References
- Al Mahdi, R., A. Nasirpour, S. Banon, J. Scher, and S. Desobry. 2006. Morphological and mechanical properties of dried skimmed milk and wheat flour mixtures during storage. Powder Technology 163 (3):145–51. doi: https://doi.org/10.1016/j.powtec.2006.01.012.
- Antony, S. J., M. Al-Sharabi, N. Rahmanian, and T. Barakat. 2015. Shear stress distribution within narrowly constrained structured grains and granulated powder beds. Advanced Powder Technology 26 (6):1702–11. doi: https://doi.org/10.1016/j.apt.2015.10.011.
- Azhdar, B., B. Stenberg, and L. Kari. 2006. Determination of dynamic and sliding friction, and observation of stick-slip phenomenon on compacted polymer powders during high-velocity compaction. Polymer Testing 25 (8):1069–80. doi: https://doi.org/10.1016/j.polymertesting.2006.07.009.
- Bagga, P., G. Brisson, A. Baldwin, and C. E. Davies. 2012. Stick-slip behavior of dairy powders: Temperature effects. Powder Technology 223:46–51. doi: https://doi.org/10.1016/j.powtec.2011.05.015.
- Barel, I., M. Urbakh, L. Jansen, and A. Schirmeisen. 2011. Unexpected temperature and velocity dependencies of atomic-scale stick-slip friction. Physical Review B 84 (11):1–7. doi: https://doi.org/10.1103/PhysRevB.84.115417.
- Bhushan, B. 1998. Handbook of micro/nano tribology. Boca Raton: CRC Press.
- Budny, J. T. 1979. Friction as a method of powder flow characterization. Powder Technology 23 (2):197–201. doi: https://doi.org/10.1016/0032-5910(79)87007-2.
- Cain, R. G., N. W. Page, and S. Biggs. 2001. Microscopic and macroscopic aspects of stick-slip motion in granular shear. Physical Review E, Statistical, Nonlinear, and Soft Matter Physics 64 (1 Pt 2):016413. doi: https://doi.org/10.1103/PhysRevE.64.016413.
- Coelho, M. C., and N. Harnby. 1978. Moisture bonding in powders. Powder Technology 20 (2):201–5. doi: https://doi.org/10.1016/0032-5910(78)80049-7.
- Crouter, A., and L. Briens. 2014. The Effect of Moisture on the Flowability of Pharmaceutical Excipients. AAPS PharmSciTech 15 (1):65–74. doi: https://doi.org/10.1208/s12249-013-0036-0.
- Emery, E., J. Oliver, T. Pugsley, J. Sharma, and J. Zhou. 2009. Flowability of moist pharmaceutical powders. Powder Technology 189 (3):409–15. doi: https://doi.org/10.1016/j.powtec.2008.06.017.
- Forsyth, A. J., S. Hutton, and M. J. Rhodes. 2002. Effect of cohesive interparticle force on the flow characteristics of granular material. Powder Technology 126 (2):150–4. doi: https://doi.org/10.1016/S0032-5910(02)00046-3.
- Freeman, R. 2007. Measuring the flow properties of consolidated, conditioned and aerated powders – a comparative study using a powder rheometer and a rotational shear cell. Powder Technology 174 (1–2):25–33. doi: https://doi.org/10.1016/j.powtec.2006.10.016.
- Gerritsen, A. H., and S. Stemerding. 1980. Crackling of powdered materials during moderate compression. Powder Technology 27 (2):183–8. doi: https://doi.org/10.1016/0032-5910(80)85020-0.
- Ghoroi, C., X. Han, D. To, L. Jallo, L. Gurumurthy, and R. N. Davé. 2013. Dispersion of fine and ultrafine powders through surface modification and rapid expansion. Chemical Engineering Science 85:11–24. doi: https://doi.org/10.1016/j.ces.2012.02.038.
- Halsey, T. C., and A. J. Levine. 1998. How sandcastles fall. Physical Review Letters 80 (14):3141–4. doi: https://doi.org/10.1103/PhysRevLett.80.3141.
- Hamrock, B. J., S. R. Schmid, and B. O. Jacobson. 2004. Fundamentals of fluid film lubrication. Boca Raton: CRC Press.
- Howell, D. W., R. P. Behringer, and C. T. Veje. 1999. Fluctuations in granular media. Chaos: An Interdisciplinary Journal of Nonlinear Science 9 (3):559–72. doi: https://doi.org/10.1063/1.166430.
- Karde, V., and C. Ghoroi. 2014. Influence of surface modification on wettability and surface energy characteristics of pharmaceutical excipient powders. International Journal of Pharmaceutics 475 (1–2):351–63. doi: https://doi.org/10.1016/j.ijpharm.2014.09.002.
- Karde, V., and C. Ghoroi. 2015. Fine powder flow under humid environmental conditions from the perspective of surface energy. International Journal of Pharmaceutics 485 (1–2):192–201. doi: https://doi.org/10.1016/j.ijpharm.2015.03.021.
- Karde, V., D. Dixit, and C. Ghoroi. 2017. Adhesion force approximation at varying consolidation stresses for fine powder under humid conditions. Advanced Powder Technology 28 (2):346–55. doi: https://doi.org/10.1016/j.apt.2016.09.023.
- Karde, V., S. Panda, and C. Ghoroi. 2015. Surface modification to improve powder bulk behavior under humid conditions. Powder Technology 278:181–8. doi: https://doi.org/10.1016/j.powtec.2015.03.025.
- Klein, J., and E. Kumacheva. 1995. Confinement-induced phase transitions in simple liquids. Science 269 (5225):816–9.
- Li, T. D., J. Gao, R. Szoszkiewicz, U. Landman, and E. Riedo. 2007. Structured and viscous water in subnanometer gaps. Physical Review B 75 (11):1–6. doi: https://doi.org/10.1103/PhysRevB.75.115415.
- Lubert, M., and A. de Ryck. 2001. Slip events and dilatancy in a sheared fine noncohesive powder. Physical Review E, Statistical, Nonlinear, and Soft Matter Physics 63 (2 Pt 1):021502. doi: https://doi.org/10.1103/PhysRevE.63.021502.
- Medhe, M.,. B. Pitchumani, and J. Tomas. 2005. Flow characterization of fine powders using material characteristic parameters. Advanced Powder Technology 16 (2):123–35. doi: https://doi.org/10.1163/1568552053621687.
- Pant, A., G. V. Ramana, and M. Datta. 2020. Stick-slip behavior of dry fly ash. Particulate Science and Technology 38 (5):605–16. doi: https://doi.org/10.1080/02726351.2019.1571543.
- Pfeffer, R., R. N. Dave, D. Wei, and M. Ramlakhan. 2001. Synthesis of engineered particulates with tailored properties using dry particle coating. Powder Technology 117 (1–2):40–67. doi: https://doi.org/10.1016/S0032-5910(01)00314-X.
- Roberts, A. W., and C. M. Wensrich. 2002. Flow dynamics or “quaking” in gravity discharge from silos. Chemical Engineering Science 57 (2):295–305. doi: https://doi.org/10.1016/S0009-2509(01)00377-3.
- Salehi, H., V. Karde, H. Hajmohammadi, S. Dissanayake, S. H. Larsson, J. Y. Y. Heng, and M. Bradley. 2021. Understanding flow properties of mannitol powder at a range of temperature and humidity. International Journal of Pharmaceutics 596:120244. doi: https://doi.org/10.1016/j.ijpharm.2021.120244.
- Schulze, D. 2003. Time- and velocity-dependent properties of powders effecting slip-stick oscillations. Chemical Engineering & Technology 26 (10):1047–51. doi: https://doi.org/10.1002/ceat.200303112.
- Schulze, D. 2008. Powders and bulk solids-behaviour, charecterization, storage and flow. New York, NY: Springer.
- Stasiak, M., R. Rusinek, M. Molenda, J. Fornal, and W. Błaszczak. 2011. Effect of potato starch modification on mechanical parameters and granules morphology. Journal of Food Engineering 102 (2):154–62. doi: https://doi.org/10.1016/j.jfoodeng.2010.07.034.
- Stribeck, R. 1903. Die wesentlichen Eigenschaften der Gleit- und Rollenlager. Berlin: Springer.
- Tardos, G. I., S. Mcnamara, and I. Talu. 2003. Slow and intermediate flow of a frictional bulk powder in the Couette geometry. Powder Technology 131 (1):23–39. doi: https://doi.org/10.1016/S0032-5910(02)00315-7.
- Tordesillas, A., J. E. Hilton, and S. T. Tobin. 2014. Stick-slip and force chain evolution in a granular bed in response to a grain intruder. Physical Review E 89 (4):14–6. doi: https://doi.org/10.1103/PhysRevE.89.042207.
- USP30-NF25. 2007. Corn starch. Vol. 30, 1223. United States Pharmacopeial Convention. Rockville, MD.
- Yang, B. D., M. L. Chu, and C. H. Menq. 1998. Stick–slip–separation analysis and non-linear stiffness and damping characterization of friction contacts having variable contact load. Journal of Sound and Vibration 210 (4):461–81. doi: https://doi.org/10.1006/jsvi.1997.1305.
- Yoshizawa, H., and J. Israelachvili. 1993. Fundamental mechanisms of interfacial friction. 2. Stick-slip friction of spherical and chain molecules. The Journal of Physical Chemistry 97 (43):11300–13. doi: https://doi.org/10.1021/j100145a031.