Study on the flow behavior of irregular plastic particles in a spout-fluid bed with a draft tube

References

• Altzibar, H., G. Lopez, J. Bilbao, and M. Olazar. 2013. Minimum spouting velocity of conical spouted beds equipped with draft tubes of different configuration. Industrial & Engineering Chemistry Research 52 (8):2995–3006. doi:10.1021/ie302407f
   Web of Science ®Google Scholar
• Bashapaka, S. K., and V. V. Ananthula. 2015. Pressure drop and gas holdup studies in a spout-fluid bed. Particulate Science and Technology 33 (1):91–96. doi:10.1080/02726351.2014.939316
   Web of Science ®Google Scholar
• Dora, D. T. K., Mohanty, Y. K., and G. K. Roy. 2012. Hydrodynamics of three-phase fluidization of a homogeneous ternary mixture of irregular particles. Chemical Engineering Science 79:210–18. doi:10.1016/j.ces.2012.04.035
   Web of Science ®Google Scholar
• Guo, J., Y. Tang, and Z. Xu. 2010. Wood plastic composite produced by nonmetals from pulverized waste printed circuit boards. Environmental Science & Technology 44 (1):463–68. doi:10.1021/es902889b
   PubMed Web of Science ®Google Scholar
• He, Y., S. Yan, T. Wang, B. Jiang, and Y. Huang. 2016. Hydrodynamic characteristics of gas-irregular particle two-phase flow in a bubbling fluidized bed: An experimental and numerical study. Powder Technology 287:264–76. doi:10.1016/j.powtec.2015.10.012
   Web of Science ®Google Scholar
• Jena, H. M., G. K. Roy, and K. C. Biswal. 2008. Studies on pressure drop and minimum fluidization velocity of gas–solid fluidization of homogeneous well-mixed ternary mixtures in un-promoted and promoted square bed. Chemical Engineering Journal 145 (1):16–24. doi:10.1016/j.cej.2008.02.013
   Web of Science ®Google Scholar
• Kumar, B. S., and A. V. Vinod. 2016. Mixing characteristics of binary mixtures in a spout-fluid bed. Particulate Science and Technology 35:183–91. doi:10.1080/02726351.2016.1146810
   Web of Science ®Google Scholar
• Kunii, D., and O. Levenspiel. 1991. Fluidization engineering. 2nd ed. London: Butterworth-Heinemann.
   Google Scholar
• Link, J. M., L. A. Cuypers, N. G. Deen, and J. A. M. Kuipers. 2005. Flow regimes in a spout-fluid bed: A combined experimental and simulation study. Chemical Engineering Science 60 (13):3425–42. doi:10.1016/j.ces.2005.01.027
   Web of Science ®Google Scholar
• Littman, H., D. V. Vukovic, F. K. Zdanski, and Ž. B. Grbavčić. 2009. Pressure drop and flowrate characteristics of a liquid phase spout-fluid bed at the minimum spout-fluid flowrate. Canadian Journal of Chemical Engineering 52 (2):174–79. doi:10.1002/cjce.5450520207
   Google Scholar
• Mathur, K. B., and N. Epstein. 1974. Spouted beds. New York: Academic Press.
   Google Scholar
• Nagashima, H., T. Ishikura, and M. Ide. 2011. Flow regimes and vertical solids conveying in a spout-fluid bed with a draft tube. Canadian Journal of Chemical Engineering 89 (2):264–73. doi:10.1002/cjce.20403
   Web of Science ®Google Scholar
• Oliveira, T. J. P., C. R. Cardoso, and C. H. Ataíde. 2013. Bubbling fluidization of biomass and sand binary mixtures: Minimum fluidization velocity and particle segregation. Chemical Engineering & Processing Process Intensification 72 (10):113–21. doi:10.1016/j.cep.2013.06.010
   Web of Science ®Google Scholar
• Plawsky, J. L., H. Littman, and J. D. Paccione. 2010. Design, simulation, and performance of a draft tube spout fluid bed coating system for aerogel particles. Powder Technology 199 (2):131–38. doi:10.1016/j.powtec.2009.12.009
   Web of Science ®Google Scholar
• Ren, B., W. Zhong, B. Jin, Y. Shao, and Z. Yuan. 2013. Numerical simulation on the mixing behavior of corn-shaped particles in a spouted bed. Powder Technology 234 (1):58–66. doi:10.1016/j.powtec.2012.09.024
   Web of Science ®Google Scholar
• Santos, K. G., A. V. P. Campos, L. V. Ferreira, R. C. Santana, and M. A. S. Barrozo. 2013. Fluid dynamics of a sand-biomass mixture in a spouted-bed reactor for fast pyrolysis. Chemical Engineering & Technology 36 (12):2148–54. doi:10.1002/ceat.201300356
   Web of Science ®Google Scholar
• Srinivas, G., and Y. P. Setty. 2015. A study of CFD modeling on variation of solid fraction in a batch fluidized bed. Particulate Science and Technology 33 (6):610–16. doi:10.1080/02726351.2015.1014078
   Web of Science ®Google Scholar
• Su, G., G. Huang, M. Li, and C. Liu. 2014. Study on the flow behavior in spout-fluid bed with a draft tube of sub-millimeter grade silicon particles. Chemical Engineering Journal 237:277–85. doi:10.1016/j.cej.2013.10.029
   Web of Science ®Google Scholar
• Sun, Z., Z. Shen, X. Zhang, and S. Ma. 2014. Novel recycling of nonmetal particles from waste printed wiring boards to produce porous composite for sound absorbing application. Environmental Technology 35 (9–12):1269–76. doi:10.1080/09593330.2013.865792
   PubMed Web of Science ®Google Scholar
• Sutkar, V. S., N. G. Deen, and J. A. M. Kuipers. 2013. Spout fluidized beds: Recent advances in experimental and numerical studies. Chemical Engineering Science 86 (5):124–36. doi:10.1016/j.ces.2012.06.022
   Web of Science ®Google Scholar
• Wu, M., Q. Guo, and L. Liu. 2014. Hydrodynamic performance of a spout-fluid bed with draft tube at different temperatures. Industrial & Engineering Chemistry Research 53 (5):1999–2010. doi:10.1021/ie4034494
   Web of Science ®Google Scholar
• Yang, W. C. 2003. Handbook of fluidization and fluid-particle systems. 1st ed. New York: Marcel Dekker.
   Google Scholar
• Zhang, Y., B. Jin, and W. Zhong. 2009. Experimental investigation on mixing and segregation behavior of biomass particle in fluidized bed. Chemical Engineering & Processing Process Intensification 48 (3):745–54. doi:10.1016/j.cep.2008.09.004
   Web of Science ®Google Scholar