References
- Alizadeh-Gheshlaghi, E., B. Shaabani, A. Khodayari, Y. Azizian-Kalandaragh, and R. Rahimi. 2012. Investigation of the catalytic activity of nano-sized CuO, Co3O4 and CuCo2O4 powders on thermal decomposition of ammonium perchlorate. Powder Technology 217:330–9. doi: https://doi.org/10.1016/j.powtec.2011.10.045.
- Apperson, S. J., A. V. Bezmelnitsyn, R. Thiruvengadathan, K. Gangopadhyay, S. Gangopadhyay, W. A. Balas, P. E. Anderson, and S. M. Nicolich. 2009. Characterization of nanothermite material for solid fuel microthruster applications. Journal of Propulsion and Power 25 (5):1086–91. doi: https://doi.org/10.2514/1.43206.
- Gibot, P. 2019. Templated synthesis of Cr2O3 material for energetic composites with high performance. Solid State Sciences 94:162–7. doi: https://doi.org/10.1016/j.solidstatesciences.2019.05.014.
- Jian, G., S. Chowdhury, K. Sullivan, and M. R. Zachariah. 2013. Nanothermite reactions: Is gas phase oxygen generation from the oxygen carrier an essential prerequisite to ignition? Combustion and Flame 160 (2):432–7. doi: https://doi.org/10.1016/j.combustflame.2012.09.009.
- Joshi, A., K. K. S. Mer, S. Bhattacharya, and V. K. Patel. 2019. Different approaches to micro-/nanofabricate and pattern energetic materials. In Nano-energetic materials, eds. S. Bhattacharya, A. Kumar Agarwal, T. Rajagopalan, and V. K. Patel, 177–88. Singapore: Springer.
- Kant, R., G. Bhatt, V. K. Patel, A. Ganguli, D. Singh, M. Nayak, K. Mishra, A. Gupta, K. Gangopadhyay, S. Gangopadhyay, et al. 2019. Synchronized electromechanical shock wave-induced bacterial transformation. ACS Omega 4 (5):8512–21. doi: https://doi.org/10.1021/acsomega.9b00202.
- Kappagantula, K., M. L. Pantoya, and E. M. Hunt. 2012. Impact ignition of aluminum-teflon based energetic materials impregnated with nano-structured carbon additives. Journal of Applied Physics 112 (2):024902. doi: https://doi.org/10.1063/1.4737118.
- Kappagantula, K., and M. L. Pantoya. 2012. Experimentally measured thermal transport properties of aluminum-polytetrafluoroethylene nanocomposites with graphene and carbon nanotube additives. International Journal of Heat and Mass Transfer 55 (4):817–24. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2011.10.026.
- Kim, S. H., and M. R. Zachariah. 2004. Enhancing the rate of energy release from nanoenergetic materials by electrostatically enhanced assembly. Advanced Materials 16 (20):1821–5. doi: https://doi.org/10.1002/adma.200306436.
- Korampally, M., S. J. Apperson, C. S. Staley, J. A. Castorena, R. Thiruvengadathan, K. Gangopadhyay, R. R. Mohan, A. Ghosh, L. P. Parada, and S. Gangopadhyay. 2012. Transient pressure mediated intranuclear delivery of FITC-Dextran into chicken cardiomyocytes by MEMS-based nanothermite reaction actuator. Sensors and Actuators B: Chemical 171–172:1292–6. doi: https://doi.org/10.1016/j.snb.2012.06.081.
- Lide, D. R. 2005. Properties of the elements and inorganic compounds. In CRC handbook of chemistry and physics, ed. D. R. Lide. Boca Raton, FL: CRC Press.
- Martirosyan, K. S., L. Wang, and D. Luss. 2009. Novel nanoenergetic system based on iodine pentoxide. Chemical Physics Letters 483 (1–3):107–10. doi: https://doi.org/10.1016/j.cplett.2009.10.038.
- Mehendale, B., R. Shende, S. Subramanian, S. Gangopadhyay, P. Redner, D. Kapoor, and S. Nicolich. 2006. Nanoenergetic composite of mesoporous iron oxide and aluminum nanoparticles. Journal of Energetic Materials 24 (4):341–60. doi: https://doi.org/10.1080/07370650600896715.
- Mousavian, R. T., R. M. Larki, S. Behnamfard, P. J. Shiviari, and D. Brabazon. 2019. Thermal analysis of mechanically activated Al-(Fe2O3, MoO3, and MnO2) metastable intermolecular composites. Materials Research Express 6 (5):055516.
- Patel, V. K. 2013. Sonoemulsion synthesis of long CuO nanorods with enhanced catalytic thermal decomposition of potassium perchlorate. Journal of Cluster Science 24 (3):821–8. doi: https://doi.org/10.1007/s10876-013-0579-y.
- Patel, V. K., and S. Bhattacharya. 2013. High-performance nanothermite composites based on aloe-vera-directed CuO nanorods. ACS Applied Materials & Interfaces 5 (24):13364–74. doi: https://doi.org/10.1021/am404308s.
- Patel, V. K., and S. Bhattacharya. 2017. Solid state green synthesis and catalytic activity of CuO nanorods in thermal decomposition of potassium periodate. Materials Research Express 4 (9):095012. doi: https://doi.org/10.1088/2053-1591/aa8822.
- Patel, V. K., A. Ganguli, R. Kant, and S. Bhattacharya. 2015. Micropatterning of nanoenergetic films of Bi2O3/Al for pyrotechnics. RSC Advances 5 (20):14967–73. doi: https://doi.org/10.1039/C4RA15476B.
- Patel, V. K., R. Kant, A. Choudhary, M. Painuly, and S. Bhattacharya. 2019. Performance characterization of Bi2O3/Al nanoenergetics blasted micro-forming system. Defence Technology 15 (1):98–105. doi: https://doi.org/10.1016/j.dt.2018.07.005.
- Patel, V. K., J. K. Katiyar, and S. Bhattacharya. 2019. Solid Energetic materials-based microthrusters for space applications. In Nano-energetic materials, eds. S. Bhattacharya, A. Kumar Agarwal, T. Rajagopalan, and V. K. Patel, 241–50. Singapore: Springer.
- Patel, V. K., J. R. Saurav, K. Gangopadhyay, S. Gangopadhyay, and S. Bhattacharya. 2015. Combustion characterization and modeling of novel nEMs of Co3O4/nAl. RSC Advances 5 (28):21471–9. doi: https://doi.org/10.1039/C4RA14751K.
- Patel, V. K., P. Sundriyal, and S. Bhattacharya. 2017. Aloe vera vs. poly (ethylene) glycol-based synthesis and relative catalytic activity investigations of ZnO nanorods in thermal decomposition of potassium perchlorate. Particulate Science and Technology 35 (3):361–8. doi: https://doi.org/10.1080/02726351.2016.1163299.
- Petrantoni, M., C. Rossi, L. Salvagnac, V. Conedera, A. Esteve, C. Tenailleau, P. Alphonse, and Y. J. Chabal. 2010. Multilayered Al/CuO thermite formation by reactive magnetron sputtering: Nano versus micro. Journal of Applied Physics 108 (8):084323. doi: https://doi.org/10.1063/1.3498821.
- Pezous, H., C. Rossi, M. Sanchez, F. Mathieu, X. Dollat, S. Charlot, L. Salvagnac, and V. Conédéra. 2010. Integration of a MEMS based safe arm and fire device. Sensors and Actuators A: Physical 159 (2):157–67. doi: https://doi.org/10.1016/j.sna.2010.03.017.
- Puszynski, J. A., C. J. Bulian, and J. J. Swiatkiewicz. 2007. Processing and ignition characteristics of aluminum-bismuth trioxide nanothermite system. Journal of Propulsion and Power 23 (4):698–706. doi: https://doi.org/10.2514/1.24915.
- Rai, A., K. Park, L. Zhou, and M. R. Zachariah. 2006. Understanding the mechanism of aluminium nanoparticle oxidation. Combustion Theory and Modelling 10 (5):843–59. doi: https://doi.org/10.1080/13647830600800686.
- Son, S. F., B. W. Asay, T. J. Foley, R. A. Yetter, M. H. Wu, and G. A. Risha. 2007. Combustion of nanoscale Al/MoO3 thermite in microchannels. Journal of Propulsion and Power 23 (4):715–21. doi: https://doi.org/10.2514/1.26090.
- Taton, G., D. Lagrange, V. Conedera, L. Renaud, and C. Rossi. 2013. Micro-chip initiator realized by integrating Al/CuO multilayer nanothermite on polymeric memberane. Journal of Micromechanics and Microengineering 23 (10):105009–16. doi: https://doi.org/10.1088/0960-1317/23/10/105009.
- Thiruvengadathan, R., A. Bezmelnitsyn, S. Apperson, C. Staley, P. Redner, W. Balas, S. Nicolich, D. Kapoor, K. Gangopadhyay, and S. Gangopadhyay. 2011. Combustion characteristics of novel hybrid nanoenergetic formulations. Combustion and Flame 158 (5):964–78. doi: https://doi.org/10.1016/j.combustflame.2011.02.004.
- Wang, Y., X. Xia, J. Zhu, Y. Li, X. Wang, and X. Hu. 2010. Catalytic activity of nanometer-sized CuO/Fe2O3 on thermal decomposition of AP and combustion of AP-based propellant. Combustion Science and Technology 183 (2):154–62. doi: https://doi.org/10.1080/00102202.2010.507561.
- Xu, D., Y. Yang, H. Cheng, Y. Y. Li, and K. Zhang. 2012. Integration of nano-Al with Co3O4 nanorods to realize high-exothermic core–shell nanoenergetic materials on a silicon substrate. Combustion and Flame 159 (6):2202–9. doi: https://doi.org/10.1016/j.combustflame.2012.01.022.
- Zhang, J. Y., X. Y. Guo, Q. J. Jiao, H. L. Zhang, and H. Li. 2018. Analysis of the thermal behaviour of CL-20, potassium perchlorate, lithium perchlorate, and their admixtures by DSC and TG. Central European Journal of Energetic Materials 15 (1):115–30. doi: https://doi.org/10.22211/cejem/78089.
- Zhang, K., C. Rossi, G. A. A. Rodriguez, C. Tenailleau, and P. Alphonse. 2007. Development of a nano-Al/CuO based energetic material on silicon substrate. Applied Physics Letters 91 (11):113117. doi: https://doi.org/10.1063/1.2785132.