145
Views
0
CrossRef citations to date
0
Altmetric
Research Articles

The modulation of the TiAlSiN coating on the band gap of monolayer MoS2

, , &
Pages 505-513 | Received 09 Feb 2020, Accepted 22 Jun 2020, Published online: 10 Aug 2020

References

  • Liu D, Guo Y, Fang L, et al. Sulfur vacancies in monolayer MoS2 and its electrical contacts. Appl Phys Lett. 2013;103(18):183113. doi: 10.1063/1.4824893
  • Laishram R, Praveen S, Guisan M, et al. Structural properties of MoS2 layers grown by CVD technique. Integr Ferroelectr. 2018;194(1):16–20. doi: 10.1080/10584587.2018.1514889
  • Sun S, Chen J, Wang Y, et al. Structural sensitivity of MoS2-based films in solid space lubrication. Surf Eng. 2020;36(1):106–113. doi: 10.1080/02670844.2019.1625999
  • Li F, Gao F, Xu M, et al. Tuning transport and photoelectric performance of monolayer MoS2 device by e-beam irradiation. Adv Mater Interfaces. 2018;5(14):1800348. doi: 10.1002/admi.201800348
  • Chen Y, Wang J, Chen M. Enhancing the machining performance by cutting tool surface modifications: a focused review. Mach Sci Technol. 2019;23(3):477–509. doi: 10.1080/10910344.2019.1575412
  • Ou Y, Chen H, Li Z, et al. Microstructure and tribological behavior of TiAlSiN coatings deposited by deep oscillation magnetron sputtering. J Am Ceram Soc. 2018;101(11):5166–5176. doi: 10.1111/jace.15769
  • Sun D, Liu H, Zeng X, et al. Effect of Al content on microstructure and mechanical property of nanocomposite TiAlSiN thin films. J Nanosci Nanotechnol. 2019;19(1):199–205. doi: 10.1166/jnn.2019.16458
  • Li G, Sun J, Xu Y, et al. Microstructure, mechanical properties, and cutting performance of TiAlSiN multilayer coatings prepared by HiPIMS. Surf Coat Technol. 2018;353:274–281. doi: 10.1016/j.surfcoat.2018.06.017
  • Niu Y, Gonzalez-Abad S, Frisenda R, et al. Thickness-dependent differential reflectance spectra of monolayer and few-layer MoS2, MoSe2, WS2 and WSe2. Nanomaterials. 2018;8(9):725. doi: 10.3390/nano8090725
  • Carrascoso F, Lin D-Y, Frisenda R, et al. Biaxial strain tuning of interlayer excitons in bilayer MoS2. J Phys Mater. 2019;3(1):015003. doi: 10.1088/2515-7639/ab4432
  • Lee G, Pearton SJ, Ren F, et al. Two-dimensionally layered p-black phosphorus/n-MoS2/p-black phosphorus heterojunctions. ACS Appl Mater Interfaces. 2018;10(12):10347–10352. doi: 10.1021/acsami.7b19334
  • Bhandari S, Wang K, Watanabe K, et al. Imaging quantum dot formation in MoS2 nanostructures. Nanotechnology. 2018;29(42):42LT03. doi: 10.1088/1361-6528/aad79f
  • Han X, Lin J, Liu J, et al. Effects of hexagonal boron nitride encapsulation on the electronic structure of few-layer MoS2. J Phys Chem C. 2019;123(23):14797–14802. doi: 10.1021/acs.jpcc.9b02549
  • Zhang Z, De Palma AC, Brennan CJ, et al. Probing nanoscale variations in strain and band structure of MoS2 on Au nanopyramids using tip-enhanced Raman spectroscopy. Phys Rev B. 2018;97(8):085305. doi: 10.1103/PhysRevB.97.085305
  • Jin K, Dameng L, Tian Y. Enhancing the interlayer adhesive force in twisted multilayer MoS2 by thermal annealing treatment. Nanotechnology. 2015;26(40):405708. doi: 10.1088/0957-4484/26/40/405708
  • Jin K, Xie L, Tian Y, et al. Au-modified monolayer MoS2 sensor for DNA detection. J Phys Chem C. 2016;120(20):11204–11209. doi: 10.1021/acs.jpcc.6b01193
  • Su K, Liu D, Pang H, et al. Improvement on thermal stability of TiAlSiN coatings deposited by IBAD. Surf Eng. 2018;34(7):504–510. doi: 10.1080/02670844.2017.1341110
  • Takahashi K, Takahashi L, Miyazato I, et al. Searching for hidden perovskite materials for photovoltaic systems by combining data science and first principle calculations. ACS Photonics. 2018;5(3):771–775. doi: 10.1021/acsphotonics.7b01479
  • Ben-Melech Stan G, Caspary Toroker M. On the nature of trapped states in an MoS2 two-dimensional semiconductor with sulfur vacancies. Mol Phys. 2019;117(15–16):2058–2068. doi: 10.1080/00268976.2019.1576931
  • Xu Y, Li Y, Chen X, et al. First-principle study of hydrogenation on monolayer MoS2. AIP Adv. 2016;6(7):075001. doi: 10.1063/1.4955430
  • Phuc HV, Hieu NN, Hoi BD, et al. Tuning the electronic properties, effective mass and carrier mobility of MoS2 monolayer by strain engineering: first-principle calculations. J Electron Mater. 2018;47(1):730–736. doi: 10.1007/s11664-017-5843-8
  • Clark SJ, Segall MD, Pickard CJ, et al. First principles methods using CASTEP. Z Krist Cryst Mater. 2005;220(5/6):567–570.
  • Segall M, Lindan PJ, Probert MA, et al. First-principles simulation: ideas, illustrations and the CASTEP code. J Phys Condens Matter. 2002;14(11):2717. doi: 10.1088/0953-8984/14/11/301
  • Cao K, Lambert H, Radaelli PG, et al. Ab initio calculation of spin fluctuation spectra using time-dependent density functional perturbation theory, plane waves, and pseudopotentials. Phys Rev B. 2018;97(2):024420. doi: 10.1103/PhysRevB.97.024420
  • Gillani S, Ahmad R, Rizwan M, et al. Effect of magnesium doping on band gap and optical properties of SrZrO3 perovskite: a first-principles study. Optik. 2019;191:132–138. doi: 10.1016/j.ijleo.2019.05.099
  • Shahi C, Sun J, Perdewo JP. Accurate critical pressures for structural phase transitions of group IV, III-V, and II-VI compounds from the SCAN density functional. Phys Rev B. 2018;97(9):094111. doi: 10.1103/PhysRevB.97.094111
  • Arshad Javid M, Khan ZU, Mehmood Z, et al. Structural, electronic and optical properties of LiNbO3 using GGA-PBE and TB-mBJ functionals: a DFT study. Int J Mod Phys B. 2018;32(14):1850168. doi: 10.1142/S0217979218501680

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.