Nitriding behaviour of Mg-Li alloy with surface mechanical nano-alloying pretreatment

References

• Gray JE, Luan B. Protective coatings on magnesium and its alloys-a critical review. J Alloy Comp. 2002;336:88–113.
   Web of Science ®Google Scholar
• Tang S, Xin TZ, Xu WQ, et al. Precipitation strengthening in an ultralight magnesium alloy. Nat Commun. 2019;10:1–8.
   PubMed Web of Science ®Google Scholar
• Li ZJ, Kuang Q, Dong XL, et al. Characteristics of high-performance anti-corrosion/anti-wear ceramic coatings on magnesium-lithium alloy by plasma electrolytic oxidation surface engineering. Surf Coat Technol. 2019;375:600–607.
   Web of Science ®Google Scholar
• Xu WQ, Birbilis N, Sha G, et al. A high-specific-strength and corrosion-resistant magnesium alloy. Nat Mater. 2015;14:1229–1235.
   PubMed Web of Science ®Google Scholar
• Rickerby DS, Bellamy BA, Jones A M. Internal Stress and microstructure of titanium nitride coatings. Surf Eng. 1987;3:138–146.
   Google Scholar
• Shin HG, Jeon S, Choi Y, et al. Degradation behaviour of TiN and TiCN coatings after laser ablation. Surf Eng. 2014;30:142–147.
   Web of Science ®Google Scholar
• Tan CL, Zhou KS, Kuang TC, et al. Novel performances of in situ plasma nitriding-PVD duplex-treated nanocrystalline TiN coatings. Surf Eng. 2018;34:520–526.
   Web of Science ®Google Scholar
• Belov DS, Blinkov IV, Volkhonskii AO. The effect of Cu and Ni on the nanostructure and properties of arc-PVD coatings based on titanium nitride. Surf Coat Technol. 2014;260:186–197.
   Web of Science ®Google Scholar
• Cui XJ, Ping J, Zhang YJ, et al. Structure and properties of newly designed MAO/TiN coating on AZ31B Mg alloy. Surf Coat Technol. 2017;328:319–325.
   Web of Science ®Google Scholar
• Mei LY, Sun J, Li Y, et al. Fabrication of composite modified layer on aluminium alloy by surface mechanical nano-alloying combined with nitriding. Appl Surf Sci. 2020;499:143915.
   Web of Science ®Google Scholar
• Chen K, Yang HM, Gao JS, et al. Microstructure detection of Mg-Zi-Ti-Si amorphous composite coating prepared by SMAT. Mater Charact. 2018;135:265–269.
   Web of Science ®Google Scholar
• Zuo M, Zhao DG, Wang ZQ, et al. Investigation on WC-Al composite coatings of AZ91 alloy by mechanical alloying. Mater Sci Technol. 2014;31:1051–1057.
   Web of Science ®Google Scholar
• Fabijanic D, Taylor A, Ralston K, et al. Influence of surface mechanical attrition treatment attrition media on the surface contamination and corrosion of magnesium. Corrosion. 2012;69:527–535.
   Web of Science ®Google Scholar
• Zadorozhnyy VY, Shahzad A, Pavlov MD, et al. Synthesis of the Ni-Al coatings on different metallic substrates by mechanical alloying and subsequent laser treatment. J Alloys Compd. 2017;707:351–357.
   Web of Science ®Google Scholar
• Chuang WS, Cai YC, Huang JC, et al. Surface hardness improvement of Al via inserting ceramic powders by ultrasonic mechanical coating and armoring with subsequent annealing. Surf Coat Technol. 2018;340:145–150.
   Web of Science ®Google Scholar
• Révész Á, Takacs L. Coating a Cu plate with a Zr-Ti powder mixture using surface mechanical attrition treatment. Surf Coat Technol. 2009;203:3026–3031.
   Web of Science ®Google Scholar
• Révész Á, Takacs L. Coating metals by surface mechanical attrition treatment. J Alloy Comp. 2007;441:111–114.
   Web of Science ®Google Scholar
• Yao QT, Sun J, Zhu YJ, et al. TiO2 coating prepared by mechanical alloying treatment for photocatalytic degradation. Surf Eng. 2019;35:927–932.
   Web of Science ®Google Scholar
• Chen C, Feng XM, Shen YF. Microstructure and mechanical properties of Ti-Cu amorphous coating synthesized on pure Cu substrate by mechanical alloying method. Rare Met. 2018. doi:10.1007/s12598-018-1115-x
   PubMed Web of Science ®Google Scholar
• Chen CL, Suprianto. Microstructure and mechanical properties of AlCuNiFeCr high entropy alloy coatings by mechanical alloying. Surf Coat Technol. 2020;386:125443.
   Web of Science ®Google Scholar
• Romankov S, Kaloshkin SD, Hayasaka Y, et al. Effect of process parameters on the formation of Ti-Al coatings fabricated by mechanical milling. J Alloy Comp. 2009;484:665–673.
   Web of Science ®Google Scholar
• Romankov S, Sha W, Kaloshkin SD. Fabrication of Ti-Al coatings by mechanical alloying method. Surf Coat Technol. 2006;201:3235–3245.
   Web of Science ®Google Scholar
• Spies H-J. Surface engineering of aluminium and titanium alloys: an overview. Surf Eng. 2010;26:126–134.
   Web of Science ®Google Scholar
• Sun J, Tong WP, Zuo L, et al. Low-temperature plasma nitriding of titanium layer on Ti/Al clad sheet. Mater Des. 2013;47:408–415.
   Web of Science ®Google Scholar
• Yao QT, Sun J, Shen DP, et al. Large-scale synthesis of nanostructured nitride layer on Ti plate using mechanical shot peening and low-temperature nitriding. Adv Eng Mater. 2017;19: 1700157.
   Web of Science ®Google Scholar
• Zhang FY, Yan MF. Microstructure and mechanical properties of multiphase layer formed during depositing Ti film followed by plasma nitriding on 2024 aluminum alloy. Appl Surf Sci. 2014;301:410–417.
   Web of Science ®Google Scholar
• Tong WP, Tao NR, Wang ZB, et al. Nitriding iron at lower temperatures. Science. 2003;299:686–688.
   PubMed Web of Science ®Google Scholar
• Zang CW, Liu JG, Tan CW, et al. Laser conduction welding characteristics of dissimilar metals Mg/Ti with Al interlayer. J Manuf Process. 2018;32:595–605.
   Web of Science ®Google Scholar
• Das SK, Kim YM, Ha TK, et al. Anisotropic diffusion behavior of Al in Mg: diffusion couple study using Mg single crystal. Metall Mater Trans A. 2013;44:2539–2547.
   Web of Science ®Google Scholar