Hydrodynamic Study of Gas–Solid Internally Circulating Fluidized Bed Using Multiphase CFD Model

References

• Abu-Zaid, S., and G. Ahmadi. 1990. A simple kinetic model for rapid granular flows including frictional losses. ASCE Journal of Engineering Mechanics 116:379–389.
   Web of Science ®Google Scholar
• Ahmadi, G., and D. N. Ma. 1986. A kinetic model for granular flows of nearly elastic particles ingrain-inertia regime. International Journal of Bulk Solid Storage Soils 2:8–16.
   Google Scholar
• Ahmadi, G., and M. Shahinpoor. 1983. A kinetic model for rapid flow of granular materials. International Journal of Non-Linear Mechanics 19:177–186.
   Web of Science ®Google Scholar
• Ahuja, G. N., and A. W. Patwardhan. 2008. CFD and experimental studies of solids hold-up distribution and circulation patterns in gas–solid fluidized beds. Chemical Engineering Journal 143:147–160.
   Web of Science ®Google Scholar
• Arastoopour, H., P. Pakdel, and M. Adewumi. 1990. Hydrodynamic analysis of dilute gas–solids flow in a vertical pipe. Powder Technology 62:163–170.
   Web of Science ®Google Scholar
• Beetstra, R., M. A. van der Hoef, and J. A. M. Kuipers. 2007. Numerical study of segregation using a new drag force correlation for polydisperse systems derived from lattice-Boltzmann simulations. Chemical Engineering Science 62:246–255.
   Web of Science ®Google Scholar
• Benjapon, CH., D. Gidaspow, and P. Piumsomboona. 2011. Two- and three-dimensional CFD modeling of Geldart A particles in a thin bubbling fluidized bed: Comparison of turbulence and dispersion coefficient. Chemical Engineering Journal 171:301–313.
   Web of Science ®Google Scholar
• Benyahia, S., H. Arastoopour, T. Knowlton, and H. Massah. 2000. Simulation of particles and gas flow behavior in the riser section of a circulating fluidized bed using the kinetic theory approach for the particulate phase. Powder Technology 112:24–33.
   Web of Science ®Google Scholar
• Burugupalli, V. R. 1988. Process analysis of a twin fluidized bed biomass gasification system. Industrial and Engineering Chemistry Research 27:304–312.
   Web of Science ®Google Scholar
• Chalermsinsuwana, B., D. Gidaspow, and b. Pornpote Piumsomboona. 2011. Two- and three-dimensional CFD modeling of Geldart A particles in a thin bubbling fluidized bed : Comparison of turbulence and dispersion coefficient. Chemical Engineering Journal 171:301–313.
   Web of Science ®Google Scholar
• Chan, C. K., Y. C. Guo, and K. S. Lau. 2005. Numerical modeling of gas-particle flow using a comprehensive kinetic theory with turbulence modulation. Powder Technology 150:42–55.
   Web of Science ®Google Scholar
• Ding, J, and D. Gidaspow. 1990. A Bubbling Fluidization Model Using Kinetic Theory of Granular Flow. AIChE Journal 36:523–538.
   Web of Science ®Google Scholar
• Ergun, S. 1952. Fluid flow through packed columns. Chemical Engineering Progress 48:89–94.
   Web of Science ®Google Scholar
• Feng, Y., T. Smith, Peter J. Witt., Christian Doblin, Seng Lim, and M. Phil Schwarz. 2012. CFD modeling of gas–solid flow in an internally circulating fluidized bed. Powder Technology 219:78–85.
   Web of Science ®Google Scholar
• Feng, Y. Q., Witt, P. Doblin, C. Lim, and P. Schwarz. 2010. CFD modeling of gas-solids flow in an internally circulation fluidized bed. In The 10th China-Japan Symposium on Fluidization. Tokyo.
   Google Scholar
• Gera, D. M., Y. Gautam, T. Tsuji, Kawaguchi, and T. Tanaka. 1998. Computer simulation of bubbles in large-particle fluidized beds. Powder Technology 98:38–47.
   Web of Science ®Google Scholar
• Gibilaro, L. G., R. Di Felice, and S. P. Waldram. 1985. Generalized friction factor and drag coefficient correlations for fluid–particle interactions. Chemical Engineering Science 40:1817–1823.
   Web of Science ®Google Scholar
• Gidaspow, D. 1994. Multiphase flow and fluidization: Continuum and kinetic theory description, New York: Academic Press.
   Google Scholar
• Gidaspow, D., and R. Mostofi. 2003. Maximum carrying capacity and granular temperature of A, B, and C particles. AIChE Journal 49:831–843.
   Web of Science ®Google Scholar
• Gidaspow, D., J. Jonghwun, and R. K. Singh. 2004. Hydrodynamics of Fluidization using Kinetic Theory: An Emerging Paradigm 2002 Flour-Daniel Lecture. Powder Technology 148:123–141.
   Web of Science ®Google Scholar
• Helland, E., H. Bournot, R. Occelli, and L. Tadrist. 2007. Drag reduction and cluster formation in a circulating fluidised bed. Chemical Engineering Science 62:148–158.
   Web of Science ®Google Scholar
• Hosseini, S., G. Ahmadi, c. Rahimi, c. Mortaza, and Mohsen. 2010. CFD studies of solids hold-up distribution and circulation patterns in gas–solid fluidized beds. Powder Technology 200:202–215.
   Web of Science ®Google Scholar
• Hosseini, S. H., M. Zivdar, R. Rahimi, and A. Samimi. 2009. CFD simulation of gas–solid bubbling fluidized bed containing the FCC particles. Korean J. Chem. Eng. 26:1405–1413.
   Web of Science ®Google Scholar
• Huilin, L., H. Yurong, L. Wentie, D. Jianmin, D. Gidaspow, and J. Bouillard. 2004. Computer simulations of gas–solid flow in spouted beds using kinetic-frictional stress model of granular flow. Chemical Engineering Science 59:865–878.
   Web of Science ®Google Scholar
• Ishikura, T., and H. Nagashima. 2003. Hydrodynamics of a spouted bed with a porous draft tube containing a small amount of finer particles. Powder Technology 131:56–65.
   Web of Science ®Google Scholar
• Jeon, J. H., and S. D. Kim. 2010. Hydrodynamic characteristics of binary solids mixtures in a square internally circulating fluidized bed. Journal of Chemical Engineering of Japan 43(2):126–131.
   Web of Science ®Google Scholar
• Johnson, P. C., and R. Jackson. 1987. Frictional–collisional constitutive relations for granular materials with application to plane shearing. Journal of Fluid Mechanics 176:67–93.
   Web of Science ®Google Scholar
• Jung, J., D. Gidaspow, and Isaac K. Gamwo. 2005. Measurement of two kinds of granular temperatures, stresses and dispersion in bubbling beds. Industrial & Engineering Chemistry Research 44:1329–1341.
   Web of Science ®Google Scholar
• Kim, Y. J., J. M. Lee, and S. D. Kim. 2000. Modeling of coal gasification in an internally circulating fluidized bed reactor with draught tube. Fuel 79:69.
   Web of Science ®Google Scholar
• Kim, Y. T., B. H. Song, and S. D. Kim. 1997. Entrainment of solids in an internally circulating fluidized bed with draft tube. Chemical Engineering Journal 66:105–110.
   Web of Science ®Google Scholar
• Kuipers, J. A. M., K. J. van Duin, F. P. H. van Beckum, and W. P. M. van Swaaij. 1992. A numerical model of gas-fluidized beds. Chemical Engineering Science 47:1913.
   Web of Science ®Google Scholar
• Lun, C. K. K., S. B. Savage, D. J. Jeffrey, and N. Chepurniy. 1984. Kinetic theories for granular flow:inelastic particles in Couette flow and slightly inelastic particles in a general flow field. Journal of Fluid Mechanics 140:223–256.
   Web of Science ®Google Scholar
• Marschall, K. J., and L. Mleczko. 1999. CFD modeling of an internally circulating fluidized-bed reactor. Chemical Engineering Science 54:2085–2093.
   Web of Science ®Google Scholar
• Mathiesen, V., T. Solberg, H. Arastoopour, and H. Hjertager. 1999. Experimental and computational study of multiphase gas-particle in a CFB riser. AIChE Journal 45:2503–2518.
   Web of Science ®Google Scholar
• McKeen, T., and T. Pugsley. 2003. Simulation and experimental validation of a freely bubbling bed of FCC catalyst. Powder Technology 129:139–152.
   Web of Science ®Google Scholar
• Müller, C. R., J. F. Davidson, J. S. Dennis, and A. L. Hayhurst. 2007. A study of the motion and eruption of a bubble at the surface of a two-dimensional fluidized bed using particle image velocimetry (PIV). Industrial & Engineering Chemistry Research 46:1642–1652.
   Web of Science ®Google Scholar
• Neri, A., and D. Gidaspow. 2000. Riser hydrodynamics: Simulation using kinetic theory. AIChE Journal 46:52–67.
   Web of Science ®Google Scholar
• Passalacqua, A., and L. Marmo. 2009. A critical comparison of frictional stress models applied to the simulation of bubbling fluidized beds. Chemical Engineering Science 64(12): 2795–2806.
   Web of Science ®Google Scholar
• Patankar, S. V. 1980. Numerical Heat Transfer and Fluid Flow. Newyork, NY: Hemisphere Publishing Corporation.
   Google Scholar
• Patil, D. J., M. van Sint Annaland, and J. A. M. Kuipers. 2005. Critical comparison of hydrodynamics models for gas–solid fluidized beds—part I: Bubbling gas–solid fluidized beds operated with a jet. Chemical Engineering Science 60:57–72.
   Web of Science ®Google Scholar
• Patil, D. J., and M. van Sint Annaland. 2005. Critical comparison of hydrodynamic models for gas–solid fluidized beds—Part II: freely bubbling gas–solid fluidized beds. Chemical Engineering Science 60:73–84.
   Web of Science ®Google Scholar
• Polashenski, W., and J. Chen. 1999. Measurement of particle stresses in fast fluidized beds. Industrial & Engineering Chemistry Research 38:705–713.
   Web of Science ®Google Scholar
• Reuge, N., L. Cadoret, C. Coufort-Saudejaud, S. Pannala, M. Syamlal, and B. Caussat. 2008. Multi-fluid Eulerian modeling of dense gas–solid fluidized bed hydrodynamics; influence of the dissipation parameters. Chemical Engineering Science 22:5540–5551.
   Web of Science ®Google Scholar
• Schaeffer, D. G. 1987. Instability in the Evolution Equations Describing Incompressible Granular Flow. Journal of Differential. Equations 66. 19–50. 1987
   Web of Science ®Google Scholar
• Shirvanian, P. A., and J. M. Calo. 2004. Hydrodynamic scaling of a rectangular spouted vessel with a draft duct. Chemical Engineering Journal 103:29–34.
   Web of Science ®Google Scholar
• Shuyan, W., L. Xiang, L. Huilin, Y. Long, S. Dan, H. Yurong, and D. Yonglong. 2009. Numerical simulations of flow behavior of gas and particles in spouted beds using frictional kinetic stresses model. Powder Technology 196:184–193.
   Web of Science ®Google Scholar
• Sinclair, J. L., and Jackson, R. 1983. Gas-particle flow in vertical pipe with particle–particle interaction. AIChE Journal 35:1473.
   Web of Science ®Google Scholar
• Srivastava, A., and S. Sundaresan. 2003. Analysis of a frictional-kinetic model for gas–particle flow. Powder Technology 129:72–85.
   Web of Science ®Google Scholar
• Syamlal, M., W. Rogers, and T. J. O'Brien. 1993. MFIX documentation: theory guide. In Technical Report DOE/METC-94/1004 (DE9400087). Morgantown Energy Technology Centre, Morgantown, West Virginia.
   Google Scholar
• Syamlal, M., and T. J. O'Brien. 1989. Computer simulation of bubbles in a fluidized bed. AIChE Symposium Series 85:22–31.
   Google Scholar
• Szafran, R. G., and A. Kmiec. 2007. Periodic fluctuations of flow and porosity in spouted beds. Transport in Porous Media 66:187–200.
   Web of Science ®Google Scholar
• van Wachem, B. G. M., J. C. Schouten, C. M. van den Bleek, R. Krishna, and J. L. Sinclair. 2001. Comparative analysis of CFD models of dense gas–solid systems. AIChE Journal 47(5): 1035–1051.
   Web of Science ®Google Scholar
• Wen, C. Y., and Y. H. Yu. 1966. Mechanics of fluidization. Chemical Engineering Progress Symposium Series 62:100–111.
   Google Scholar
• Xu, J., J. Tang, W. Wei, and X. Bao. 2009. Minimum spouting velocity in a spout-fluid bed with a draft tube. Canadian Journal of Chemical Engineering 87:274–278.
   Web of Science ®Google Scholar
• Yang, N., W. Wang, W. Ge, and J. Li. 2003. CFD simulation of concurrent-up gas–solid flow in circulating fluidized beds with structure-dependent drag coefficient. Chemical Engineering Journal 96:71–80.
   Web of Science ®Google Scholar
• Yang, T., T. Zhang, and H. T. Bi. 2008. A novel continuous reactor for catalytic reduction of NOx – Fixed bed simulation. Canadian Journal of Chemical Engineering 86(3):395–402
   Web of Science ®Google Scholar
• Zhao, X. L., S. Q. Li, G. Q. Liu, Q. Song, and Q. Yao. 2008. Flow patterns of solids in a two-dimensional spouted bed with draft plates: PIV measurement and DEM simulations. Powder Technology 183:79–87.
   Web of Science ®Google Scholar
• Zheng, Y., X. Wan, Z. Qian, F. Wei, and Y. Jin. 2001. Numerical simulation of the gas-particle turbulent flow in riser reactor based on k–ϵ–kp–_p–two-fluid model. Chemical Engineering Science 56:6813–6822.
   Web of Science ®Google Scholar
• Zimmermann, S., and F. Taghipour. 2005. CFD modeling of the hydrodynamics and reaction kinetics of FCC fluidized-bed reactors. Industrial & Engineering Chemistry Research 44:9818–9827.
   Web of Science ®Google Scholar