Magnetorheological methods for nanofinishing – a review

References

• Bayoumi, M. R., and A. K. Abdellatif. 1995. Effect of surface finish on fatigue strength. Engineering Fracture Mechanics 51(5):861–70. doi:10.1016/0013-7944(94)00297-u.
   Web of Science ®Google Scholar
• Bica, I. 2002. Damper with magnetorheological suspension. Journal of Magnetism and Magnetic Materials 241:196–200.
   Web of Science ®Google Scholar
• Brecker, J. N., R. Brown, T. Matsuo, K. Saito, J. A. Sweeney, J. B. Vansaun, and M. C. Shaw. 1969. Abrasive grain association on investigation of abrasive grain characteristics, 4th Annual Report. Carnegie Institute of Technology, Pittsburgh, Pennsylvania, USA.
   Google Scholar
• Cheng, H., Y. Yeung, and H. Tong. 2008. Viscosity behavior of magnetic suspensions in fluid-assisted finishing. Progress in Natural Science 18:91–96. doi:10.1016/j.pnsc.2007.07.007.
   Web of Science ®Google Scholar
• Cho, S.-S., Y.-K. Ryu, and S.-Y. Lee. 2002. Curved surface finishing with flexible abrasive tool. International Journal of Machine Tools and Manufacture 42:229–36. doi:10.1016/s0890-6955(01)00106-7.
   Web of Science ®Google Scholar
• Das, M., V. K. Jain, and P. S. Ghoshdastidar. 2008. Fluid flow analysis of magnetorheological abrasive flow finishing process. International Journal of Machine Tools and Manufacture 48:415–26. doi:10.1016/j.ijmachtools.2007.09.004.
   Web of Science ®Google Scholar
• Fox, M., K. Agrawal, T. Shinmura, and R. Komanduri. 1994. Magnetic abrasive finishing of rollers. CIRP Annals – Manufacturing Technology 43(1):181–84. doi:10.1016/s0007-8506(07)62191-x.
   Google Scholar
• Furst, E. M., and A. P. Gast. 2000. Micromechanics of magnetorheological suspensions. Physics Revolution E 61(6):6732–39. doi:10.1103/physreve.61.6732.
   PubMed Web of Science ®Google Scholar
• Genc, S., and P. P. Phule. 2002. Rheological properties of magnetorheological fluids. Smart Materials and Structures 11:140–46.
   Web of Science ®Google Scholar
• Golini, D., W. I. Kordonski, P. Dumas, and S. Hogan. 1999. Magnetorheological finishing (MRF) in commercial precision optics manufacturing. Proceeding of SPIE Conference on Optical Manufacturing and Testing 3782:80–91.
   Google Scholar
• Gorana, V. V., V. K. Jain, and G. K. Lal. 2004. Experimental investigation into cutting forces and active grain density during abrasive flow machining. International Journal of Machine Tools and Manufacture 44:201–11. doi:10.1016/j.ijmachtools.2003.10.004.
   Web of Science ®Google Scholar
• Hoshino, T., Y. Kurata, Y. Terasaki, and K. Susa. 2001. Mechanism of polishing of SiO2 film by CeO2 particles. Journal of Non-Crystalline Solids 283:129–36. doi:10.1016/s0022-3093(01)00364-7.
   Web of Science ®Google Scholar
• Jain, V. K. 2008. Abrasive-based nano-finishing techniques: An overview. Machining Science and Technology 12:257–94. doi:10.1080/10910340802278133.
   Web of Science ®Google Scholar
• Jain, V. K. 2009. Magnetic field assisted abrasive based micro-/nano-finishing. Journal of Materials Processing Technology 209:6022–38. doi:10.1016/j.jmatprotec.2009.08.015.
   Web of Science ®Google Scholar
• Jain, V. K., P. Kumar, P. K. Behera, and S. C. Jayswal. 2001. Effect of working gap and circumferential speed on the performance of magnetic abrasive finishing process. Wear 250:384–90. doi:10.1016/s0043-1648(01)00642-1.
   Web of Science ®Google Scholar
• Jha, S. 2006. Magnetorheological abrasive flow finishing (MRAFF) process. PhD. Thesis, Indian Institute of Technology: Kanpur, India.
   Google Scholar
• Jha, S., and V. K. Jain. 2004. Design and development of the magnetorheological abrasive flow finishing (MRAFF) process. International Journal of Machine Tools and Manufacture 44:1019–29. doi:10.1016/j.ijmachtools.2004.03.007.
   Web of Science ®Google Scholar
• Jha, S., and V. K. Jain. 2006. Modeling and simulation of surface roughness in magnetorheological abrasive flow finishing process. Wear 261:856–66. doi:10.1016/j.wear.2006.01.043.
   Web of Science ®Google Scholar
• Jung, B., K.-I. Jang, B.-K. Min, S. J. Lee, and J. Seok. 2009. Magnetorheological finishing process for hard materials using sintered iron-CNT compound abrasives. International Journal of Machine Tools and Manufacture 49:407–18. doi:10.1016/j.ijmachtools.2008.12.002.
   Web of Science ®Google Scholar
• Khanna, O. P. 2010. Lal, M. A text book of production technology. New Delhi, India: Dhanpat Rai publication.
   Google Scholar
• Kim, J.-D., Y.-H. Kang, Y.-H. Bae, and S.-W. Lee. 1997. Development of a magnetic abrasive jet machining system for precision internal polishing of circular tubes. Journal of Material Processing Technology 71:384–93. doi:10.1016/s0924-0136(97)00103-9.
   Web of Science ®Google Scholar
• Komanduri, R. 1996. On material removal mechanisms in finishing of advanced ceramics and glasses. CIRP Annals – Manufacturing Technology 45(1):509–14. doi:10.1016/s0007-8506(07)63113-8.
   Google Scholar
• Komanduri, R., D. A. Lucca, and Y. Tani. 1997. Technological advances in fine abrasive processes. CIRP Annals – Manufacturing Technology 46(2):545–96. doi:10.1016/s0007-8506(07)60880-4.
   Google Scholar
• Kordonski, W., D. Golini, P. Dumas, and S. Jacobs. 1998. Magnetorheological suspension based finishing technology. Proceeding of the SPIE 3326:527–35.
   Google Scholar
• Kordonski, W. I., S. Gordokin, and N. Zhuravski. 2001. Static yield stress in magnetorheological fluid. International Journal of Modern Physics 15(6–7):1078–84. doi:10.1007/s00397-009-0346-z.
   Web of Science ®Google Scholar
• Kordonski, W. I., and D. Golini. 1999. Fundamentals of magnetorheological fluid utilization in high precision finishing. Journal of Intelligent Material Systems and Structures 10(9):683–89. doi:10.1106/011m-cj25-64qc-f3a6.
   Web of Science ®Google Scholar
• Kordonski, W., and D. Golini. 1999. Progress update in magnetorheological finishing. International Journal of Modern Physics B 13:2205–12. doi:10.1142/s0217979299002320.
   Web of Science ®Google Scholar
• Kordonski, W. I., and S. D. Jacobs. 1996. Magnetorheological finishing. International Journal of Modern Physics B 10:2857–65.
   Web of Science ®Google Scholar
• Kordonski, W. I., and A. Shorey. 2007. Magnetorheological (MR) jet finishing technology. Journal of Intelligent Material Systems and structures 18:1127–30.
   Web of Science ®Google Scholar
• Lam, S. Y. 2000. Process monitoring of abrasive flow machining using a neural network predictive model. Technical paper, University of Pittsburgh, Pittsburgh, PA.
   Google Scholar
• Lambropoulo, S. J., F. Yang, and S. D. Jacob. 1996. Optical fabrication and testing. Technical Digest Series (Optical Society of America, Washington DC) 7:150–53.
   Google Scholar
• Lynah, P., and P. R. Hoffman. 1989. Machining metals handbook. Metals Park: American Society for Metals Ohio, USA.
   Google Scholar
• Matsuyama, S., H. Mimura, H. Yumoto, K. Yamamura, Y. Sano, K. Endo, Y. Mori, Y. Nishino, K. Tamasaku, T. Ishikawa, M. Yabashi, and K. Yamauchi. 2005. Diffraction-limited two-dimensional hard x-ray focusing at the 100 nm level using a Kirkpatrick-Baez mirror arrangement. Review of Scientific Instruments 76:083114. doi:10.1063/1.2005427.
   Web of Science ®Google Scholar
• Mimura, H., K. Yamauchi, K. Yamamura, A. Kubota, S. Matsuyama, Y. Sano, K. Ueno, K. Endo, Y. Nishino, K. Tamasaku, M. Yabashi, T. Ishikawa, and Y. Mori. 2004. Image quality improvement in a hard X-ray projection microscope using total reflection mirror optics. Journal of Synchrotron Radiation 11(4):343–46. doi:10.1107/s090904950401283x.
   PubMed Web of Science ®Google Scholar
• Mimura, H., H. Yumoto, S. Matsuyama, K. Yamamura, Y. Sano, K. Ueno, K. Endo, Y. Mori, M. Yabashi, K. Tamasaku, Y. Nishino, T. Ishikawa, and K. Yamauchi. 2005. Relative angle determinable stitching interferometry for hard X-ray reflective optics. Review of Scientific Instruments 76:045102. doi:10.1063/1.1868472.
   Web of Science ®Google Scholar
• Mori, Y., N. Ikawa, K. Sugiyama, T. Okuda, and K. Yamauchi. 2002. Elastic emission machining -2nd report -Stress field and feasibility of introduction and activation of lattice defects. Japan Society of Precision Engineers 51:1187–94.
   Google Scholar
• Mori, Y., K. Yamauchi, and K. Endo. 1987. Elastic Emission machining. Precision Engineering 9(3):123–28.
   Web of Science ®Google Scholar
• Mori, Y., K. Yamauchi, and K. Endo. 1988. Mechanism of atomic removal in elastic emission machining. Precision Engineering 10(1):24–28. doi:10.1016/0141-6359(88)90091-8.
   Web of Science ®Google Scholar
• Mori, Y., K. Yamauchi, K. Endo, T. Ide, H. Toyota, K. Nishizawa, and M. Hasegawa. 1990. Evaluation of elastic emission machined surface by scanning tunnelling microscopy. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 8:621–24. doi:10.1116/1.576357.
   Web of Science ®Google Scholar
• Nanz, G., and L. E. Camilletti. 1995. Modeling of chemical-mechanical polishing: A review. IEEE Transaction on Semiconductor Manufacturing 8:382–89. doi:10.1109/66.475179.
   Web of Science ®Google Scholar
• Niranjan, M. S., and S. Jha. 2014. Flow behaviour of biodisperse MR polishing fluid and ball end MR finishing. Procedia Materials Science 6:798–804. doi:10.1016/j.mspro.2014.07.096.
   Google Scholar
• Nowicki, B., and M. Szafarczyk. 1993. The new method of freeforms surface honing, CIRP Annuals – Manufacturing Technology 42(1):425–28. doi:10.1016/s0007-8506(07)62477-9.
   Google Scholar
• Owat, S. 2002. Flat surface lapping: Process modeling in an intelligent environment. PhD. Dissertation, University of Pittsburgh, PA.
   Google Scholar
• Pa, P. S. 2009. Magnetic assistance in cylinder-surfaces finish. Materials and Manufacturing Processes 24(7):819–23. doi:10.1080/10426910902917223.
   Web of Science ®Google Scholar
• Park, B. J., K. H. Song, and H. J. Choi. 2009. Magnetic carbonyl iron nano particle based magnetorheological suspension and its characteristics. Materials Letters 63:1350–52. doi:10.1016/j.matlet.2009.03.013.
   Web of Science ®Google Scholar
• Patel, R. 2011. Mechanism of chain formation in nano fluid based MR fluids. Journal of Magnetism and Magnetic Materials 323:1360–63. doi:10.1016/j.jmmm.2010.11.046.
   Web of Science ®Google Scholar
• Rhoades, L. J. 1988. Abrasive flow machining. Manufacturing Engineering 1:75–78.
   Google Scholar
• Ruben, H. J. 1987. In Advances in surface treatments, ed. A. Niku-Lari, 5:239. Oxford, United Kingdom: Pergamon Press.
   Google Scholar
• Sadiq, A., and M. S. Shunmugan. 2009. Investigation into magnetorheological abrasive honing (MRAH). International Journal of Machine Tools and Manufacture 49:554–60. doi:10.1016/j.ijmachtools.2009.02.009.
   Web of Science ®Google Scholar
• Sadiq, A., and M. S. Shunmugan. 2010. A novel method to improve finish on non-magnetic surface in magnetorheological abrasive honing process. Tribology International 43:1122–26. doi:10.1016/j.triboint.2009.12.038.
   Web of Science ®Google Scholar
• Salmon, S. C. 1992. Modern grinding process technology. New York, USA: Mc Graw Hill.
   Google Scholar
• Schmitt, C., D. Bahre, K. Forsch, and K. Klein. 2011. Feinstbearbeiten hochgenauer Bohrungen durch Honen. Jahrbuch Schleifen, Honen, Läppen und Polieren. Fine machining of precise bores through honing yearbook grinding, honing, lapping and polishing: methods and machines, 65. Volcano press, Germany.
   Google Scholar
• Schnitzler, G. 2001. What’s happening with honing. Manufacturing Engineering 127(5):70–72, 75–77.
   Google Scholar
• Seok, J., Y.-J. Kim, K.-I. Jang, B.-K. Min, and S. J. Lee. 2007. A study on the fabrication of curved surfaces using magnetorheological fluid finishing. International Journal of Machine Tools and Manufacture 47(14):2077–90. doi:10.1016/j.ijmachtools.2007.05.007.
   Web of Science ®Google Scholar
• Shaw, M. C. 1996. Principles of abrasive processing. Oxford, United Kingdom: Clarendon Press.
   Google Scholar
• Shinmura, T., K. Takazawa, E. Hatano, and T. Aizawa. 1985. Study on magnetic abrasive process- process principles and finishing possibility. Bulletin of the Japan Society of Precision Engineering 19(1):54–55.
   Google Scholar
• Shinmura, T., K. Takazawa, E. Hatano, and M. Matsunaga. 1990. Study on magnetic abrasive finishing. Annals of CIRP 39(1):325–28.
   Google Scholar
• Shiou, F.-J., and C.-H. Chen. (2003) Freeforms surface finish of plastics injection mold by using ball burnishing process. Journal of Materials Processing Technology 140:248–54. doi:10.1016/s0924-0136(03)00750-7.
   Web of Science ®Google Scholar
• Shorey, A. B., S. D. Jacobs, W. I. Kordonski, and R. F. Gans. 2001. Experiments and observations regarding mechanism of glass removal in magnetorheological finishing. Applied Optics 40(1):20–33. doi:10.1364/ao.40.000020.
   PubMed Web of Science ®Google Scholar
• Sidpara, A., M. Das, and V. K. Jain. 2009. Rheological characterization of magnetorheological finishing fluid. Materials and Manufacturing Processes 24(2):1467–78. doi:10.1080/10426910903367410.
   Web of Science ®Google Scholar
• Sidpara, A., and V. K. Jain. 2011. Experimental investigations into forces during magnetorheological fluid based finishing process. International Journal of Machine Tools and Manufacture 51:358–62. doi:10.1016/j.ijmachtools.2010.12.002.
   Web of Science ®Google Scholar
• Sidpara, A., and V. K. Jain. 2012. Nano-level finishing of single crystal silicon blank using magnetorheological finishing process. Tribology International 47:156–66. doi:10.1016/j.triboint.2011.10.008.
   Web of Science ®Google Scholar
• Sidpara, A., and V. K. Jain. 2012. Theoretical analysis of forces in magnetorheological fluid based finishing process. International Journal of Material Sciences 56:50–59. doi:10.1016/j.ijmecsci.2012.01.001.
   Google Scholar
• Sidpara, A., and V. K. Jain. 2013. Analysis of forces on the free form surface in magnetorheological fluid based finishing process. International Journal of Machine Tools and Manufacture 69:1–10.
   Web of Science ®Google Scholar
• Singh, A. K., S. Jha, and P. M. Pandey. 2012. Nanofinishing of a typical 3D ferromagnetic workpiece using a ball end magnetorheological finishing process. International Journal of Machine tools and Manufacture 63:21–31. doi:10.1016/j.ijmachtools.2012.07.002.
   Web of Science ®Google Scholar
• Singh, A. K., S. Jha, and P. M. Pandey. 2012. Nanofinishing of fused silica glass using ball end magnetorheological finishing tool. Materials and Manufacturing Processes 27:1139–44. doi:10.1080/10426914.2011.654159.
   Web of Science ®Google Scholar
• Singh, A. K., S. Jha, and P. M. Pandey. 2012. Performance evaluation of improved ball end magnetorheological finishing process. World Academy of Science and Technology 6:1193–97.
   Google Scholar
• Singh, A. K., S. Jha, and P. M. Pandey. 2013. Mechanism of material removal in ball end magnetorheological finishing process. Wear 302:1180–91. doi:10.1016/j.wear.2012.11.082.
   Web of Science ®Google Scholar
• Singh, A. K., S. Jha, and P. M. Pandey. 2011. Design and development of nanofinishing process for 3D surfaces using ball end MR finishing tool. International Journal of Machine Tools and Manufacture 51:142–51. doi:10.1016/j.ijmachtools.2010.10.002.
   Web of Science ®Google Scholar
• Susan-Resiga, D., D. Bica, and L. Vékás. 2010. Flow behaviour of extremely bidisperse magnetisable fluids. Journal of Magnetism and Magnetic Materials 322:3166–72. doi:10.1016/j.jmmm.2010.05.055.
   Web of Science ®Google Scholar
• Todd, R., D. Allen, and L. Alting. 1994. Honing. In Manufacturing processes, 238. New York, USA: Industrial Press Inc.
   Google Scholar
• Tolinski, M. 2008. High-performance honing: Combination of honing process equipment and tooling create highly finished surfaces. Manufacturing Engineering 140(6):57–68.
   Google Scholar
• Tricard, M., W. I. Kordonski, A. B. Shorey, and C. Evans. 2006. Magnetorheological jet finishing of conformal, freeform and steep concave optics. CIRP Annals- Manufacturing Technology 55(1):309–12. doi:10.1016/s0007-8506(07)60423-5.
   Web of Science ®Google Scholar
• Uhlmann, E., M. Doits, and C. Schmiedel. 2013. Development of a material model for visco-elastic abrasive medium in abrasive flow machining. Procedia CIRP 8:351–56. doi:10.1016/j.procir.2013.06.115.
   Google Scholar
• Umehara, N., T. Kirtane, R. Gerlick, V. K. Jain, and R. Komanduri. 2005. A new apparatus for finishing large size large batch silicon nitride (Si3N4) balls for hybrid bearing applications by magnetic float polishing (MFP). International Journal of Machine Tools and Manufacture 46:151–69. doi:10.1016/j.ijmachtools.2005.04.015.
   Web of Science ®Google Scholar
• Wu, X., Y. Kita, and K. Ikoku. 2007. New polishing technology of freeform surface by GC. Journal of Materials Processing Technology 187–188:81–84. doi:10.1016/j.jmatprotec.2006.11.218.
   Web of Science ®Google Scholar
• Yamaguchi, H., and T. Shinmura. 1999. Study of the surface modification resulting from an internal magnetic abrasive finishing process. Wear 225–229:246–55. doi:10.1016/s0043-1648(99)00013-7.
   Web of Science ®Google Scholar
• Yamaguchi, H., and T. Shinmura. 2004. Internal finishing process for alumina ceramic components by a magnetic field assisted finishing process. Precision Engineering 28:135–42. doi:10.1016/j.precisioneng.2003.07.001.
   Web of Science ®Google Scholar
• Yamauchi, K., K. Hirose, H. Goto, K. Sugiyama, K. Inagaki, K. Yamamura, Y. Sano, and Y. Mori. 1999. First-principles simulations of removal process in EEM (elastic emission machining). Computational Materials Science 14(1–4):232–35. doi:10.1016/s0927-0256(98)00112-8.
   Web of Science ®Google Scholar
• Yamauchi, K., H. Mimura, H. Inagaki, and Y. Mori. 2002. Figuring with sub nanometer level accuracy by numerically controlled elastic emission machining. Review of Scientific Instruments 73:4028–33. doi:10.1063/1.1510573.
   Web of Science ®Google Scholar
• Yamauchi, K., K. Yamamura, H. Mimura, Y. Sano, A. Saito, A. Souvorov, M. Yabashi, K. Tamasaku, T. Ishikawa, and Y. Mori. 2002. Nearly diffraction-limited line focusing of a hard x-ray beam with a elliptically figures mirror. Journal of Synchrotron Radiation 9:313–16. doi:10.1107/s0909049502012578.
   PubMed Web of Science ®Google Scholar
• Yin, S., and T. Shinmura. 2004. Vertical-assisted magnetic abrasive finishing and deburring for magnesium alloy. International Journal of Machine Tools and Manufacture 44:1297–303. doi:10.1016/j.ijmachtools.2004.04.023.
   Web of Science ®Google Scholar
• Yumoto, H., H. Mimura, S. Matsuyama, H. Hara, K. Yamamura, Y. Sano, K. Ueno, K. Endo, Y. Mori, M. Yabashi, Y. Nishino, K. Tamasaku, T. Ishikawa, and K. Yamauchi. 2005. Fabrication of elliptically figured mirror for focusing hard x-rays to size less than 50 nm. Review of Scientific Instruments 76:063708. doi:10.1063/1.1922827.
   Web of Science ®Google Scholar
• Zantye, P. B., A. Kumar, and A. K. Sikder. 2004. Chemical mechanical planarization for micro- electronics applications. Material Science and Technology R 45:189–220.
   Google Scholar