Improving tribological properties of TC4 strengthened by tungsten using ESA

References

• Hayat MD, Singh H, He Z, et al. Titanium metal matrix composites: An overview. Compos Part A Appl Sci Manuf. 2019;121(121):418–438.
   Web of Science ®Google Scholar
• Welsch G, Boyer R, Collings E. Materials properties handbook: titanium alloys. Russell Township (US): ASM International; 1993.
   Google Scholar
• Leyens C, Peters M. Titanium and titanium alloys: fundamentals and applications. WeinHeim (Germany): Wiley-VCH Verlag GmbH & Co. KGaA; 2003.
   Google Scholar
• Li S, Sun B, Imai H, et al. Powder metallurgy titanium metal matrix composites reinforced with carbon nanotubes and graphite. Compos Part A Appl Sci Manuf. 2013;48(48):57–66.
   Web of Science ®Google Scholar
• Kuzumaki T, Ujiie O, Ichinose H, et al. Mechanical characteristics and preparation of carbon nanotube fiber-reinforced Ti composite. Adv Eng Mater. 2000;2(7):416–418.
   Web of Science ®Google Scholar
• Chang-bin T, Dao-xin L, Zhan W, et al. Electro-spark alloying using graphite electrode on titanium alloy surface for biomedical applications. Appl Surf Sci. 2011;257(15):6364–6371.
   Web of Science ®Google Scholar
• Zhang L, Chen L, Wang L. Surface modification of Titanium and Titanium alloys: technologies, developments, and future interests. Adv Eng Mater. 2020;22(5):2070017.
   Web of Science ®Google Scholar
• Weng F, Chen C, Yu H. Research status of laser cladding on titanium and its alloys: A review. Mater Des. 2014;58(58):412–425.
   Web of Science ®Google Scholar
• Abioye TE, Folkes J, Clare AT, et al. Concurrent inconel 625 wire and WC powder laser cladding: process stability and microstructural characterisation. Surf Eng. 2013;29(9):647–653.
   Web of Science ®Google Scholar
• Wu H, Liang L, Lan X, et al. Tribological and biological behaviors of laser cladded Ti-based metallic glass composite coatings. Appl Surf Sci. 2020;507(507):145104–145104.
   Web of Science ®Google Scholar
• Vadiraj A, Kamaraj M, Gnanamoorthy R. Fretting wear studies on PVD TiN coated, ion implanted and thermally oxidised biomedical titanium alloys. Surf Eng. 2007;23(3):209–215.
   Web of Science ®Google Scholar
• Du GY, Li ZL, Tan Z, et al. Damping performance of YSZ coating prepared by different EB-PVD parameters. Surf Eng. 2019;35(1):22–28.
   Web of Science ®Google Scholar
• Bao M, Xu X, Zhang H, et al. Tribological behavior at elevated temperature of multilayer TiCN/TiC/TiN hard coatings produced by chemical vapor deposition. Thin Solid Films. 2011;520(2):833–836.
   Web of Science ®Google Scholar
• Capote G, Bonetti L, Santos L, et al. Adherent amorphous hydrogenated carbon films on metals deposited by plasma enhanced chemical vapor deposition. Thin Solid Films. 2007;516(12):4011–4017.
   Web of Science ®Google Scholar
• Zhecheva A, Malinov S, Sha W. Microstructure and microhardness of gas nitrided surface layers in Ti–8Al–1Mo–1V and Ti–10V–2Fe–3Al alloys. Surf Eng. 2013;21(4):269–278.
   Web of Science ®Google Scholar
• Sun J, Tong W, Zuo L, et al. Low-temperature plasma nitriding of titanium layer on Ti/Al clad sheet. Mater Des. 2013;47(47):408–415.
   Web of Science ®Google Scholar
• Huang XN, Lang LH, Xu WC, et al. Surface carburizing during hot isostatic pressing. Surf Eng. 2018;34(12):954–957.
   Web of Science ®Google Scholar
• Kim H, Kim H, Lee B, et al. Atmosphere Gas carburizing for improved wear resistance of Pure Titanium fabricated by additive manufacturing. Mater Trans. 2017;58(4):592–595.
   Web of Science ®Google Scholar
• Burkov A, Chigrin P. Synthesis of Ti-Al intermetallic coatings via electrospark deposition in a mixture of Ti and Al granules technique. Surf Coat Technol. 2020;387(387):125550.
   Web of Science ®Google Scholar
• Tyagi R, Mahto N, Das A, et al. Preparation of MoS2+Cu coating through the EDC process and its analysis. Surf Eng. 2020;36(1):86–93.
   Web of Science ®Google Scholar
• Penyashki T, Radev D, Kandeva M, et al. Structural and tribological properties of wear resistant coatings obtained by electrospark deposition. IOP Conf Ser: Mater Sci Eng. 2020;724:012015.
   Google Scholar
• James R, Richard H, Lawrence B. Electro-spark deposition. Adv Mater Process 2003;161(3):35–35.
   Web of Science ®Google Scholar
• Agarwal A, Dahotre N. Synthesis of boride coating on steel using high energy density processes. Mater Charact. 1999;42(1):31–44.
   Web of Science ®Google Scholar
• Razavi Arab S, Aghajani H. Wear behavior of Pure Titanium coated With WC-Co by the Use of electrospark deposition method. J Tribol-Trans ASME. 2019;141(5):051605.
   Web of Science ®Google Scholar
• Tkachenko YG, Yurchenko DZ, Timofeeva II, et al. Effect from the composition of electrodes produced from TiC–(Fe–Cr–Al–Si) alloys on the formation, phase composition, and properties of wear- and oxidation-resistant Electrospark-Deposited Coatings on steel. Powder Metall Met Ceram. 2018;57(7–8):465–472.
   Web of Science ®Google Scholar
• Tkachenko Y, Yurchenko D, Britun V, et al. Electrospark-Deposited Coatings from titanium and tungsten carbide alloys: mass transfer kinetics, structurization, and properties. Powder Metall Met Ceram. 2015;54(5–6):309–317.
   Web of Science ®Google Scholar
• Pyachin S, Ershova T, Burkov A, et al. Preparation and properties of electrospark coatings from Ti3Al granules with silicon carbide and boron carbide additives. Lett Mater. 2019;9(2):191–196.
   Web of Science ®Google Scholar
• Hong X, Feng K, Tan Y, et al. Effects of process parameters on microstructure and wear resistance of TiN coatings deposited on TC11 titanium alloy by electrospark deposition. Trans Nonferrous Met Soc China. 2017;27(8):1767–1776.
   Web of Science ®Google Scholar
• Zhang H, Li D. Effects of sputtering condition on tribological properties of tungsten coatings. Wear. 2003;255(7):924–932.
   Web of Science ®Google Scholar
• Moreau C, Fargier-Richard P, Saint-Jacques R, et al. Thermal diffusivity of plasma-sprayed tungsten coatings. Surf Coat Technol. 1993;61(1–3):67–71.
   Web of Science ®Google Scholar
• García-Rosales C, Deschka S, Hohenauer W, et al. High-Heat-Flux loading of tungsten coatings on graphite Deposited by plasma spray and physical vapor deposition. Fusion Technol. 1997;32(2):263–275.
   Web of Science ®Google Scholar
• Kingswell R, Rickerby DS, Bull SJ, et al. Erosive wear of thermally sprayed tungsten coatings. Thin Solid Films. 1991;198(1–2):139–148.
   Web of Science ®Google Scholar
• Patowari P, Mishra U, Saha P, et al. Surface integrity of C-40 steel processed with WC-Cu Powder metallurgy green compact tools in EDM. Mater Manuf Processes. 2011;26(5):668–676.
   Web of Science ®Google Scholar
• Luo P, Dong S, Xie Z, et al. The effects of coating parameters on the quality of TiB2–TiC composite phase coating on the surface of Cu–Cr–Zr alloy electrode. Surf Coat Technol. 2014;253:132–138.
   Web of Science ®Google Scholar
• Uglov V, Kuleshov A, Soldatenko E, et al. Structure, phase composition and mechanical properties of hard alloy treated by intense pulsed electron beams. Surf Coat Technol. 2012;206(11–12):2972–2976.
   Web of Science ®Google Scholar
• Zhao LP, Liu ZD, Li B. Microstructure and grain abrasion properties of (Ti,W)C-Ni cermet cladding layers prepared by tungsten inert Gas cladding. Appl Mech Mater. 2011;1376(80–81):133–136.
   Google Scholar
• Liu Z, Ji F, Wang M, et al. Study on the tribological properties of porous titanium sliding against Tungsten Carbide YG6. Metals (Basel). 2017;7(1):28.
   Web of Science ®Google Scholar
• Jiang Y, Xie ZM, Yang JF, et al. High-temperature tribological behavior of tungsten. Int J Refract Met Hard Mater. 2019;84(84):104992.
   Web of Science ®Google Scholar