References
- Ajaja J, Jomaa W, Bocher P, et al. High cycle fatigue behavior of hard turned 300 M ultra-high strength steel. Int J Fatigue. 2020;131:105380. doi:10.1016/j.ijfatigue.2019.105380.
- Madyira DM, Kumbaa T, Kaymakcia A. Influence of manufacturing conditions on fatigue life of welded joints. Procedia Manuf. 2017;8:665–672. doi:10.1016/j.promfg.2017.02.085.
- Tremarin RC, Pravia ZMC. Previsões de Vida Fadiga Segundo Normas Técnicas: Uma Revisão Crítica. Soldagem Inspeção. 2017;22(3):281–299. doi:10.1590/0104-9224/si2203.06.
- Florea RS, Bammann DJ, Yeldell A, et al. Welding parameters influence on fatigue life and microstructure in resistance spot welding of 6061-T6 aluminum alloy. Mater Des. 2013;45:456–465. doi:10.1016/j.matdes.2012.08.053.
- Shen M, Chang H, Yang Y, et al. Evaluation method of fatigue life for weld joints with defects in the horizontal restraint components of main steam pipelines. Energy Rep. 2021;7:926–937. doi:10.1016/j.egyr.2021.09.180.
- Qi H-Y, Shi H, Li S-L, et al. Fatigue crack growth of titanium alloy joints by electron beam welding. Rare Met. 2014;33(5):516–521. doi:10.1007/s12598-013-0190-2.
- Carvalho SM, Baptista CARP, Lima MSF. Fatigue in laser welded titanium tubes intended for use in aircraft pneumatic systems. Int J Fatigue. 2016;90:47–56. doi:10.1016/j.ijfatigue.2016.04.018.
- Anazawa RM, Abdalla AJ, Hashimoto TM, et al. Estudo Das Propriedades Mecânicas Do Aço 300M Devido À Utilização De Retífica Após Tratamentos Térmicos. In 6th Brazilian Conference on Manufacturing Engineering; ABCM: Caxias do Sul, 2011; pp. 1–10.
- Singh G, Singh PK. Effect of process parameters on performance of grooved hot rolling of SAE 4340 steel bars. Mater Manuf Processes. 2023;38(2):206–219. doi:10.1080/10426914.2022.2075894.
- Jomaa W, Songmene V, Bocher P. An investigation of machining-induced residual stresses and microstructure of induction-hardened AISI 4340 steel. Mater Manuf Processes. 2016;31(7):838–844. doi:10.1080/10426914.2015.1070431.
- Mehrabi A, Sharifi H, Asadi Asadabad M, et al. Improvement of AISI 4340 steel properties by intermediate quenching – microstructure, mechanical properties, and fractography. Int J Mater Res. 2020;111(9):711–779. doi:10.3139/146.111939.
- Choudhary P, Garrison WM. The effect of inclusion type on the toughness of 4340 steel. Mater Manuf Processes. 2010;25(1–3):180–184. doi:10.1080/10426910903221138.
- Tavares SSM, Pardal JM, Martins TRdB, et al. Influence of austenitizing on the mechanical properties of maraging 300 and Sae 4340 steels - comparative study. Mater Res. 2017;20(suppl 2):39–46. doi:10.1590/1980-5373-mr-2016-0884.
- De Carvalho SM, De Lima MSF. Laser beam welding tempered 300M ultrahigh mechanical strength steel. J Braz Soc Mech Sci Eng. 2012;34(1). doi:10.1590/S1678-58782012000100003.
- McDaniels RL, White SA, Liaw K, et al. Effects of a laser surface processing induced heat-affected zone on the fatigue behavior of AISI 4340 steel. Mater Sci Eng A. 2008;485(1–2):500–507. doi:10.1016/j.msea.2007.08.039.
- Dang J, Zhang H, An Q, et al. Surface integrity and wear behavior of 300M steel subjected to ultrasonic surface rolling process. Surf Coat Technol. 2021;421:127380. doi:10.1016/j.surfcoat.2021.127380.
- Hernández-Rengifo E, Rodríguez SA, Coronado JJ. Improving fatigue strength of hydromachinery 13Cr-4Ni CA6NM steel with nitriding and thermal spraying surface treatments. Fatigue Fract Eng Mater Struct. 2021;44(4):1059–1072. doi:10.1111/ffe.13413.
- Ratajski J, Tacikowski J, Somers MAJ. Development of compound layer of iron (carbo)nitrides during nitriding of steel. Surf Eng. 2003;19(4):285–291. doi:10.1179/026708403322499218.
- Abdalla AJ, Santos D, Vasconcelos G, et al. Changing in fatigue life of 300 M bainitic steel after laser carburizing and plasma nitriding. MATEC Web Conf. 2018;165:21002. doi:10.1051/matecconf/201816521002.
- ASTM E466. Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials. ASTM International, 2021.
- Avishan B, Garcia-Mateo C, Yazdani S, et al. Retained austenite thermal stability in a nanostructured bainitic steel. Mater Charact. 2013;81:105–110. doi:10.1016/j.matchar.2013.04.015.