clare AT. Laser cladding of Inconel 625 wire for corrosion protection. J Mater Process Technol. 2015;217:232–240. doi: 10.1016/j.jmatprotec.2014.10.024
- Li X, Liu Z, Wang Y. Microstructure and corrosion properties of laser cladding MoNi based alloy coatings. China Technol Sci. 2014;57:980–989. doi:10.1007/s11431-014-5512-6.