Flow behavior of magnetic steel powder

References

• Abbasfard, H., G. Evans, and R. Moreno-Atanasio. 2016. Effect of Van der Waals force cut-off distance on adhesive collision parameters in DEM simulation. Powder Technology 299:9–18. doi: https://doi.org/10.1016/j.powtec.2016.05.020.
   Web of Science ®Google Scholar
• Abbasi-Khazaei, B., and A. Mollaahmadi. 2017. Rapid tempering of martensitic stainless steel AISI420: Microstructure, mechanical and corrosion properties. Journal of Materials Engineering and Performance26 (4):1626–33. doi: https://doi.org/10.1007/s11665-017-2605-y.
   Web of Science ®Google Scholar
• Akbari, G. H., and R. Barati. 2012. Comprehensive analysis of flooding in unmanaged catchments. Proceedings of the Institution of Civil Engineers - Water Management165 (4):229–38. doi: https://doi.org/10.1680/wama.10.00036.
   Web of Science ®Google Scholar
• Alnajjar, M., F. Christien, K. Wolski, and C. Bosch. 2019. Evidence of austenite by-passing in a stainless steel obtained from laser melting additive manufacturing. Additive Manufacturing25:187–95. doi: https://doi.org/10.1016/j.addma.2018.11.004.
   Web of Science ®Google Scholar
• ASTM International. 2015. Standard test method for shear testing of powders using the Freeman technology. Technical report. West Conshohocken, PA, USA: ASTM International.
   Google Scholar
• Barati, R., S. Rahimi, and G. H. Akbari. 2012. Analysis of dynamic wave model for flood routing in natural rivers. Water Science and Engineering5 (3):243–58.
   Google Scholar
• Bjørk, R., and C. R. H. Bahl. 2013. Demagnetization factor for a powder of randomly packed spherical particles. Applied Physics Letters103 (10):102403. doi: https://doi.org/10.1063/1.4820141.
   Web of Science ®Google Scholar
• Boyce, C. M. 2018. Gas-solid fluidization with liquid bridging: A review from a modeling perspective. Powder Technology336:12–29. doi: https://doi.org/10.1016/j.powtec.2018.05.027.
   Web of Science ®Google Scholar
• Carroll, P. A., A. J. Pinkerton, J. Allen, W. U. H. Syed, H. K. Sezer, P. Brown, G. Ng, R. Scudamore, and L. Li. 2006. The effect of powder recycling in direct metal laser deposition on powder and manufactured part characteristics. In Proceedings of AVT-139 Specialists Meeting on Cost Effective Manufacture via Net Shape Processing. NATO Research and Technology Organisation, Neuilly, Paris, France, March 23–27.
   Google Scholar
• Chang, C.,X. Yan, R. Bolot, J. Gardan, S. Gao, M. Liu, H. Liao, M. Chemkhi, and S. Deng. 2020. Influence of post-heat treatments on the mechanical properties of CX stainless steel fabricated by selective laser melting. Journal of Materials Science55 (19):8303–16. doi: https://doi.org/10.1007/s10853-020-04566-x.
   Web of Science ®Google Scholar
• Chaudhuri, B., A. Mehrotra, F. J. Muzzio, and M. S. Tomassone. 2006. Cohesive effects in powder mixing in a tumbling blender. Powder Technology165 (2):105–14. doi: https://doi.org/10.1016/j.powtec.2006.04.001.
   Web of Science ®Google Scholar
• Dai, L., Y. R. Chan, G. Vastola, N. Khan, S. Raghavan, and Y. W. Zhang. 2021. Characterizing the intrinsic properties of powder – a combined discrete element analysis and Hall flowmeter testing study. Advanced Powder Technology32 (1):80–7. doi: https://doi.org/10.1016/j.apt.2020.11.015.
   Web of Science ®Google Scholar
• Dobson, S. D., and T. L. Starr. 2021. Powder characterization and part density for powder bed fusion of 17-4 PH stainless steel. Rapid Prototyping Journal27 (1):53–8. doi: https://doi.org/10.1108/RPJ-01-2020-0023.
   Web of Science ®Google Scholar
• Edwards, B. F., D. M. Riffe, J.-Y. Ji, and W. A. Booth. 2017. Interactions between uniformly magnetized spheres. American Journal of Physics85 (2):130–4. doi: https://doi.org/10.1119/1.4973409.
   Web of Science ®Google Scholar
• Ennis, B. J., G. Tardos, and R. Pfeffer. 1991. A microlevel-based characterization of granulation phenomena. Powder Technology65 (1–3):257–72. doi: https://doi.org/10.1016/0032-5910(91)80189-P.
   Web of Science ®Google Scholar
• Feng, J. Q., and D. A. Hays. 2003. Relative importance of electrostatic forces on powder particles. Powder Technology135–136:65–75. doi: https://doi.org/10.1016/j.powtec.2003.08.005.
   Web of Science ®Google Scholar
• Harkin, R., H. Wu, S. Nikam, J. Quinn, and S. McFadden. 2020. Reuse of grade 23 ti6al4v powder during the laser-based powder bed fusion process. Metals10 (12):1700–14. doi: https://doi.org/10.3390/met10121700.
   Web of Science ®Google Scholar
• Hengsbach, F., P. Koppa, K. Duschik, M. J. Holzweissig, M. Burns, J. Nellesen, W. Tillmann, T. Tröster, K. P. Hoyer, and M. Schaper. 2017. Duplex stainless steel fabricated by selective laser melting –microstructural and mechanical properties. Materials & Design 133:136–42. doi: https://doi.org/10.1016/j.matdes.2017.07.046.
   Web of Science ®Google Scholar
• Hulme-Smith, C. N. 2021. Research dataset for flow behaviour of magnetic steel powder. doi: https://doi.org/10.5281/zenodo.5070929.
   Google Scholar
• International Organization for Standardization.1977. ISO 4324: Surface active agents – powders and granules –measurement of the angle of repose. Geneva, Switzerland: International Organisation for Standardization.
   Google Scholar
• International Organization for Standardization 2014. ISO 13322-1:2014: particle size analysis – image analysis methods –part 1: Static image analysis methods. Geneva, Switzerland: International Organization for Standardization.
   Google Scholar
• International Organization for Standardization 2018. ISO 4490:2018 metallic powders – determination of flow rate by means of a calibrated funnel (Hall flowmeter). Geneva, Switzerland: International Organization for Standardization.
   Google Scholar
• International Organization for Standardization.2020. Additive manufacturing. Feedstock materials. Methods to characterize metal powders. Geneva, Switzerland: International Organization for Standardization.
   Google Scholar
• Jerrard, P. G., L. Hao, and K. E. Evans. 2009. Experimental investigation into selective laser melting of austenitic and martensitic stainless steel powder mixtures. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture223 (11):1409–16. doi: https://doi.org/10.1243/09544054JEM1574.
   Web of Science ®Google Scholar
• Jones, R., H. M. Pollock, D. Geldart, and A. Verlinden. 2003. Inter-particle forces in cohesive powders studied by AFM: Effects of relative humidity, particle size and wall adhesion. Powder Technology132 (2–3):196–210. doi: https://doi.org/10.1016/S0032-5910(03)00072-X.
   Web of Science ®Google Scholar
• Koistinen, D. P., and R. E. Marburger. 1959. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels. Acta Metallurgica7 (1):59–60. doi: https://doi.org/10.1016/0001-6160(59)90170-1.
   Google Scholar
• Kulkarni, P. A., R. J. Berry, and M. S. Bradley. 2010. Review of the flowability measuring techniques for powder metallurgy industry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering224 (3):159–68. doi: https://doi.org/10.1243/09544089JPME299.
   Web of Science ®Google Scholar
• Lapple, C. E., and G. O. Adhesion. 1970. Electrostatic phenomena with particulates. In Advances in Chemical Engineering, ed.T. B. Drew, G. R. Cokelet, J. W. Hoopes, and T. Vermeulen, vol. 8, 1–96. Cambridge, MA: Academic Press, Inc.
   Google Scholar
• Liu, L. X., I. Marziano, A. C. Bentham, J. D. Litster, E. T. White, and T. Howes. 2008. Effect of particle properties on the flowability of ibuprofen powders. International Journal of Pharmaceutics362 (1–2):109–17. doi: https://doi.org/10.1016/j.ijpharm.2008.06.023.
   PubMed Web of Science ®Google Scholar
• Liu, Y., A. Li, X. Cheng, S. Q. Zhang, and H. M. Wang. 2016. Effects of heat treatment on microstructure and tensile properties of laser melting deposited AISI 431 martensitic stainless steel. Materials Science and Engineering: A 666:27–33. doi: https://doi.org/10.1016/j.msea.2016.04.014.
   Web of Science ®Google Scholar
• Lutterotti, L., S. Matthies, and H.-R. Wenk. 1999. MAUD (material analysis using diffraction): A user friendly Java program for Rietveld texture analysis and more. In Proceeding of the Twelfth International Conference on Textures of Materials (ICOTOM-12), McGill University, Montreal, Canada, August 9–13.
   Google Scholar
• Maugis, D. 1987. Adherence of elastomers: Fracture mechanics aspects. Journal of Adhesion Science and Technology1 (1):105–34. doi: https://doi.org/10.1163/156856187X00120.
   Google Scholar
• McCusker, L. B., R. B. Von Dreele, D. E. Cox, D. Louër, P. Scardi, D. Louër, and P. Scardi. 1999.Rietveld refinement guidelines. Journal of Applied Crystallography32 (1):36–50. doi: https://doi.org/10.1107/S0021889898009856.
   Web of Science ®Google Scholar
• Meier, C., R. Weissbach, J. Weinberg, W. A. Wall, and A. J. Hart. 2019. Modeling and characterization of cohesion in fine metal powders with a focus on additive manufacturing process simulations. Powder Technology343:855–66. doi: https://doi.org/10.1016/j.powtec.2018.11.072.
   Web of Science ®Google Scholar
• Mikami, T., H. Kamiya, and M. Horio. 1998. Numerical simulation of cohesive powder behavior in a fluidized bed. Chemical Engineering Science53 (10):1927–40. doi: https://doi.org/10.1016/S0009-2509(97)00325-4.
   Web of Science ®Google Scholar
• Moghadasi, M., W. Du, M. Li, Z. Pei, and C. Ma. 2020. Ceramic binder jetting additive manufacturing: Effects of particle size on feedstock powder and final part properties. Ceramics International46 (10):16966–72. doi: https://doi.org/10.1016/j.ceramint.2020.03.280.
   Web of Science ®Google Scholar
• Molerus, O. 1975. Theory of yield of cohesive powders. Powder Technology12 (3):259–75. doi: https://doi.org/10.1016/0032-5910(75)85025-X.
   Web of Science ®Google Scholar
• Mukherjee, R., C. Mao, S. Chattoraj, and B. Chaudhuri. 2018. DEM based computational model to predict moisture induced cohesion in pharmaceutical powders. International Journal of Pharmaceutics536 (1):301–9. doi: https://doi.org/10.1016/j.ijpharm.2017.12.001.
   PubMed Web of Science ®Google Scholar
• Murr, L. E., E. Martinez, J. Hernandez, S. Collins, K. N. Amato, S. M. Gaytan, and P. W. Shindo. 2012. Microstructures and properties of 17-4 PH stainless steel fabricated by selective laser melting. Journal of Materials Research and Technology1 (3):167–77. doi: https://doi.org/10.1016/S2238-7854(12)70029-7.
   Google Scholar
• Mutsers, S. M., and K. Rietema. 1977. The effect of interparticle forces on the expansion of a homogeneous gas-fluidized bed. Powder Technology18 (2):239–48. doi: https://doi.org/10.1016/0032-5910(77)80014-4.
   Web of Science ®Google Scholar
• Nguyen, Q. B., M. L. S. Nai, Z. Zhu, C.-N N. Sun, J. Wei, and W. Zhou. 2017. Characteristics of Inconel powders for powder-bed additive manufacturing. Engineering3 (5):695–700. doi: https://doi.org/10.1016/J.ENG.2017.05.012.
   Web of Science ®Google Scholar
• Olsson, M., and U. Bexell. 2011. Friction characteristics and material transfer tendency in metal powder compaction. Wear271 (9–10):1903–8. doi: https://doi.org/10.1016/j.wear.2011.01.050.
   Web of Science ®Google Scholar
• Osborn, J. A. 1945. Demagnetizing factors of the general ellipsoid. Physical Review67 (11–12):351–7. doi: https://doi.org/10.1103/PhysRev.67.351.
   Web of Science ®Google Scholar
• Oxley, P., J. Goodell, and R. Molt. 2009. Magnetic properties of stainless steels at room and cryogenic temperatures. Journal of Magnetism and Magnetic Materials321 (14):2107–14. doi: https://doi.org/10.1016/j.jmmm.2009.01.002.
   Web of Science ®Google Scholar
• Pérez-Díaz, J. L., M. A. Álvarez-Valenzuela, and J. C. García-Prada. 2012. The effect of the partial pressure of water vapor on the surface tension of the liquid water-air interface. Journal of Colloid and Interface Science381 (1):180–2. doi: https://doi.org/10.1016/j.jcis.2012.05.034.
   PubMed Web of Science ®Google Scholar
• Pitois, O., P. Moucheront, and X. Chateau. 2000. Liquid bridge between two moving spheres: An experimental study of viscosity effects. Journal of Colloid and Interface Science231 (1):26–31. doi: https://doi.org/10.1006/jcis.2000.7096.
   PubMed Web of Science ®Google Scholar
• Ponnusamy, P.,. S. H. Masood, S. Palanisamy, R. A. Rahman Rashid, and D. Ruan. 2017. Characterization of 17-4PH alloy processed by selective laser melting. Materials Today: Proceedings4 (8):8498–506. doi: https://doi.org/10.1016/j.matpr.2017.07.196.
   Google Scholar
• Popov, V. V., A. Katz-Demyanetz, A. Garkun, and M. Bamberger. 2018. The effect of powder recycling on the mechanical properties and microstructure of electron beam melted Ti-6Al-4V specimens. Additive Manufacturing22 (May):834–43. doi: https://doi.org/10.1016/j.addma.2018.06.003.
   Web of Science ®Google Scholar
• Rietema, K. 1991. The dynamics of fine powders. Dordrecht: Springer Netherlands.
   Google Scholar
• Rock, C., C. Ledford, M. Garcia-Avila, H. West, V. M. Miller, M. Pankow, R. Dehoff, and T. Horn. 2021.The influence of powder reuse on the properties of nickel super alloy ATI 718TM in laser powder bed fusion additive manufacturing. Metallurgical and Materials Transactions B52 (2):676–88. doi: https://doi.org/10.1007/s11663-020-02040-2.
   Web of Science ®Google Scholar
• Rumpf, H. 1958. Grundlagen und Methoden des Granulierens. Chemie Ingenieur Technik – CIT30 (3):144–58. doi: https://doi.org/10.1002/cite.330300307.
   Google Scholar
• Schneider, C. A., W. S. Rasband, and K. W. Eliceiri. 2012. NIH image to ImageJ: 25 Years of image analysis. Nature Methods9 (7):671–5. doi: https://doi.org/10.1038/nmeth.2089.
   PubMed Web of Science ®Google Scholar
• Solimanjad, N. 2003. New method for measuring and characterisation of friction coefficient at wide range of densities in metal powder compaction. Powder Metallurgy46 (1):49–54. doi: https://doi.org/10.1179/003258903225010488.
   Web of Science ®Google Scholar
• Stanford, K. 2002. Particle size effects plasma on flow feedstock properties powder of blend. Technical report, NASA Center for Aerospace Information, Hanover, MD and/or National Technical Information Service, Springfield, VA.
   Google Scholar
• Stanford, M. K., and C. DellaCorte. 2006. Effects of humidity on the flow characteristics of a composite plasma spray powder. Journal of Thermal Spray Technology15 (1):33–6. doi: https://doi.org/10.1361/105996306X92550.
   Web of Science ®Google Scholar
• Tang, H. P., M. Qian, N. Liu, X. Z. Zhang, G. Y. Yang, and J. Wang. 2015. Effect of powder reuse times on additive manufacturing of Ti-6Al-4V by selective electron beam melting. Journal of the Minerals Metals and Materials Society. 67 (3):555–63. doi: https://doi.org/10.1007/s11837-015-1300-4.
   Web of Science ®Google Scholar
• Terrassa, K. L., J. C. Haley, B. E. MacDonald, and J. M. Schoenung. 2018. Reuse of powder feedstock for directed energy deposition. Powder Technology338:819–29. doi: https://doi.org/10.1016/j.powtec.2018.07.065.
   Web of Science ®Google Scholar
• Tolias, P. 2020. Non-retarded room temperature Hamaker constants between elemental metals. Surface Science700 (June):121652. doi: https://doi.org/10.1016/j.susc.2020.121652.
   Web of Science ®Google Scholar
• Tomas, J., and S. Kleinschmidt. 2009. Improvement of flowability of fine cohesive powders by flow additives. Chemical Engineering & Technology32 (10):1470–83. doi: https://doi.org/10.1002/ceat.200900173.
   Web of Science ®Google Scholar
• Turner, G. A., and M. Balasubramanian. 1974. Investigations of the contributions to the tensile strength of weak particulate masses. Powder Technology10 (3):121–7. doi: https://doi.org/10.1016/0032-5910(74)80037-9.
   Web of Science ®Google Scholar
• Underwood, E. E. 1984. Particle size distribution. In Quantitative microscopy, chapter particle s, ed. F. N. Rhines and R. T. Dehoff,149–200. New York, N. Y., U. S. A.: McGraw-Hill.
   Google Scholar
• Vasquez, E., P. F. Giroux, F. Lomello, M. Nussbaum, H. Maskrot, F. Schuster, and P. Castany. 2020. Effect of powder characteristics on production of oxide dispersion strengthened Fe14Cr steel by laser powder bed fusion. Powder Technology360:998–1005. doi: https://doi.org/10.1016/j.powtec.2019.11.022.
   Web of Science ®Google Scholar
• Visser, J. 1989. Van der Waals and other cohesive forces affecting powder fluidization. Powder Technology58 (1):1–10. doi: https://doi.org/10.1016/0032-5910(89)80001-4.
   Web of Science ®Google Scholar
• Vlachos, N., and I. T. Chang. 2011. Investigation of flow properties of metal powders from narrow particle size distribution to polydisperse mixtures through an improved Hall-flowmeter. Powder Technology205 (1–3):71–80. doi: https://doi.org/10.1016/j.powtec.2010.08.067.
   Web of Science ®Google Scholar
• Wright, P. C., and J. A. Raper. 1998. Examination of dispersed liquid-phase three-phase fluidized beds Part 1. Non-porous, uniform particle systems. Powder Technology97 (3):208–26. doi: https://doi.org/10.1016/S0032-5910(98)00014-X.
   Web of Science ®Google Scholar
• Yang, S., and J. R. Evans. 2005. Flow rate of metal powders at reduced and elevated air pressure. Powder Technology154 (2–3):95–8. doi: https://doi.org/10.1016/j.powtec.2005.04.038.
   Web of Science ®Google Scholar
• Zhu, H., Y. Li, B. Li, Z. Zhang, and C. Qiu. 2018. Effects of low-temperature tempering on microstructure and properties of the laser-cladded AISI 420 martensitic stainless steel coating. Coatings8 (12):451–10. doi: https://doi.org/10.3390/coatings8120451.
   Web of Science ®Google Scholar
• Zhu, X., Q. Zhang, C. Huang, Y. Wang, C. Yang, and F. Wei. 2017. Validation of surface coating with nanoparticles to improve the flowability of fine cohesive powders. Particuology30:53–61. doi: https://doi.org/10.1016/j.partic.2016.09.001.
   Web of Science ®Google Scholar
• Zhukov, A., B. Barakhtin, and P. Kuznetsov. 2017. Study of strength characteristics of steel specimens after selective laser melting of powder materials 17-4PH, 316L, 321. Physics Procedia89:179–86. doi: https://doi.org/10.1016/j.phpro.2017.08.012.
   Google Scholar
• Zimon, A. D., and M. Corn. 1969. Adhesion of dust and powder. Boston, MA: Springer US.
   Google Scholar