References
- Joshi SS, Katakam S, Singh Arora H, et al. Amorphous coatings and surfaces on structural materials. Crit Rev Solid State. 2015;41(1):1–46. doi:10.1080/10408436.2015.1053602.
- Li FC, Liu T, Zhang JY, et al. Amorphous–nanocrystalline alloys: fabrication, properties, and applications. Materials Today Adv. 2019;4:100027), doi:10.1016/j.mtadv.2019.100027.
- Yang B, Liu CT, Nieh TG. Unified equation for the strength of bulk metallic glasses. Appl Phys Lett. 2006;88(22):221911, doi:10.1063/1.2206099.
- Ziewiec K, Wojciechowska M, Prusik K, et al. Amorphous/crystalline Fe55Ni20Cu5P10Si5B5 composite produced by two-component melt-spinning. Mater Sci Tech Lond. 2019: 1–7. doi:10.1080/02670836.2019.1603900.
- Jang BT, Kim YI. Effects of Cr or Mo compositions on mechanical behavior of Fe-Base bulk amorphous alloy. Adv Mat Res. 2015;1110:136–141. doi:10.4028/www.scientific.net/amr.1110.136.
- Chau JLH, Hou Y-Y, Pan AI-T, et al. Fabrication of high hardness and corrosion resistance coatings from Fe-based alloy powders. Particul Sci Technol. 2016;35(2):209–213. doi:10.1080/02726351.2016.1150369.
- Kasturi H, Paul T, Biswas S, et al. Sliding wear behavior of spark-plasma-sintered Fe-based amorphous alloy coatings on Cu-Ni alloy. J Mater Eng Perform. 2018;27(7):3629–3635. doi:10.1007/s11665-018-3470-z.
- Fu B-Y, He D-Y, Zhao L-D, et al. Microstructure and properties of arc sprayed coatings containing Fe based amorphous phase and nanocrystallites. Surf Eng. 2009;25(4):333–337. doi:10.1179/026708409x396060.
- Henao J, Concustell A, Cano IG, et al. Influence of cold Gas spray process conditions on the microstructure of Fe-based amorphous coatings. J Alloys Compd. 2015;622:995–999. doi:10.1016/j.jallcom.2014.11.037.
- Choi SJ, Lee HS, Jang JW, et al. Corrosion behavior in a 3.5 wt% NaCl solution of amorphous coatings prepared through plasma-spray and cold-spray coating processes. Met Mater Int. 2014;20(6):1053–1057. doi:10.1007/s12540-014-6008-4.
- Henao J, Concustell A, Dosta S, et al. Influence of the substrate on the formation of metallic glass coatings by cold gas spraying. J Therm Spray Technol. 2016;25(5):992–1008. doi:10.1007/s11666-016-0419-3.
- Lee KA, Jung DJ, Park DY, et al. Study on the fabrication and physical properties of cold-sprayed, Cu-based amorphous coating. J Phys Conf Ser. 2009;144:012113), doi:10.1088/1742-6596/144/1/012113.
- Ji X, Wang H, Bao Y, et al. Wear resistance of CuZr-based amorphous-forming alloys against bearing steel in 3.5% NaCl solution. Philos Mag. 2017;97(32):3042–3054. doi:10.1080/14786435.2017.1364440.
- Shao Z, Zhang A, Wang F. Microstructure evolution and mechanical properties of Nb-alloyed Cu-Zr-Al-Ni large-sized metallic glass composites. Mater Sci Tech Lond. 2019: 1–7. doi:10.1080/02670836.2019.1658439.
- Sahoo KL, Sahu R, Mitra A. Kinetic Aspects of the Nanocrystallization and evolution of microhardness in Al92−XNi8LaXAmorphous alloys. Mater Manuf Process. 2007;22(4):497–501. doi:10.1080/10426910701236007.
- Sviridova EA, Maksimov VV, Rassolov SG, et al. Influence of the chemical composition of Al-based amorphous alloys on thermally induced embrittlement. Phys Solid State. 2014;56(7):1355–1362. doi:10.1134/s1063783414070312.
- Guo W, Wu Y, Zhang J, et al. Fabrication and characterization of thermal-sprayed Fe-based amorphous/nanocrystalline composite coatings: an overview. J Therm Spray Technol. 2014;23(7):1157–1180. doi:10.1007/s11666-014-0096-z.
- Varadaraajan V, Guduru RK, Mohanty PS. Synthesis and microstructural evolution of amorphous/nanocrystalline steel coatings by different thermal-spray processes. J Therm Spray Technol. 2013;22(4):452–462.
- Kumar A, Nayak SK, Bijalwan P, et al. Mechanical and corrosion properties of plasma-sprayed Fe-based amorphous/nanocrystalline composite coating. Adv Mater Process Technol. 2019: 1–7. doi:10.1007/s11666-013-9885-z.
- Huang B, Zhang C, Zhang G, et al. Wear and corrosion resistant performance of thermal-sprayed Fe-based amorphous coatings: a review. Surf Coat Technol. 2019;377:124896), doi:10.1016/j.surfcoat.2019.124896.
- Paul T, Singh A, Littrell KC, et al. Crystallization mechanism in spark plasma sintered bulk metallic glass analyzed using small angle neutron scattering. Sci Rep. 2020;10:2033.
- Guo Y, Koga GY, Jorge AM, et al. Microstructural investigation of FeCrNbB amorphous/nanocrystalline coating produced by HVOF. Mater Des. 2016;111:608–615. doi:10.1016/j.matdes.2016.09.027.
- Koga GY, Schulz R, Savoie S, et al. Microstructure and wear behavior of Fe-based amorphous HVOF coatings produced from commercial precursors. Surf Coat Technol. 2017;309:938–944. doi:10.1016/j.surfcoat.2016.10.057.
- Moridi A, Hassani-Gangaraj SM, Guagliano M, et al. Cold spray coating: review of material systems and future perspectives. Surf Eng. 2014;30(6):369–395. doi:10.1179/1743294414y.0000000270.
- Tabbara H, Gu S, McCartney DG, et al. Study on process optimization of cold gas spraying. J Therm Spray Technol. 2010;20(3):608–620. doi:10.1007/s11666-010-9564-2.
- Singh H, Sidhu TS, Kalsi SBS, et al. Development of cold spray from innovation to emerging future coating technology. J Braz Soc Mech Sci Eng. 2013;35(3):231–245. doi:10.1007/s40430-013-0030-1.
- Villafuerte J. Current and future applications of cold spray technology. Met Finish. 2010;108(1):37–39. doi:10.1016/s0026-0576(10)80005-4.
- Villafuerte J. Recent trends in cold spray technology: looking at the future. Surf Eng. 2010;26(6):393–394. doi:10.1179/026708410x12687356948715.
- Champagne V, Kaplowitz D, Champagne VK, et al. Dissimilar metal joining and structural repair of ZE41A-T5 cast magnesium by the cold spray (CS) process. Mater Manuf Process. 2017;33(2):130–139. doi:10.1080/10426914.2016.1257137.
- Huang G, Wang H. Li X, et al. deposition efficiency of low pressure cold sprayed aluminum coating. Mater Manuf Process. 2017;33(10):1100–1106. doi:10.1080/10426914.2017.1415443.
- Walker M. Microstructure and bonding mechanisms in cold spray coatings. Mater Sci Technol. 2018: 1–21. doi:10.1080/02670836.2018.1475444.
- Li WY, Yang K, Yin S, et al. Numerical analysis of cold spray particles impacting behavior by the Eulerian method: a review. J Therm Spray Technol. 2016;25(8):1441–1460. doi:10.1007/s11666-016-0443-3.
- Rokni MR, Nutt SR, Widener CA, et al. Review of relationship between particle deformation, coating microstructure, and properties in high-pressure cold spray. J Therm Spray Technol. 2017;26(6):1308–1355. doi:10.1007/s11666-017-0575-0.
- Ziemian CW, Wright WJ, Cipoletti DE. Influence of impact conditions on feedstock deposition behavior of cold-sprayed Fe-based metallic glass. J Therm Spray Technol. 2018;27(5):843–856. doi:10.1007/s11666-018-0720-4.
- Su J, Kang J, Yue W, et al. Review of cold spraying and its use for metallic glass coatings. Mater Sci Tech Lond. 2019: 1–16. doi:10.1080/02670836.2019.1654240.
- Wong W, Vo P, Irissou E, et al. Effect of particle morphology and size distribution on cold-sprayed pure titanium coatings. J Therm Spray Technol. 2013;22(7):1140–1153. doi:10.1007/s11666-013-9951-6.
- Jiang C, Liu W, Wang G, et al. The corrosion behaviours of plasma-sprayed Fe-based amorphous coatings. Surf Eng. 2017;34(8):634–639. doi:10.1080/02670844.2017.1319647.
- Cheng J, Zhang Q, Feng Y, et al. Microstructure and sliding wear behaviors of plasma-sprayed Fe-based amorphous coatings in 3.5 wt.% NaCl solution. J Therm Spray Technol. 2019;28:1049–1059. doi:10.1007/s11666-019-00866-0.
- Katakam S, Santhanakrishnan S, Dahotre NB. Fe-based amorphous coatings on AISI 4130 structural steel for corrosion resistance. JOM. 2012;64(6):709–715. doi:10.1007/s11837-012-0338-9.
- Zhou Y, Ma G, Wang H, et al. Microstructures and tribological properties of Fe-based amorphous metallic coatings deposited via supersonic plasma spraying. J Therm Spray Technol. 2017;26(6):1257–1267. doi:10.1007/s11666-017-0582-1.
- Wang L, Wang J, Sun M. Mechanical properties of Fe-based bulk amorphous Fe41Co7Cr15Mo14C15B6Y2 alloy rods. Chem Phys Lett. 2020;750:137511), doi:10.1016/j.cplett.2020.137511.
- Hou X, Du D, Wang K, et al. Microstructure and wear resistance of Fe-Cr-Mo-Co-C-B amorphous composite coatings synthesized by laser cladding. Metals (Basel). 2018;8(8):622), doi:10.3390/met8080622.
- Huang R, Sone M, Ma W, et al. The effects of heat treatment on the mechanical properties of cold-sprayed coatings. Surf Coat Technol. 2015;261:278–288. doi:10.1016/j.surfcoat.2014.11.017.
- Ma HR, Li JW, Chang CT, et al. Passivation behavior of Fe-based amorphous coatings prepared by high-velocity air/oxygen Fuel processes. J Therm Spray Technol. 2017;26(8):2040–2047. doi:10.1007/s11666-017-0647-1.
- Paul T, Alavi SH, Biswas S, et al. Microstructure and wear behavior of laser clad multi-layered Fe-based amorphous coatings on steel substrates. Lasers Manuf Mater Process. 2015;2(4):231–241. doi:10.1007/s40516-015-0017-0.
- Khun NW, Tan AWY, Bi KJW, et al. Effects of working gas on wear and corrosion resistances of cold sprayed Ti-6Al-4V coatings. Surf Coat Technol. 2016;302:1–12. doi:10.1016/j.surfcoat.2016.05.052.
- Cavaliere P, Silvello A. Finite element analyses of pure Ni cold spray particles impact related to coating crack behaviour. Surf Eng. 2017;34(5):361–368. doi:10.1080/02670844.2017.1287555.
- Ma HR, Li JW, Jiao J, et al. Wear resistance of Fe-based amorphous coatings prepared by AC-HVAF and HVOF. Mater Sci Technol. 2016;33(1):65–71. doi:10.1080/02670836.2016.1160195.
- Ma HR, Chen XY, Li JW, et al. Fe-based amorphous coating with high corrosion and wear resistance. Surf Eng. 2016;33(1):56–62. doi:10.1080/02670844.2016.1176718.
- Zhang SD, Zhang WL, Wang SG, et al. Characterisation of three-dimensional porosity in an Fe-based amorphous coating and its correlation with corrosion behaviour. Corr Sci. 2015;93:211–221. doi:10.1016/j.corsci.2015.01.022.
- Zhang SD, Wu J, Qi WB, et al. Effect of porosity defects on the long-term corrosion behaviour of Fe-based amorphous alloy coated mild steel. Corr Sci. 2016;110:57–70. doi:10.1016/j.corsci.2016.04.021.