Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites

References

• Ankush, S., R. Narayan, and R. D. Gupta. 2013. Evaluation & comparison of mechanical properties of aluminium alloy 5052 reinforced with silicon carbide, graphite and fly ash hybrid metal matrix composites. International Journal of Engineering Science and Technology 5 (10):1780–87.
   Google Scholar
• Babu, J. S. S., C. G. Kang, and H. H. Kim. 2011. Dry sliding wear behavior of aluminum based hybrid composites with graphite nanofiber–alumina fiber. Materials and Design 32:3920–925. doi:10.1016/j.matdes.2011.02.064
   Web of Science ®Google Scholar
• Cocen, U., and K. Onel. 2002. Ductility and strength of extruded SiCp/ aluminium alloy composites. Composites Science and Technology 62 (2): 275–82. doi:10.1016/S0266-3538(01)00198-1
   Web of Science ®Google Scholar
• Corrochano, J., J. C. Walker, M. Lieblich, J. Ibáñez, and W. M. Rainforth. 2011. Dry sliding wear behaviour of powder metallurgy Al–Mg–Si alloy-MoSi2 composites and the relationship with the microstructure. Wear 270 (9–10): 658–65. doi:10.1016/j.wear.2011.01.029
   Web of Science ®Google Scholar
• Dinaharan, I., and N. Murugan. 2012. Dry sliding wear behavior of AA6061/ZrB2 in-situ composite. Transaction of Nonferrous Materials Society of China 22:810–18. doi:10.1016/S1003-6326(11)61249-1
   Web of Science ®Google Scholar
• Ezatpour, H. R., S. A. Sajjadi, M. H. Sabzevar, and Y. Huang. 2014. Investigation of microstructure and mechanical properties of Al6061-nanocomposite fabricated by stir casting. Materials and Design 55:921–28. doi:10.1016/j.matdes.2013.10.060
   Web of Science ®Google Scholar
• Feng, Y. C., L. Geng, P. Q. Zheng, Z. Z. Zheng, and G. S. Wang. 2008. Fabrication and characteristic of Al-based hybrid composite reinforced with tungsten oxide particle and aluminum borate whisker by squeeze casting. Materials and Design 29 (10): 2023–26. doi:10.1016/j.matdes.2008.04.006
   Web of Science ®Google Scholar
• Jin, P. p., G. Chen, L. Han, and J.-h. Wang. 2014. Dry sliding friction and wear behaviors of Mg2B2O5 whisker reinforced 6061Al matrix composites, Transaction of Nonferrous Materials Society of China 24:49–57. doi:10.1016/S1003-6326(14)63027-2
   Web of Science ®Google Scholar
• Kumar, S., and V. Balasubramanian. 2010. Effect of reinforcement size and volume fraction on the abrasive wear behavior of AA7075Al/SiCp P/M composites: A statistical analysis. Tribology International 43 (1–2): 414–22. doi:10.1016/j.triboint.2009.07.003
   Web of Science ®Google Scholar
• Lekatou, A., A. E. Karantzalis, A. Evangelou, V. Gousia, G. Kaptay, Z. Gácsi, P. Baumli, and A. Simon. 2015. Aluminium reinforced by WC and TiC nanoparticles (ex-situ) and aluminide particles (in-situ): Microstructure, wear and corrosion behavior. Materials and Design 65:1121–135. doi:10.1016/j.matdes.2014.08.040
   Web of Science ®Google Scholar
• Mahdavi, S., and F. Akhlaghi. 2011. Effect of the graphite content on the tribological behavior of Al/Gr and Al/30SiC/Gr composites processed by in situ powder metallurgy (IPM) method. Tribology Letters 44 (1): 1–12. doi:10.1007/s11249-011-9818-2
   Web of Science ®Google Scholar
• Manoj, S., D. D. Dwivedi, S. Lakhvir, and V. Chawla. 2009. Development of aluminium based sic particulate metal matrix composite. Journal of Minerals & Materials Characterization & Engineering 8 (6):455–67.
   Google Scholar
• Miracle, D. B. 2005. Metal matrix composites: From science to technological significance. Composites Science and Technology 65 (15–16): 2526–40. doi:10.1016/j.compscitech.2005.05.027
   Web of Science ®Google Scholar
• Mohammad Sharifi, E., and F. Karimzadeh. 2011. Wear behavior of aluminum matrix hybrid nanocomposites fabricated by powder metallurgy. Wear 271 (7–8): 1072–79. doi:10.1016/j.wear.2011.05.015
   Web of Science ®Google Scholar
• Natatajan, N., S. Vijayarangan, and I. Rajendran. 2006. Wear behavior of A356/25SiCp aluminium matrix composites sliding against automobile friction material. Wear 261(7–8):812–22. doi:10.1016/j.wear.2006.01.011
   Web of Science ®Google Scholar
• Ramesh, C. S., S. Pramod, and R. Keshavamurthy. 2011. A study on microstructure and mechanical properties of Al6061–TiB2 in-situ composites. Materials Science and Engineering A 528:4125–132. doi:10.1016/j.msea.2011.02.024
   Web of Science ®Google Scholar
• Ravichandran, M., and S. Dineshkumar. 2016. Experimental investigations on Al-TiO2-Gr hybrid composites fabricated through stir casting route. Materials Testing 58 (3):211–17.
   Web of Science ®Google Scholar
• Ravichandran, M., and V. Anandakrishnan. 2015. Optimization of powder metallurgy parameters to attain maximum strength coefficient in Al–10 wt.% MoO3 composite. Journal of Materials Research 30 (15): 2380–87. doi:10.1557/jmr.2015.211
   Web of Science ®Google Scholar
• Sajjadi, S. A., H. R. Ezatpour, and M. Torabi Parizi. 2012. Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes. Materials and Design 34:106–11. doi:10.1016/j.matdes.2011.07.037
   Web of Science ®Google Scholar
• Suresh, S., N. Shenbaga Vinayaga Moorthi, S. C. Vettivel, and N. Selvakumar. 2014. Mechanical behavior and wear prediction of stir cast Al–TiB2 composites using response surface methodology. Materials and Design 59:383–96. doi:10.1016/j.matdes.2014.02.053
   Web of Science ®Google Scholar
• Ted Guo, M. L., and C.-Y. A. Tsao. 2000. Tribological behavior of self-lubricating aluminium/SiC/graphite hybrid composites synthesized by the semi-solid powder-densification method. Composites Science and Technology 60 (1): 65–74. doi:10.1016/S0266-3538(99)00106-2
   Web of Science ®Google Scholar
• Umanath, K., K. Palanikumar, and S. T. Selvamani. 2013. Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metalmatrix composites. Composites: Part B 53:159–168. doi:10.1016/j.compositesb.2013.04.051
   Web of Science ®Google Scholar
• Zamri, Y. B., J. B. Shamsul, and M. M. Amin. 2011. Potential of palm oil clinker as reinforcement in aluminium matrix composites for tribological applications. International Journal of Mechanical and Materials Engineering 6 (1):10–17.
   Google Scholar