Surface properties and biocompatibility studies on bone plate by magnetorheological finishing

References

• Mediratta R, Ahluwalia K, Yeo SH. State-of-the-art on vibratory finishing in the aviation industry: an industrial and academic perspective. Int J Adv Manuf Technol. 2016;85(1–4):415–429.
   Web of Science ®Google Scholar
• Murray JW, Kinnell PK, Cannon AH, et al. Surface finishing of intricate metal mould structures by large-area electron beam irradiation. Precis Eng. 2013;37(2):443–450. DOI:10.1016/j.precisioneng.2012.11.007.
   Web of Science ®Google Scholar
• Nesli S, Yilmaz O. Surface characteristics of laser polished Ti-6Al-4V parts produced by electron beam melting additive manufacturing process. Int J Adv Manuf Technol. 2021 May 1;114(1–2):271–289. DOI:10.1007/s00170-021-06861-6.
   Web of Science ®Google Scholar
• Rajput AS, Kapil S, Das M. Methods for surface superfinishing of prosthesis. 2022;335–360. DOI:10.1007/978-981-16-3645-5_15.
   Google Scholar
• Tiwari T, Dvivedi A, Kumar P. Investigations on the fabrication of a patterned tool by chemical etching. Mater Manuf Processes. 2021;36(16):1840–1852. DOI:10.1080/10426914.2021.1926491.
   Web of Science ®Google Scholar
• Casarin SJ, De Angelo Sanchez LE, Bianchi EC, et al. Effect of burnishing on Inconel 718 workpiece surface heated by infrared radiation. Mater Manuf Processes. 2021;36(16):1853–1864. DOI:10.1080/10426914.2021.1926494.
   Web of Science ®Google Scholar
• Arunkumar K, Gopal PM, Kavimani V. Influence of basalt and graphene fillers and their hybridization on surface quality during AWJM process. Mater Manuf Processes. 2021;36(16):1887–1897. DOI:10.1080/10426914.2021.1945098.
   Web of Science ®Google Scholar
• Anburaj R, Pradeep Kumar M. Influences of cryogenic CO2 and LN2 on surface integrity of inconel 625 during face milling. Mater Manuf Processes. 2021;36(16):1829–1839. DOI:10.1080/10426914.2021.1914850.
   Web of Science ®Google Scholar
• Pekşen H, Kalyon A. Optimization and measurement of flank wear and surface roughness via taguchi based grey relational analysis. Mater Manuf Processes. 2021;36(16):1865–1874. DOI:10.1080/10426914.2021.1926497.
   Web of Science ®Google Scholar
• Bayat M, Amini S, Hadidi M. Effect of ultrasonic-assisted turning on geometrical tolerances in Al 2024-T6. Mater Manuf Processes. 2021;36(16):1875–1886. DOI:10.1080/10426914.2021.1926496.
   Web of Science ®Google Scholar
• Rajput AS, Das M, Kapil S. Characterization of wear resistance and corrosion during magnetorheological fluid assisted finishing (MFAF) of Ti-6Al-4V and duplex stainless steel for enhanced biocompatibility. Proc Inst Mech Eng E J Proc Mech Eng. 2022 Jun 22. DOI:10.1177/09544089221107990.
   Web of Science ®Google Scholar
• Rajput AS, Kapil S, Das M. Computational techniques for predicting process parameters in the magnetorheological fluid-assisted finishing process. Adv Comput Methods Mech Mater Eng. 2021 Oct 13: 125–146. Available from: https://www.taylorfrancis.com/chapters/edit/10.12019781003202233-10/computational-techniques-predicting-process-parameters-magnetorheological-fluid-assisted-finishing-process-atul-singh-rajput-sajan-kapil-manas-das.
   Google Scholar
• Rajput AS, Prasad D, Mondal AK, Bose D. 2D computational fluid dynamics analysis into rotational magnetorheological abrasive flow finishing (R-MRAFF) process. In: Li L, et al., editor. Advances in materials and manufacturing engineering. Singapore: Springer; 2020. p. 67–73.
   Google Scholar
• Singh A K, Jha S, Pandey PM. Nanofinishing of a typical 3D ferromagnetic workpiece using ball end magnetorheological finishing process. Int J Mach Tools Manuf. 2012 Dec 1;63:21–31.
   Web of Science ®Google Scholar
• Arora K, Singh K. Magnetorheological finishing of UHMWPE acetabular cup surface and its performance analysis. Mater Manuf Processes. 2020 Oct 25;35(14):1631–1649. DOI:10.1080/10426914.2020.1784928.
   Web of Science ®Google Scholar
• Kumar S, Jain VK, Sidpara A. Nanofinishing of freeform surfaces (knee joint implant) by rotational-magnetorheological abrasive flow finishing (R-MRAFF) process. Precis Eng. 2015;42:165–178. Available from: http://www.sciencedirect.com/science/article/pii/S0141635915000902.
   Web of Science ®Google Scholar
• Wan S, Wei C, Hu C, et al. Novel magic angle-step state and mechanism for restraining the path ripple of magnetorheological finishing. Int J Mach Tools Manuf. 2021 Feb 1;161:103673.
   Web of Science ®Google Scholar
• Rajput AS, Singh A, Kapil S, et al. Investigations on the toolpath strategies for CNC magnetorheological fluid assisted finishing (MFAF) process. Int J Adv Manuf Technol. 2022 May 23;121(1):949–966. DOI:10.1007/s00170-022-09307-9.
   Web of Science ®Google Scholar
• Nagdeve L, Jain VK, Ramkumar J. Development of inverse replica fixture for nano-finishing of knee joint using R-MRAFF process. J Micromanufacturing. 2019 May 12;2(1):35–41. DOI:10.1177/2516598418811460.
   Google Scholar
• Rajput AS, Singh A, Kapil S, et al. Investigations on the trochoidal toolpath for processing the biomaterial through magnetorheological fluid assisted finishing process. J Manuf Process. 2022 Apr 1;76:812–827.
   Web of Science ®Google Scholar
• Ohmori H, Katahira K, Akinou Y, et al. Investigation on grinding characteristics and surface-modifying effects of biocompatible Co-Cr alloy. CIRP Ann – Manuf Technol. 2006;55(1):597–600.
   Web of Science ®Google Scholar
• DesJardins JD, Burnikel B, LaBerge M. UHMWPE wear against roughened oxidized zirconium and CoCr femoral knee components during force-controlled simulation. Wear. 2008;264(3):245–256.
   Web of Science ®Google Scholar
• Kennedy FE, Van Citters DW, Wongseedakaew K, et al. Lubrication and wear of artificial knee joint materials in a rolling∕sliding tribotester. J Tribol. 2007 Apr;129(2):326–335.
   Web of Science ®Google Scholar
• Wang A, Sun DC, Stark C, et al. Wear mechanisms of UHMWPE in total joint replacements. Wear. 1995;181:241–249.
   Web of Science ®Google Scholar
• Xue Y, Wu W, Jacobs O, et al. Tribological behaviour of UHMWPE/HDPE blends reinforced with multi-wall carbon nanotubes. Polym Test. 2006 Apr 1;25(2):221–229.
   Web of Science ®Google Scholar
• Jagtap K, Pawade R, Giradkar K. Investigations on surface integrity and electrochemical behavior of machined Co-Cr-Mo Bio-implant alloy. ADMT J. 2016;9(4):51–58.
   Google Scholar
• Contu F, Elsener H, Bhni B. Characterization of implant materials in fetal bovine serum and sodium sulfate by electrochemical impedance spectroscopy. I. mechanically polished samples. J Biomed Mater Res. 2002;62(3):412–421.
   PubMed Web of Science ®Google Scholar
• Dobrzański LA, Brytan Z, Actis Grande M, et al. Corrosion behavior of vacuum sintered duplex stainless steels. J Mater Process Technol. 2007 Aug 1;191(1–3):161–164.
   Web of Science ®Google Scholar
• Elsener B, Addari D, Coray S, et al. Stainless steel reinforcing bars - reason for their high pitting corrosion resistance. Mater Corros. 2011 Feb;62(2):111–119.
   Web of Science ®Google Scholar