Turning of Al 7075-T6 aerospace alloy under different sustainable metalworking fluid strategies by coated carbide tools

References

• Inasaki I. Towards symbiotic machining processes. Int J Prec Eng Manuf. 2012;7:1053–1057. doi:10.1007/s12541-012-0137-9.
   Web of Science ®Google Scholar
• Byrne G, Scholta E. Environmentally clean machining processes—a strategic approach. CIRP Ann. 1993;1:471–474. doi:10.1016/S0007-8506(07)62488-3.
   Google Scholar
• Jayal AD, Badurdeen F, Dillon OW, et al. Sustainable manufacturing: modeling and optimization challenges at the product, process and system levels. CIRP J Manuf Sci Technol. 2010;3:144–152. doi:10.1016/j.cirpj.2010.03.006.
   Google Scholar
• Singh J, Gill SS, Dogra M, et al. A review on cutting fluids used in machining processes. Eng Res Express. 2021;3:012002.
   Google Scholar
• Schultheiss F, Zhou J, Gröntoft E, et al. Sustainable machining through increasing the cutting tool utilization. J Cleaner Prod. 2013;59:298–307. doi:10.1016/j.jclepro.2013.06.058.
   Web of Science ®Google Scholar
• Khatri A, Jahan MP, Ma J. Assessment of tool wear and microstructural alteration of the cutting tools in conventional and sustainable slot milling of Ti-6Al-4 V alloy. Int J Adv Manuf Technol. 2019;105:2799–2814. doi:10.1007/s00170-019-04520-5.
   Web of Science ®Google Scholar
• Huang P, Li H, Zhu W, et al. Effects of eco-friendly cooling strategy on machining performance in micro-scale diamond turning of Ti e 6Al e 4V. J Clean Prod. 2020;243:118526. doi:10.1016/j.jclepro.2019.118526.
   Web of Science ®Google Scholar
• Wickramasinghe KC, Sasahara H, Abd Rahim E, et al. Green metalworking fluids for sustainable machining applications: a review. J Cleaner Prod. 2020;257:120552.
   Web of Science ®Google Scholar
• Park D. The occupational exposure limit for fluid aerosol generated in metalworking operations: limitations and recommendations. Saf Health Work. 2012;3:110–116.
   PubMedGoogle Scholar
• Sakib S, Ibne Z, Nurul AKM, et al. Tuning nano fluids for improved lubrication performance in turning biomedical grade titanium alloy. J Clean Prod. 2019;206:180–196. doi:10.1016/j.jclepro.2018.09.150.
   Web of Science ®Google Scholar
• Li C, Tang Y, Cui L, et al. A quantitative approach to analyze carbon emissions of CNC-based machining systems. J Intell Manuf. 2015;26:911–922.
   Web of Science ®Google Scholar
• Gupta MK, Niesłony P, Sarikaya M, et al. Studies on geometrical features of tool wear and other important machining characteristics in sustainable turning of aluminium alloys. Int J Precis Eng Manuf-Green Technol. 2023;10:1–15.
   Web of Science ®Google Scholar
• Kumar R, Bilga PS, Singh S. An investigation of energy efficiency in finish turning of EN 353 alloy steel. Proc CIRP. 2021;98:654–659.
   Google Scholar
• Airao J, Nirala CK, Bertolini R, et al. Sustainable cooling strategies to reduce tool wear, power consumption and surface roughness during ultrasonic assisted turning of Ti-6Al-4 V. Tribol Int. 2022;169:107494.
   Web of Science ®Google Scholar
• Ming W, Shen F, Zhang G, et al. Green machining: a framework for optimization of cutting parameters to minimize energy consumption and exhaust emissions during electrical discharge machining of Al 6061 and SKD 11. J Clean Prod. 2021;285:124889.
   Web of Science ®Google Scholar
• Xing Z, Dai H, Zhang J, et al. Evaluation and improvement of greenness for milling AL6061 alloy through life cycle assessment and grey relational analysis. Materials. 2022;22:8231.
   Web of Science ®Google Scholar
• Environmental Protection Agency. 40 CFR parts 413, 433, 438, 463, 464, 467, and 471: effluent limitations guidelines, pretreatment standards, and new source performance standards for the metal products and machinery point source category; proposed rule. Fed Regist. 2001;2:424–558.
   Google Scholar
• Khajehzadeh M, Razfar MR. FEM and experimental investigation of cutting force during UAT using multicoated inserts. Mater Manuf Process. 2015;7:858–867.
   Web of Science ®Google Scholar
• Bhowmick S, Shirzadian S, Alpas AT. High-temperature tribological behavior of Ti containing diamond-like carbon coatings with emphasis on running-in coefficient of friction. Surf Coat Technol. 2022;431:127995.
   Web of Science ®Google Scholar
• Hariharan MK, Rajkamal MD, Ravikumar K, et al. Investigation on effect of TiN, TiAlN & DLC-triple layer coated carbide tool in machining of Al-Si 4032 alloy. Materials Today Proc. 2022;59:39–46.
   Google Scholar
• Balaji AK, Jawahir IS. A machining performance study in dry contour turning of aluminum alloys with flat-faced and grooved diamond tools. Mach Sci Technol. 2001;5:269–289.
   Web of Science ®Google Scholar
• Bektaş BS, Samtaş G. Optimisation of cutting parameters in face milling of cryogenic treated 6061 aluminium alloy and effects on surface roughness, wear, and cutting temperatures. Surf Topogr Metrol Prop. 2022;2:025013.
   Web of Science ®Google Scholar
• Thakur A, Gangopadhyay S, Maity KP. Effect of cutting speed and CVD multilayer coating on machinability of Inconel 825. Surf Eng. 2014;7:516–523.
   Web of Science ®Google Scholar
• Ic YT, Saraloğlu Güler E, Cabbaroğlu C, et al. Optimisation of cutting parameters for minimizing carbon emission and maximising cutting quality in turning process. Int J Prod Res. 2018;11:4035–4055.
   Web of Science ®Google Scholar
• Katahira K, Nakamoto K, Fonda P, et al. A novel technique for reconditioning polycrystalline diamond tool surfaces applied for silicon micromachining. CIRP Ann. 2011;60:591–594.
   Web of Science ®Google Scholar
• Lipiäinen K, Ahola A, Kaijalainen A, et al. Fatigue performance and the effect of manufacturing quality on the uncoated and hot-dip galvanized ultra-high-strength steel laser cut edges. Int J Fatigue. 2022;164:107127.
   Google Scholar
• Cagan SC, Venkatesh B, Buldum BB. A study on the development of aluminum alloys using the mechanical surface improvement method using the Taguchi method. In: Vijayaraghavan L, Hemachandra Reddy K, Jameel Basha SM, editors. Emerging trends in mechanical engineering. Singapore: Springer; 2020. p. 315–324.
   Google Scholar
• Camposeco-Negrete C. Optimization of cutting parameters using response surface method for minimizing energy consumption and maximizing cutting quality in turning of AISI 6061 T6 aluminum. J Cleaner Prod. 2015;91:109–117..
   Web of Science ®Google Scholar
• Gupta MK, Mia M, Singh G, et al. Hybrid cooling-lubrication strategies to improve surface topography and tool wear in sustainable turning of Al 7075-T6 alloy. Int J Adv Manuf Technol. 2019;1:55–69.
   Web of Science ®Google Scholar
• Sartori S, Ghiotti A, Bruschi S. Temperature effects on the Ti6Al4V machinability using cooled gaseous nitrogen in semi-finishing turning. J Manuf Process. 2017;30:187–194.
   Web of Science ®Google Scholar
• Kouam J, Songmene V, Balazinski M, et al. Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy. Int J Adv Manuf Technol. 2015;5:1325–1334.
   Web of Science ®Google Scholar
• Rotella G, Lu T, Settineri L, et al. Dry and cryogenic machining: comparison from the sustainability perspective. In: Fak. V Verkehrs- und Maschinensysteme, Inst. Werkzeugmaschinen/Fabrikbetrieb, editors. Sustainable manufacturing. Berlin: Springer; 2012. p. 95–100.
   Google Scholar
• Jawahir IS, Pu Z, Yang S, et al. Cryogenic processing of materials for enhanced product life, performance and sustainability. Proceedings of 15th international conference on advances in materials and processing technologies, Wollongong, Australia; 2012.
   Google Scholar
• Rotella G. Effect of surface integrity induced by machining on high cycle fatigue life of 7075-T6 aluminum alloy. J Manuf Process. 2019;41:83–91.
   Web of Science ®Google Scholar
• Wickramasinghe KC, Sasahara H, Abd Rahim E, et al. Recent advances on high performance machining of aerospace materials and composites using vegetable oil-based metal working fluids. J Cleaner Prod. 2021;310:127459.
   Web of Science ®Google Scholar
• Paul S, Pal PK. Study of surface quality during high speed machining using eco-friendly cutting fluid. Mach Technol Mater. 2011;11:24–28.
   Google Scholar
• Yeganefar A, Niknam SA, Songmene V. Machinability study of aircraft series aluminium alloys 7075-T6 and 7050-T7451. Trans Can Soc Mech Eng. 2019;3:427–439.
   Google Scholar
• Itoigawa F, Childs TH, Nakamura T, et al. Effects and mechanisms in minimal quantity lubrication machining of an aluminum alloy. Wear. 2006;3:339–344.
   Web of Science ®Google Scholar
• Imbrogno S, Rinaldi S, Suarez AG, et al. High speed machinability of the aerospace alloy AA7075 T6 under different cooling conditions. AIP Conf Proc. 2018;1960:070013.
   Google Scholar
• Blanco D, Rubio EM, Lorente-Pedreille RM, et al. Sustainable processes in aluminium, magnesium, and titanium alloys applied to the transport sector: a review. Metals. 2022;1:9.
   Google Scholar
• Batista Ponce M, Del Sol Illana I, Fernandez-Vidal SR, et al. Experimental parametric model for adhesion wear measurements in the dry turning of an AA2024 alloy. Materials. 2018;9:1598.
   Web of Science ®Google Scholar
• Akhtar MN, Sathish T, Mohanavel V, et al. Optimization of process parameters in CNC turning of aluminum 7075 alloy using L27 array-based taguchi method. Materials. 2021;16:4470.
   Web of Science ®Google Scholar
• Bhushan RK. Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites. J Cleaner Prod. 2013;39:242–254..
   Web of Science ®Google Scholar
• Ramana MV, Rao GKM, Rao DH. Effect of process parameters on surface roughness in turning of titanium alloy under different conditions of lubrication. Conference in proceedings of recent Advances in robotics, aeronautical and mechanical Engineering held; Athens, Greece; 2013. p. 83–91.
   Google Scholar
• Gupta MK, Song Q, Liu Z, et al. Machining characteristics based life cycle assessment in eco-benign turning of pure titanium alloy. J Cleaner Prod. 2020;251:119598.
   Web of Science ®Google Scholar
• Martin-Bejar S, Trujillo Vilches FJ, Bermudo Gamboa C, et al. Cutting speed and feed influence on surface microhardness of dry-turned UNS A97075-T6 alloy. Appl Sci. 2020;10:1049.
   Google Scholar
• Cagan SC, Venkatesh B, Buldum BB. Investigation of surface roughness and chip morphology of aluminum alloy in dry and minimum quantity lubrication machining. Mater Today Proc. 2020;27:1122–1126.
   Google Scholar
• Sharma VS, Dogra M, Suri NM. Cooling techniques for improved productivity in turning. Int J Mach Tools Manuf. 2009;49:435–453.
   Web of Science ®Google Scholar
• Maruda RW, Krolczyk GM, Feldshtein E, et al. A study on droplets sizes, their distribution and heat exchange for minimum quantity cooling lubrication (MQCL). Int J Mach Tools Manuf. 2016;100:81–92.
   Web of Science ®Google Scholar
• Singh J, Gill SS, Dogra M, et al. State of the art review on the sustainable dry machining of advanced materials for multifaceted engineering applications: progressive advancements and directions for future prospects. Mater Res Express. 2022;9:064003.
   Web of Science ®Google Scholar
• Hafiz MS, Kasim MS, Mohamad WN, et al. The effects of dry and chilled air on tool wear behavior during face milling of inconel 718. J Tribol. 2019;21:47–62.
   Google Scholar
• Mia M, Dhar NR. Influence of single and dual cryogenic jets on machinability characteristics in turning of Ti-6Al-4 V. Proc Inst Mech Eng Part B. 2019;3:711–726.
   Web of Science ®Google Scholar
• Jerold BD, Kumar MP. The influence of cryogenic coolants in machining of Ti–6Al–4 V. J Manuf Sci Eng. 2013;135(3):031005-1–031008.
   Web of Science ®Google Scholar
• Gómez-Parra A, Álvarez-Alcón M, Salguero J, et al. Analysis of the evolution of the built-up edge and built-up layer formation mechanisms in the dry turning of aeronautical aluminium alloys. Wear. 2013;302:1209–1218.
   Web of Science ®Google Scholar
• Sreejith PS. Machining of 6061 aluminium alloy with MQL, dry and flooded lubricant conditions. Mater Lett. 2008;62:276–278.
   Web of Science ®Google Scholar
• Sun S, Brandt M, Palanisamy S, et al. Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti–6Al–4 V alloy. J Mater Process Technol. 2015;221:243–254.
   Web of Science ®Google Scholar
• Mia M, Singh G, Gupta MK, et al. Influence of Ranque-Hilsch vortex tube and nitrogen gas assisted MQL in precision turning of Al 6061-T6. Prec Eng. 2018;53:289–299.
   Web of Science ®Google Scholar
• Khan AM, Gupta MK, Hegab H, et al. Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel. J Cleaner Prod. 2020;257:120502.
   Web of Science ®Google Scholar
• Singh J, Gill SS, Dogra M, et al. Effect of Ranque-Hilsch vortex tube cooling to enhance the surface-topography and tool-wear in sustainable turning of Al-5.6 Zn-2.5 Mg-1.6 Cu-0.23 Cr-T6 aerospace alloy. Materials. 2022;16:5681.
   Web of Science ®Google Scholar