References
- Zhang Y, Tao W, Chen Y, et al. Experiment and numerical simulation for the compressive buckling behavior of double-sided laser-welded Al-Li alloy aircraft fuselage panel. Materials (Basel). 2020;13(16):3599. doi:10.3390/ma13163599.
- Hwang Y-J, Choi Y-S, Hwang Y-H, et al. Biocompatibility and biological corrosion resistance of Ti–39Nb–6Zr+0.45Al implant alloy. J Funct Biomater. 2021;12(1):2. doi:10.3390/jfb12010002.
- Niu J, Liu Z, Bing W, et al. Effect of machining-induced surface integrity on the corrosion behavior of Al-Li alloy 2A97 in sodium chloride solution. Mater Corros. 2019;70(2):259–267. doi:10.1002/maco.201810380.
- JVdS A, Milagre MX, Ferreira RO, et al. Exfoliation and intergranular corrosion resistance of the 2198 Al–Cu–Li alloy with different thermomechanical treatments. Mater Corros. 2020;71(12):1957–1970. doi:10.1002/maco.202011839.
- Samaniego-Gámez PO, Almeraya-Calderon F, Maldonado-Bandala E, et al. Corrosion behavior of AA2055 aluminum-lithium alloys anodized in the presence of sulfuric acid solution. Coatings. 2021;11(11):1278. doi:10.3390/coatings11111278.
- Tao X, Gao Y, Kang J, et al. Softening effects induced by shot peening for an aluminum-lithium alloy. Metall Mater Trans A. 2020;51(1):410–418. doi:10.1007/s11661-019-05506-4.
- Duan YF, Liu JW, Wang P. Effect of In2(SO4)3 on characteristics of Al–Li alloy MAO coating. Surf Eng. 2022;38(4):440–447. doi:10.1080/02670844.2022.2087955.
- Shen Y, Fang K, Xiang Y, et al. Improvement in osteogenesis, vascularization, and corrosion resistance of titanium with silicon-nitride doped micro-arc oxidation coatings. Front Bioeng Bio Tech. 2022;10:1023032. doi:10.3389/fbioe.2022.1023032.
- Yang B, Wang P, Hu J, et al. Improving structure and corrosion resistance of micro-arc oxidation coatings formed on aluminum alloy with the addition of La2O3. Int J Mater Res. 2022;113(8):693–700. doi:10.1515/ijmr-2021-8272.
- Zhao ZL, Chen L, Ren HG. Effect of pulse frequency on growth kinetics of ceramic coatings formed on 2090 Al-Li alloy. Surf Eng. 2012;28(6):442–447. doi:10.1179/1743294411Y.0000000038.
- Dehnavi V. Surface modification of aluminum alloys by plasma electrolytic oxidation, PhD Dissertation: London: University of Western Ontario; 2014. Available from: https://ir.lib.uwo.ca/etd/2311.
- Lv XC, Cao L, Wan Y, et al. Effect of different electrolytes in micro-arc oxidation on corrosion and tribological performance of 7075 aluminum alloy. Mater Res Express. 2019;6(8):086421. doi:10.1088/2053-1591/ab1da5.
- Wang P, Pu J, Xiao YT, et al. Effect of graphite additives in electrolytes on characteristics of micro-arc oxidation coatings on 7E04 aluminum alloy. Surf Rev Lett. 2019;26(4):1850178. doi:10.1142/S0218625X18501780.
- Wang P, Pu J, Liu X, et al. Characterization of miro-arc oxidation coatings on cast aluminum alloy doped with different Y2O3 particle concentration. Mater Res Express. 2019;6(9):096544. doi:10.1088/2053-1591/ab2ee6.
- Tang Y, Xiao D, Huang L, et al. Effect of minor Sc addition on the microstructure evolution of Al–Cu–Li–Mg alloy during homogenization with different cooling modes. Met Mater Int. 2022;28(10):2422–2433. doi:10.1007/s12540-021-01146-9.
- Xia P, Wang S, Huang H, et al. Effect of Sc and Zr additions on recrystallization behavior and intergranular corrosion resistance of Al-Zn-Mg-Cu alloys. Materials (Basel). 2021;14(19):5516. doi:10.3390/ma14195516.
- Kerkove MA, Wood TD, Sanders PG, et al. The diffusion coefficient of scandium in dilute aluminum-scandium alloys. Metall Mater Trans A. 2014;45(9):3800–3805. doi:10.1007/s11661-014-2275-4.
- Wang P, Gong Z, Li H, et al. Effect of CoSO4 on the characteristics of micro-arc oxidation coatings. Surf Eng. 2020;36(2):216–224. doi:10.1080/02670844.2019.1650468.
- Durdu S, Usta M. Characterization and mechanical properties of coatings on magnesium by micro arc oxidation. Appl Surf Sci. 2012;261:774–782. doi:10.1016/j.apsusc.2012.08.099.
- Cacciamani G, Riani P, Borzone G, et al. Thermodynamic measurements and assessment of the Al–Sc system. Intermetallics. 1999;7(1):101–108. doi:10.1016/S0966-9795(98)00022-3.
- Fierro JLG, Mendióroz S, Sanz J. Physicochemical characterization of scandium oxide gels. J Colloid Interface Sci. 1983;93(2):487–497. doi:10.1016/0021-9797(83)90432-0.
- Liu ZY, Ma GF. Ceramic surface treatment of aluminum alloy. Key Eng Mater. 2020;837:46–50. doi:10.4028/www.scientific.net/KEM.837.46.
- Hu J, Wang P, Liao DD, et al. Effects of cobalt(II)sulfate addition on structure and corrosion resistance of alloy micro-arc oxidation coating on the ZL108 aluminum. Int J Electrochem Sci. 2020;15(6):4978–4987. doi:10.20964/2020.06.78.
- Zong Y, Hua TS, Cai SW, et al. Electrochemical corrosion behavior of micro-arc oxidation coating on an aluminum alloy. Mater Performance. 2020;59(6):38–41.
- Hua TS, Song RG, Zong Y, et al. Effect of solution pH on stress corrosion and electrochemical behaviour of aluminum alloy with micro-arc oxidation coating. Mater Res Express. 2019;6(9):096441. doi:10.1088/2053-1591/ab30fc.
- Liu JW, Wang P, Tang YT, et al. Effect of Bi2S3 on characteristics of micro-arc oxidation coating formed on TC4 alloy. Int J Electrochem Sci. 2021;16(1):150919.