Corrosion behaviour of facile coated ZnO on Mg–Zn–Zr alloy in Ringer’s physiological solution

References

• Dou J, Chen Y, Yu H, et al. Research status of magnesium alloys by micro-arc oxidation: a review. Surf Eng. 2017;33(10):731–738. DOI: 10.1080/02670844.2017.1278642
   Web of Science ®Google Scholar
• Akram M, Arshad N, Braem A. Nanoparticle-modified coatings by electrophoretic deposition for corrosion protection of magnesium. Surf Eng. 2022;38(4):430–439. DOI: 10.1080/02670844.2022.2095151.
   Web of Science ®Google Scholar
• Yang Y, Xiong X, Chen J, et al. Research advances in magnesium and magnesium alloys worldwide in 2020. J Magnes Alloy. 2021;9(3):705–747. doi:10.1016/j.jma.2021.04.001.
   Web of Science ®Google Scholar
• Kania A, Pilarczyk W, Babilas R, et al. Selected properties of ZnO coating on Mg-based alloy for biomedical application. Acta Phys Pol A. 2018;133(2):222–224. doi:10.12693/APhysPolA.133.222.
   Web of Science ®Google Scholar
• Bakhsheshi-Rad HR, Hamzah E, Ismail AF, et al. Synthesis of a novel nanostructured zinc oxide/baghdadite coating on Mg alloy for biomedical application: in-vitro degradation behavior and antibacterial activities. Ceram Int. 2017;43(17):14842–14850. doi:10.1016/j.ceramint.2017.07.233.
   Web of Science ®Google Scholar
• Wang J, Jin C, Mei D, et al. Synthesis and degradation behaviour of Zn-modified coating on Mg alloy. Surf Eng. 2021;37(8):963–971. DOI: 10.1080/02670844.2020.1840827.
   Web of Science ®Google Scholar
• Liu D, Yang D, Li X, et al. Mechanical properties, corrosion resistance and biocompatibilities of degradable Mg-RE alloys: a review. J Mater Res Technol. 2019;8(1):1538–1549. DOI: 10.1016/J.JMRT.2018.08.003.
   Google Scholar
• Guan X, Zhu H, Shi J, et al. Influence of zinc-dipping on electroless nickel coating on magnesium alloy. Surf Eng. 2019;35(10):906–912. DOI: 10.1080/02670844.2018.1548101
   Web of Science ®Google Scholar
• Liu Y, Lu B, Cai Z. Recent progress on Mg- and Zn-based alloys for biodegradable vascular stent applications. J Nanomater. 2019;16. doi:10.1155/2019/1310792
   Google Scholar
• Song Y, Xu Z, Dong K, et al. Investigation of microcracks on conversion film of AZ80 Mg alloy. Surf Eng. 2019;35(6):527–535. DOI: 10.1080/02670844.2018.1507292.
   Web of Science ®Google Scholar
• Miao H, Zhang D, Chen C, et al. Research on biodegradable Mg–Zn–Gd alloys for potential orthopedic implants: in vitro and in vivo evaluations. ACS Biomater Sci Eng. 2019;5(3):1623–1634. doi:10.1021/acsbiomaterials.8b01563.
   PubMed Web of Science ®Google Scholar
• Zhu D, Cockerill I, Su Y, et al. Biodegradation, and in vitro and in vivo biocompatibility of Zn biomaterials. ACS Appl Mater Interfaces. 2019;11(7):6809–6819. doi:10.1021/acsami.8b20634.
   PubMed Web of Science ®Google Scholar
• Bisaria H, Patra BB, Mohanty S. Surface modification during hydroxyapatite powder mixed electric discharge machining of metallic biomaterials: a review. Surf Eng. 2022. DOI: 10.1080/02670844.2022.2155406
   Web of Science ®Google Scholar
• Seyfi M, Fattah-alhosseini A, Pajohi-Alamoti M, et al. Effect of ZnO nanoparticles addition to PEO coatings on AZ31B Mg alloy: antibacterial effect and corrosion behavior of coatings in Ringer’s physiological solution. J Asian Ceram Soc. 2021;9(3):11141127, DOI: 10.1080/21870764.2021.1940728.
   Web of Science ®Google Scholar
• Ren L, Gao S, Chen Z, et al. Facile preparation of wear-resistant and anti-corrosion films on magnesium alloy. Surf Eng. 2022;38(1):22–29. DOI: 10.1080/02670844.2021.2025312
   Web of Science ®Google Scholar
• Saadati A, Hesarikia H, Nourani MR, et al. Electrophoretic deposition of hydroxyapatite coating on biodegradable Mg–4Zn–4Sn–0.6Ca–0.5Mn alloy. Surf Eng. 2020;36(9):908–918. DOI: 10.1080/02670844.2019.1661145.
   Web of Science ®Google Scholar
• Zhao BH, Zhang W, Wang DN, et al. Effect of Zn content on cytoactivity and bacteriostasis of micro-arc oxidation coatings on pure titanium. Surf Coat Technol. 2013;228:S428–S432. doi:10.1016/j.surfcoat.2012.05.037.
   Web of Science ®Google Scholar
• Istrate B, Munteanu C, Antoniac I-V, et al. Current research studies of Mg–Ca–Zn biodegradable alloys used as orthopedic implants—review. Crystals (Basel). 2022;12:1468), doi:10.3390/cryst12101468.
   Web of Science ®Google Scholar
• Jana A, Das M, Balla VK. In vitro and in vivo degradation assessment and preventive measures of biodegradable Mg alloys for biomedical applications. J Biomed Mater Res A. 2022;110(2):462–487. doi:10.1002/jbm.a.37297.
   PubMedGoogle Scholar
• Zengin H, Turen Y, Turan ME, et al. Tensile and wear properties of as-cast and as-extruded ZK60 magnesium alloys containing minor Nd additions. Mater Res Express. 2019;6(8). DOI: 10.1088/2053-1591/aaf99a
   Web of Science ®Google Scholar
• Abedi H, Emamy M, Rassizadehghani J, et al. Synergistic effects of cerium-based rare earth addition and hot deformation on the microstructure and mechanical properties of Mg-0.5Zn-0.5Zr magnesium alloy. Met Mater Int. 2022;28:1105–1113. doi:10.1007/s12540-021-01065-9.
   Web of Science ®Google Scholar
• Shahzad M, Eliezer D, Gan WM, et al. Influence of extrusion temperature on microstructure, texture and fatigue performance of AZ80 and ZK60 magnesium alloys. Mater Sci Forum. 2007;561:187–119. DOI: 10.4028/www.scientific.net/MSF.561-565.187
   Google Scholar
• Grimm M, Conze S, Berger LM, et al. Microstructure and properties of atmospheric plasma sprayed (Al,Cr)2O3–TiO2 coatings from blends. J Therm Spray Tech. 2022;31:256–268. doi:10.1007/s11666-021-01289-6.
   Web of Science ®Google Scholar
• Krobthong S, Wongrerkdee S, Pimpang P, et al. Zno nanoparticles coprecipitation with aluminum and copper ions for efficient photocatalytic degradation of commercial glyphosate. Integr Ferroelectr. 2022;222(1):69–83. DOI: 10.1080/10584587.2021.1961517
   Web of Science ®Google Scholar
• Sivaganesh D, Saravanakumar S, Sivakumar V, et al. Structural, optical and charge density analysis of Al doped ZnO materials. J Mater Sci: Mater Electron. 2019;30:2966–2974. doi:10.1007/s10854-018-00574-5.
   Web of Science ®Google Scholar
• Din MI, Ali Z, Hussain Z, et al. Fabrication of ZnO/Mg nanoparticles for catalytic pyrolysis of phoenix dactylifera seeds biomass. Digest J Nanomater Biostruct. 2021;16:1157–1162.
   Web of Science ®Google Scholar
• Moghazy MA. Effect of stirring time on ZnO nanoparticles properties and morphology. IOP Conf Ser: Mater Sci Eng. 2021;1046(012012). DOI: 10.1088/1757-899X/1046/1/012012
   Google Scholar
• Dien ND. Preparation of various morphologies of ZnO nanostructure through wet chemical methods. Adv Mater Sci. 2019;4:1–5. DOI: 10.15761/AMS.1000147.
   Google Scholar
• Herrera-Rivera R, Olvera MdlL, Maldonado A. Synthesis of ZnO nanopowders by the homogeneous precipitation method: use of taguchi’s method for analyzing the effect of different variables. J Nanomater. 2017: 1–9. doi:10.1155/2017/4595384.
   Web of Science ®Google Scholar
• Fang ZZ, Wang H, Kumar V. Coarsening, densification, and grain growth during sintering of nano-sized powders—a perspective. Int J Refract Hard Met. 2017;62(Part B):110–117. doi:10.1016/j.ijrmhm.2016.09.004.
   Google Scholar
• Zhou H, Chen R, Liu Q, et al. Fabrication of ZnO/epoxy resin superhydrophobic coating on AZ31 magnesium alloy. J Chem Eng. 2019;368:261–272. doi:10.1016/j.cej.2019.02.032.
   Google Scholar
• Roshan NR, Hassannejad H, Nouri A. Corrosion and mechanical behaviour of biodegradable PLA-cellulose nanocomposite coating on AZ31 magnesium alloy. Surf Eng. 2021;37(2):236–245. DOI: 10.1080/02670844.2020.1776093.
   Web of Science ®Google Scholar
• Wu W, Liu J, Zhang Y, et al. Electrochemical characteristics of iridium coating by double glow plasma discharge process on titanium alloy substrates. Surf Eng. 2019;35(11):954–961. DOI: 10.1080/02670844.2019.1579400.
   Web of Science ®Google Scholar
• Gambaro S, Nascimento ML, Shekargoftar M, et al. Characterization of a magnesium fluoride conversion coating on Mg-2Y-1Mn-1Zn screws for biomedical applications. Materials (Basel). 2022;15:8245), doi:10.3390/ma15228245.
   PubMed Web of Science ®Google Scholar
• Tayyaba Q, Shahzad M, Butt AQ, et al. The influence of electrophoretic deposition of HA on Mg-Zn-Zr alloy on its in-vitro degradation behaviour in the ringer's solution. Surf Coat Technol. 2019;375:197–204. doi:10.1016/j.surfcoat.2019.07.014.
   Web of Science ®Google Scholar
• Zhu J, Jia C. Preparation of corrosion-resistant hydrophobic composite films on magnesium alloy. Surf Eng. 2022;38(7–9):713–724. DOI: 10.1080/02670844.2022.2161762.
   Web of Science ®Google Scholar
• Veleva L, Fernández-Olaya MG, Feliu S Jr. Initial stages of AZ31B magnesium alloy degradation in ringer’s solution: interpretation of EIS, mass loss, hydrogen evolution data and scanning electron microscopy observations. Metals (Basel). 2018;8(11):933, doi:10.3390/met8110933.
   Web of Science ®Google Scholar