Effect of laser remelting treatment on Al₈₅Ni₈Y₄Ce₃ amorphous coating

References

• Greer A, Rutherford K, Hutchings I. Wear resistance of amorphous alloys and related materials. Int Mater Rev. 2002;47(2):87–112. doi: 10.1179/095066001225001067
   Web of Science ®Google Scholar
• Buschow K. Short-range order and thermal stability in amorphous alloys. J Phys F Met Phys. 1984;14(3):593–607. doi: 10.1088/0305-4608/14/3/005
   Google Scholar
• Qiao J, Wang Q, Pelletier J, et al. Structural heterogeneities and mechanical behavior of amorphous alloys. Prog Mater Sci. 2019;104:250–329. doi: 10.1016/j.pmatsci.2019.04.005
   Web of Science ®Google Scholar
• Bi H, Inoue A, Han F, et al. Novel deformation-induced polymorphic crystallization and softening of Al-based amorphous alloys. Acta Mater. 2018;147:90–99. doi: 10.1016/j.actamat.2018.01.016
   Web of Science ®Google Scholar
• Cheng J, Feng Y, Yan C, et al. Development and characterization of Al-based amorphous coating. JOM. 2020;72(2):745–753. doi: 10.1007/s11837-019-03966-y
   Web of Science ®Google Scholar
• Zhang L, Zhang S, Ma A, et al. Thermally induced structure evolution on the corrosion behavior of Al-Ni-Y amorphous alloys. Corros Sci. 2018;144:172–183. doi: 10.1016/j.corsci.2018.08.046
   Web of Science ®Google Scholar
• Nykyruy Y, Mudry S, Kulyk Y, et al. Structure and phase transformations of amorphous-nanocrystalline Al-based alloy. Appl Nanosci. 2020: 1–9. https://doi.org/10.1007/s13204-020-01340-y
   Web of Science ®Google Scholar
• Zhang T, Inoue A. Thermal and mechanical properties of Ti–Ni–Cu–Sn amorphous alloys with a wide supercooled liquid region before crystallization. Mater Trans JIM. 1998;39(10):1001–1006. doi: 10.2320/matertrans1989.39.1001
   Web of Science ®Google Scholar
• Hertsyk O, Kovbuz M, Boichyshyn L, et al. Influence of alloying on the corrosion resistance of bulk amorphous alloys based on iron. Mater Sci. 2017;53(3):330–336. doi: 10.1007/s11003-017-0079-6
   Web of Science ®Google Scholar
• Paul T, Singh A, Harimkar SP. Densification and crystallization in Fe-based bulk amorphous alloy spark plasma sintered in the supercooled liquid region. Adv Eng Mater. 2017;19(8):1700224. doi: 10.1002/adem.201700224
   Web of Science ®Google Scholar
• Krasnowski M. Bulk amorphous and nanocrystalline Al60Fe20Ti20 and Al65Fe18Ti12Ni5 alloys. Mater Lett. 2019;239:113–115. doi: 10.1016/j.matlet.2018.12.090
   Web of Science ®Google Scholar
• Zhang L-C, Chen L-Y, Wang L. Surface modification of titanium and titanium alloys: technologies, developments and future interests. Adv Eng Mater. 2020;22(5):1901258. doi: 10.1002/adem.201901258
   Web of Science ®Google Scholar
• Lu G, Liu H, Lin C, et al. Improving the fretting performance of aero-engine tenon joint materials using surface strengthening. Mater Sci Technol. 2019;35(15):1781–1788. doi: 10.1080/02670836.2019.1650445
   Web of Science ®Google Scholar
• Shen Y, Perepezko J. Al-based amorphous alloys: glass-forming ability, crystallization behavior and effects of minor alloying additions. J Alloys Compd. 2017;707:3–11. doi: 10.1016/j.jallcom.2016.11.079
   Web of Science ®Google Scholar
• Liu L, Zhang C. Fe-based amorphous coatings: structures and properties. Thin Solid Films. 2014;561:70–86. doi: 10.1016/j.tsf.2013.08.029
   Web of Science ®Google Scholar
• Tan C, Zhu H, Kuang T, et al. Laser cladding Al-based amorphous-nanocrystalline composite coatings on AZ80 magnesium alloy under water cooling condition. J Alloys Compd. 2017;690:108–115. doi: 10.1016/j.jallcom.2016.08.082
   Web of Science ®Google Scholar
• Tan Z, Wang L, Xue Y, et al. High-entropy alloy particle reinforced Al-based amorphous alloy composite with ultrahigh strength prepared by spark plasma sintering. Mater Design. 2016;109:219–226. doi: 10.1016/j.matdes.2016.07.086
   Web of Science ®Google Scholar
• Zhang ZB, Liang XB, Chen YX, et al. The preparation and corrosion resistance of Al–Ni–Y–Co amorphous and nanocrystalline composite coating. Mater Corros. 2014;65(9):919–925. doi: 10.1002/maco.201206934
   Web of Science ®Google Scholar
• Das B, Bandyopadhyay P, Nath A. An investigation on corrosion resistance and mechanical properties of laser remelted flame sprayed coating. Adv Mat Process Technol. 2018;4(4):660–668.
   Google Scholar
• Liu M, Chen D, Wang Y, et al. Effects of yttrium on the oxidation behavior of 304 stainless steel with coating by laser remelting in high temperature water. Mater Res Express. 2020;7(1):016421. doi: 10.1088/2053-1591/ab6803
   Web of Science ®Google Scholar
• Maurya RS, Sahu A, Laha T. Quantitative phase analysis in Al86Ni8Y6 bulk glassy alloy synthesized by consolidating mechanically alloyed amorphous powder via spark plasma sintering. Mater Des. 2016;93:96–103. doi: 10.1016/j.matdes.2015.12.129
   Web of Science ®Google Scholar
• Jiali Z, Dejun K. Corrosion wear and electrochemical corrosion behaviors of laser cladded amorphous FeSiB coating in 3.5% NaCl solution. Mater Res Express. 2018;6(3):035203. doi: 10.1088/2053-1591/aaf48b
   Web of Science ®Google Scholar
• Shankar AR, Mudali UK. Laser surface modification of plasma sprayed yttria stabilised zirconia coatings on type 316L stainless steel. Surf Eng. 2009;25(3):241–248. doi: 10.1179/174329408X326434
   Web of Science ®Google Scholar
• Xu J, Zhou J, Tan W, et al. Ultrasonic vibration on wear property of laser cladding Fe-based coating. Surf Eng. 2018: 1–9. https://doi.org/10.1080/02670844.2018.1475102
   Web of Science ®Google Scholar