Wear and corrosion behaviour of the cryogenically treated tungsten carbide coatings

References

• Basak AK, Celis JP, Ponthiaux P, et al. Effect of nanostructuring and Al alloying on corrosion behaviour of thermal sprayed WC–Co coatings. Mater Sci Eng: A. 2012;558:377–385.
   Web of Science ®Google Scholar
• Jalali Azizpour M, Tolouei-Rad M. The effect of spraying temperature on the corrosion and wear behavior of HVOF thermal sprayed WC–Co coatings. Ceram Int. 2019;45(11):13934–13941.
   Web of Science ®Google Scholar
• Govande AR, Chandak A, Sunil BR, et al. Carbide-based thermal spray coatings: A review on performance characteristics and post-treatment. Int J Refractory Metals Hard Mater. 2022;103:105772.
   Web of Science ®Google Scholar
• Govande AR, Katiyar JK, Sunil BR, et al. Effect of heat treatment environment on the structural characteristics and microhardness of high velocity oxy-fuel sprayed tungsten carbide-cobalt coatings. Materialwiss Werkstofftech. 2021;52(12):1346–1354.
   Web of Science ®Google Scholar
• Govande AR, Sunil BR, Dumpala R. Reciprocating sliding wear behavior of the heat-treated WC–12Co coatings. Proc Inst Mech Eng, Part J J Eng Tribol. 2022;237(4):798–807.
   Web of Science ®Google Scholar
• Hazra S, Sabiruddin K, Bandyopadhyay PP. Plasma and HVOF sprayed WC–Co coatings as hard chrome replacement solution. Surf Eng. 2012;28(1):37–43.
   Web of Science ®Google Scholar
• Suresh Babu P, Madhavi Y, Krishna LR, et al. Thermally-sprayed WC-based cermet coatings for corrosion resistance applications. JOM. 2018;70(11):2636–2649.
   Web of Science ®Google Scholar
• Bhosale DG, Rathod WS. Tribo-behaviour of APS and HVOF sprayed WC–Cr3C2–Ni coatings for gears. Surf Eng. 2021;37(1):80–90.
   Web of Science ®Google Scholar
• López AJ, Rams J. Protection of carbon steel against molten aluminum attack and high temperature corrosion using high velocity oxygen-fuel WC–Co coatings. Surf Coat Technol. 2015;262:123–133.
   Web of Science ®Google Scholar
• Bouaricha S, Ouchene A, Legoux J-G. Rietveld analysis for studying the decarburisation in HVOF WC–CO coatings. Surf Eng. 2018;34(10):747–754.
   Web of Science ®Google Scholar
• Ghadami F, Sohi MH, Ghadami S. Effect of bond coat and post-heat treatment on the adhesion of air plasma sprayed WC–Co coatings. Surf Coat Technol. 2015;261:289–294.
   Web of Science ®Google Scholar
• Picas JA, Punset M, Menargues S, et al. Microstructural and tribological studies of as-sprayed and heat-treated HVOF Cr3C2–CoNiCrAlY coatings with a CoNiCrAlY bond coat. Surf Coat Technol. 2015;268:317–324.
   Web of Science ®Google Scholar
• Mahmud TB, Farrokhzad MA, Khan TI. Effect of heat treatment on wear performance of nanostructured WC-Ni/Cr HVOF sprayed coatings. Tribology Online. 2017;12(1):18–28.
   Google Scholar
• Hou GL, An YL, Zhao XQ, et al. Effect of heat treatment on wear behaviour of WC–(W,Cr)2C–Ni coating. Surf Eng. 2012;28(10):786–790.
   Web of Science ®Google Scholar
• Asl SK, Sohi MH, Hokamoto K, et al. Effect of heat treatment on wear behavior of HVOF thermally sprayed WC-Co coatings. Wear. 2006;260(11):1203–1208.
   Web of Science ®Google Scholar
• Gallego M, Chávez SC, de la Roche J, et al. Effect of heat treatment on the wet abrasion resistance of WC–10Co4Cr coatings deposited onto stainless steel by HVOF. Tribology Mater Surfaces Interfaces. 2022;16(2):168–176.
   Web of Science ®Google Scholar
• González MA, Rodríguez E, Mojardín E, et al. Study of the erosive wear behaviour of cryogenically and tempered WC–CoCr coating deposited by HVOF. Wear. 2017;376-377:595–607.
   Web of Science ®Google Scholar
• Wang G, Gu K, Huang Z, et al. Improving the wear resistance of as-sprayed WC coating by deep cryogenic treatment. Mater Lett. 2016;185:363–365.
   Web of Science ®Google Scholar
• Govande AR, Chandak A, Sunil BR, et al. Microhardness and frictional characteristics of cryogenically treated carbide coatings. Mater Today Proc. 2021;47:3112–3116.
   Google Scholar
• Babu A, Arora HS, Nair RB, et al. Wear behavior of microwave-annealed and cryogenically treated thermal spray coatings: a comparative evaluation. Mater Today Proc. 2020;33:5348–5353.
   Google Scholar
• Asl SK, Rabizadeh T, Noori NF. The effects of heat treatment on the corrosion behavior of HVOF-sprayed WC–17 wt% Co coatings. Protect Metals Phys Chem Surf. 2019;55(5):936–941.
   Web of Science ®Google Scholar
• Picas JA, Punset M, Baile MT, et al. Effect of oxygen/fuel ratio on the in-flight particle parameters and properties of HVOF WC–CoCr coatings. Surf Coat Technol. 2011;205:S364–S368.
   Web of Science ®Google Scholar
• Monticelli C, Frignani A, Zucchi F. Investigation on the corrosion process of carbon steel coated by HVOF WC/Co cermets in neutral solution. Corros Sci. 2004;46(5):1225–1237.
   Web of Science ®Google Scholar
• Arunnellaiappan T, Baskaran S, Arun S, et al. Corrosion behaviour of detonation gun sprayed cermet coatings on AA5083. Surf Eng. 2021;37(2):263–270.
   Web of Science ®Google Scholar
• Pishva P, Salehi M, Golozar MA. Effect of grinding on surface characteristics of HVOF-sprayed WC–10Co–4Cr coatings. Surf Eng. 2020;36(11):1180–1189.
   Web of Science ®Google Scholar
• Reddy KRRM, Ramanaiah N, Sarcar M. Effect of heat treatment on corrosion behavior of duplex coatings. J King Saud Univ-Eng Sci. 2017;29(1):84–90.
   Google Scholar
• Bricín D, Průcha V, Jansa Z, et al. Changes in structure and corrosion resistance of cryogenically treated WC–Co cemented carbides. IOP Conf Ser: Mater Sci Eng. 2021;1193(1):1–8.
   Google Scholar
• Celik ON, Sert A, Gasan H, et al. Effect of cryogenic treatment on the microstructure and the wear behavior of WC–Co end mills for machining of Ti6Al4V titanium alloy. Int J Adv Manuf Technol. 2018;95(5):2989–2999.
   Web of Science ®Google Scholar
• Yong J, Ding C. Effect of cryogenic treatment on WC–Co cemented carbides. Mater Sci Eng: A. 2011;528(3):1735–1739.
   Web of Science ®Google Scholar
• Kalsi NS, Sehgal R, Sharma VS. Effect of tempering after cryogenic treatment of tungsten carbide–cobalt bounded inserts. Bullet Mater Sci. 2014;37(2):327–335.
   Web of Science ®Google Scholar
• Bonny K, Baets PD, Perez Y, et al. Friction and wear characteristics of WC–Co cemented carbides in dry reciprocating sliding contact. Wear. 2010;268(11):1504–1517.
   Web of Science ®Google Scholar
• Cho JE, Hwang SY, Kim KY. Corrosion behavior of thermal sprayed WC cermet coatings having various metallic binders in strong acidic environment. Surf Coat Technol. 2006;200(8):2653–2662.
   Web of Science ®Google Scholar
• Wang Q, Zhang S, Cheng Y, et al. Wear and corrosion performance of WC–10Co4Cr coatings deposited by different HVOF and HVAF spraying processes. Surf Coat Technol. 2013;218:127–136.
   Web of Science ®Google Scholar
• Souza V, Neville A. Mechanisms and kinetics of WC–Co− Cr high velocity oxy-fuel thermal spray coating degradation in corrosive environments. J Therm Spray Technol. 2006;15(1):106–117.
   Web of Science ®Google Scholar
• Hong S, Wu Y, Zheng Y, et al. Effect of spray parameters on the corrosion behavior of HVOF sprayed WC–Co–Cr coatings. J Mater Eng Perform. 2014;23(4):1434–1439.
   Web of Science ®Google Scholar
• Lillard RS, Kanner GS, Butt DP. The nature of oxide films on tungsten in acidic and alkaline solutions. J Electrochem Soc. 1998;145(8):2718–2725.
   Web of Science ®Google Scholar
• Lekatou A, Sioulas D, Karantzalis AE, et al. A comparative study on the microstructure and surface property evaluation of coatings produced from nanostructured and conventional WC–Co powders HVOF-sprayed on Al7075. Surf Coat Technol. 2015;276:539–556.
   Web of Science ®Google Scholar
• Nan J, Yang Y, Lin Z. Raman spectroscopic study on the surface oxide layer of AB5-type metal hydride electrodes. Electrochim Acta. 2001;46(12):1767–1772.
   Web of Science ®Google Scholar
• Thummavichai K, Wang N, Xu F, et al. In situ investigations of the phase change behaviour of tungsten oxide nanostructures. R Soc Open Sci. 2018;5(4):1–10.
   Web of Science ®Google Scholar
• Clites M, Blickley A, Cullen DA, et al. Chemical preintercalation synthesis approach for the formation of new layered tungsten oxides. J Mater Sci. 2022;57(16):7814–7826.
   Web of Science ®Google Scholar
• Lekatou A, Regoutas E, Karantzalis AE. Corrosion behaviour of cermet-based coatings with a bond coat in 0.5M H2SO4. Corros Sci. 2008;50(12):3389–3400.
   Web of Science ®Google Scholar
• Mohrbacher H, Blanpain B, Celts J-P, et al. Raman spectroscopy on defective wear debris generated by contact vibrations. J Mater Sci Lett. 1995;14(4):279–281.
   Google Scholar